HOME ESR EXPERIMENTS LABS etc
E121 E127 E132 E125 E143 laser_cooling_2021 E142 Ê128 E146 E0052 E0018 E0028 E0038
  Nuclear hyperfine mixing in 229Th89+  Not logged in ELOG logo
Message ID: 183     Entry time: Sat Apr 9 13:45:42 2022
Author: Max, Kristian 
Category: Runs 
Subject: first scans with LV problem solved! 
This is the first time with LV buffer problem solved (see Elog ID: 184). Before the PMT signals were out of sync with the wavelength data!
We concluded to scan with step sizes of 0.002nm, scan range of 0.5nm (f
nm), dwelltime = 150(5s), loops = 2 (approx.: 30min measurements).

DAQ1: lxg1927:/data.local2/BeamTimeTh22/
DAQ2: lxg0155:/data.local2/E142/
LMD file name DAQ1:229Thor
LMD file name DAQ2:229Th

Shottky marker pos: 243.973MHz

TimeSIS-intensitycooler-HVLMD-DAQ1 start-endLMD-DAQ2 start-endscan range(nm)step width(nm)dwell time(s)comments
11:251.0e92096220102 - 1027839-7839323.2 - 322.80.0023sLV readout problem solved. WM readout is wrong (Cobra set is good)
12:15old beam2096220103 - 1037840-7840323.2 - 322.80.0023s WM readout is wrong
12:502.3e92096170104 - 1047841-7841323.2 - 322.80.0023s couldnt open go4 stream view, stopped after one good scan, WM readout is wrong .
13:202.0e92096170104 - 1057842-7842323.2 - 322.80.0023s first scan with LV correct
13:401.2e92096180106 - 1067843-7843323.2 - 322.80.0023s 3 loops
14:201.5e92096120107 - 1077844-7844323.2 - 322.80.0023s 1 loop


Runs after this have the right cobra set value but propably the wrong WM data until 10.04.22 12:44 (see also ID:198)
ELOG V3.1.5-fc6679b