Beam settings:
primary beam 
copper stripper
I_el=300mA
U_el=205.490kV (Ohm_labs)
3.5e7 ions at injection


MSCF/ADC settings: 
ch2 < Mid PMT x10
ch6 < Mid PMT x100
see attachment (setting_e142....) for detailed MSCF settings

Files/Runs [DAQ2]:

------------------new file-----------------
229Th0022.lmd
bunched beam [ESR in manip. at 7]
beam scraped using detector drives
-SA pos: 0
-NA pos: -10
-Ni pos: 40

no corresponding file in DAQ1

------------------new file-----------------
229Th0023.lmd
bunched beam [ESR in manip. at 7]
beam scraped using detector drives
-SA pos: 0
-NA pos: -10
-Ni pos: 40
laser scan active:
- steps: 21
- cycles: 5

file in DAQ1:
...7768.lmd

------------------new file-----------------
229Th0024.lmd
bunched beam [ESR in manip. at 7]
beam scraped using detector drives
-SA pos: out (-127)
-NA pos: -10
-Ni pos: 40
laser scan active:
- steps: 21
- cycles: 5

file in DAQ1:
...7770.lmd

------------------new file-----------------
229Th0025.lmd
bunched beam [ESR in manip. at 7]
beam scraped using detector drives
-SA pos: 0
-NA pos: -10
-Ni pos: 40
laser scan not:

VUPROM -> delay stop trigger ch12 

file in DAQ1:
no file

no laser scan

------------------new file-----------------
229Th0026.lmd
bunched beam [ESR in manip. at 7]
beam scraped using detector drives
-SA pos: 0
-NA pos: -10
-Ni pos: 40
laser scan active:
- steps: 21
- cycles: 5

VUPROM -> delay stop trigger ch12 

file in DAQ1:
...7772.lmd