(Who let the dog out?)
Sharing with FRS 6:1 since a while now.

First a setting with orbit bump for injection on central orbit was tried.
- quadrupoles tuned and scrapers optimized

Then back to an ESR setting without this bump like last year.
- again quadrupoles tuned and scrapers optimized
This gave a good resolution in which the isomer should be resolved.

Just after this was achieved all resolution was lost.
Making the input for ESR setting again recovered it, now with slightly different scrapers.

Quads: K'L Q3D / Q6D = -0.3603263
Sext: K''L GE01KS2 = -0.14
           GE01KS3 =  0.05

scrapers: GEEXDS1HA =  -5 mm
          GE01DS3HG = -70 mm 

Details see paper scans below.

We are inserting both PLEIADES detectors step-wise, one by one. Main beam should not be affected too long.

step by step pictures:

sometimes the name of the motor connection is not available in the menu, it should be added manually.

Add MBOX:

put some name, like "410 MHz Schottky Cavity in ESR"
put the IP address: 140.181.139.194

press connect

change to local control

press initialize

go to motor drive

go to motor 1 and 2

always move same value for both motors.