At 10:45 we will enter the ESR and install a remote oscilloscope for the PLEIADES outside detector. Should take only 10 "GSI" minutes ;-)
After that, ESR tuning to 192Pb can start.

We stop taking beam at 10:47 for tuning a new setting. 

Team PLEIADES is wanting to get access for 10 mins to install a remote oscilloscope, so entry to the ESR has been requested. 

Beam was gone at 13:04 due to fragment tuning.

Today, until 11 am, data were taken for the 188Hf setting. Since then, we are now tuning on the 192Pb82+.

here are all TOML config files of the automatic scripts.

step by step pictures:

sometimes the name of the motor connection is not available in the menu, it should be added manually.

Add MBOX:

put some name, like "410 MHz Schottky Cavity in ESR"
put the IP address: 140.181.139.194

press connect

change to local control

press initialize

go to motor drive

go to motor 1 and 2

always move same value for both motors.