|
HOME
ESR
EXPERIMENTS
LABS etc
|
|
E121
E127
E132
E125
E143
laser_cooling_2021
E142
Ê128
E146
E0052
E0018
E0028
E0038
|
| proton-capture on 118Te |
Not logged in |
 |
|
|
|
Message ID: 277
Entry time: Thu Apr 23 19:09:58 2020
|
| Author: |
Laszlo |
| Category: |
Calibration |
| Subject: |
theoretical K-REC cross sections |
| Year: |
|
|
|
Find attached Andrey Surzhykov's calculations for the theta angle in respect to the beam direction (in lab. frame) vs. cross section for 124Xe54+ and 118Te52+.
The calculations made for collision with two H atoms with the accuracy of 1%. There are no molecular corrections done, but these corrections are within 1%.
The photon-emission is symmetrical in the azimuthal phi angle, but asymetric in theta. The K-REC cross section is given for each integer theta angle. The problem is that our 90° and 145° xray detectors cover more integer theta-angles --> The disk shaped entrance window of the Xray-detectors is sliced for each covered theta angles, and the CS values are averaged together with the weights of the area of the corresponding slice. The 35° det had a non-disk shaped slit collimator! Was it aligned vertical or horizontal or random? I assumed that it had a vertical position --> only cs at theta=35° needs to taken into account
|
| 90° | 145° | 35°
| | weighted cs_Xe [barn/sr] | 128,444 | 41,967 | 45,550
| | weighted cs_Te [barn/sr] | 118,616 | 38,918 | 41,740
|
For the steradian values I calculated the area of the entrance window of the Xray detectors and I divided it with the area of the sphere with radius = distance between source and det. If r=radius of the entrance window, D=distance between source and det.: covered steradian = r^2*pi/(4*pi*D^2) [%], covered steradian = 4Pi*[r^2*pi/(4*pi*D^2)] [4pi]. This is valid for the 90° and 145° Xray detectors. The area of 35° det. was calculated individually.
|
| 90° | 145° | 35°
| | sr [%] | 0,00237 | 0,00076 | 0,00002
| | sr [4pi] | 0,0298 | 0,0096 | 0,00030
|
I converted barn/sr to barn in the following way: steradian[4pi]*weigthed_cs [barn/sr] = weigthed_cs [barn]. I am not 100% sure if I need here the steradian in [4pi] or in [%].
|
| 90° | 145° | 35°
| | weighted cs_Xe [barn] | 3,8247 | 0,4012 | 0,0137
| | weighted cs_Te [barn] | 3,5321 | 0,3720 | 0,0125
|
|
|
|
|
Cannot create thumbnail, please check ImageMagick installation
|
|
|
|
|
|
|
|
|