| ID |
Date |
Author |
Category |
Subject |
|
113
|
Thu Apr 2 02:36:48 2020 |
Ragan | General | Stochastic cooling and orbit problem |
On 1 April by 5 pm, we could stop the stochastic cooling after the stacking process and also change the orbit of the Tl beam to centre.
Thanks to the efforts by the ESR team ! |
|
18
|
Thu Mar 26 17:21:40 2020 |
Ragan | General | Stochastic cooling |
1) From SIS, 206Pb67+ @401.17 MeV/u goes to FRS where only SEETRAM is placed in the target area to strip off 206Pb67+ to get 206Pb81+.
2) There is 206Pb81+ (H-like primary beam) inside ESR at 400 MeV/u.
3) The ESR team is now trying Stochastic cooling with 206Pb81+ beam at 400 MeV/u. |
|
19
|
Fri Mar 27 13:02:07 2020 |
Ragan | General | Stochastic cooling |
1) ESR team is successful with the Stochstic cooling of primary H-like 206Pb81+ beam @400 MeV/u.
2) Now, they are trying for stacking of the beam. |
| Attachment 1: stochastic_cooling.PNG
|
|
|
133
|
Fri Apr 3 11:52:27 2020 |
Shahab | Runs | Stacking 54 times! |
|
| Attachment 1: 2020-04-03_11-48-11-781.png
|
|
|
138
|
Fri Apr 3 14:08:41 2020 |
Shahab | Runs | Stacking |
|
| Attachment 1: 2020-04-03_14-07-13-250.png
|
|
|
144
|
Sat Apr 4 03:27:48 2020 |
Ragan, Pierre-Michel, Dima, Shahab | Runs | Six hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 6 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 22:11, run0308.lmd
file running: 0312.lmd
_______________________________________________________________________________
time when accumulation starts: 02:52
time when storage starts: 03:22
time when storage ends: 09:22
I_cooler during storage time: -1 mA
I_cooler = 177 mA
I_SIS: 1.75e9
ESR particles after stacking: 1.91e6 (offset 5e5)
Number of stackings: 80
Target ON density: 4.23e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 8 mins
(i.e. time for which electron cooler is on after gas jet)
I_ESR (04:00) : 1,76e6
I_ESR (04:30) : 1,62e6
I_ESR (05:00) : 1,56e6
I_ESR (05:30) : 1,42e6
I_ESR (06:00) : 1,33e6
I_ESR (06:30) : 1,27e6
I_ESR (07:00) : 1,20e6
I_ESR (07:30) : 1.12e6
I_ESR (08:00) : -
I_ESR (08:30) : -
I_ESR (09:00) : 9.8e5
NTCAp file:
SC_2020-04-03_22-12-50
\IQ_2020-04-03_22-13-48
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement |
| Attachment 1: 06F75D44-5DC0-4EF5-A574-C79E559EA8E0.jpeg
|
|
| Attachment 2: E0E0700F-4164-44C8-86D8-8F782D4A81E6.jpeg
|
|
| Attachment 3: 689A47E2-D32B-4721-A6F8-F4FC53BB513E.jpeg
|
|
|
181
|
Tue Dec 15 09:25:41 2020 |
Jan | DAQ | SiCsIPhos signal/amplitude reconstruction |
|
| Attachment 1: amps.pdf
|
|
|
14
|
Fri Feb 21 11:30:52 2020 |
Laszlo | General | Shift plan |
e127: https://docs.google.com/spreadsheets/d/14m8WcCq1erx6HqWJRK7TLbCx121IkjqGa5l-frf4YjI/edit#gid=0
e121: https://docs.google.com/spreadsheets/d/10MUzA5-Ilf2WzCyNj8u_KSG6yzPg0e4vtZGGPFB3K-k/edit#gid=0 |
|
34
|
Sat Mar 28 13:09:11 2020 |
Mei,Yury, Tino, Ragan, Ruijiu | General | Shift plan |
From Yury,
For now, measure the beam life time with 3 different electron current in the e-cooler,i.e. 200mA(default), 10mA, and 20mA. For each current, 4 sets of 30mins long measurements shall be taken.
Starting from 9pm Helmut and Sergey will come for setting up FRS |
|
109
|
Tue Mar 31 21:07:05 2020 |
Ragan | General | Separation of 203Tl80+ and 200Hg79+ using scrapper in ESR |
It can be seen in the video how 203Tl80+ (on extreme left) and then 200Hg79+ (in middle originally) is separted from 205Tl81+ by using scrapper in ESR.
Now, we want 205Pb81+ mixed with 205Tl81+ to be separated as much as possible in FRS. |
| Attachment 1: 06B012F5-5435-41D7-AD82-4A5FDADF281E.MOV
|
|
69
|
Mon Mar 30 02:27:44 2020 |
Ragan | Runs | Second measurement with 206Pb81+ beam at I_cooler = 200 mA |
I_cooler = 200 mA
beam: 206Pb81+
energy: 400 MeV/u
purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas
Detector position (CsISiPHOS): 60 mm
Detector position (MWPC): -10 mm
run start at 02:24 , run file: run0267.lmd (0266.lmd is garbage file)
run stop at :
_______________________________________________________________________________
time: 02:24
I_cooler = 176 mA
SIS particles before: 2.5E8
ESR particles: 4.9E6
NTCAp file:
SC_2020-03-30_02-27-10
IQ_2020-03-30_02-27-10
(saved in drive: p)
copy and repeat the above (below the line) every 30 minutes |
|
71
|
Mon Mar 30 02:58:51 2020 |
Sergiy, Dima | Runs | Second measurement with 206Pb81+ beam at I_cooler = 200 mA |
I_cooler = 200 mA
beam: 206Pb81+
energy: 400 MeV/u
purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas
Detector position (CsISiPHOS): 60 mm
Detector position (MWPC): -10 mm
run start at 02:24 , run file: run0267.lmd (0266.lmd is garbage file)
file running: 0267.lmd
_______________________________________________________________________________
time: 03:00
I_cooler = 176 mA
ESR particles: 4.2E6
NTCAp file:
SC_2020-03-30_02-27-10
IQ_2020-03-30_02-27-10
(saved in drive: p)
copy and repeat the above (below the line) every 30 minutes |
|
72
|
Mon Mar 30 03:30:03 2020 |
Sergiy, Dima | Runs | Second measurement with 206Pb81+ beam at I_cooler = 200 mA |
I_cooler = 200 mA
beam: 206Pb81+
energy: 400 MeV/u
purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas
Detector position (CsISiPHOS): 60 mm
Detector position (MWPC): -10 mm
run start at 02:24 , run file: run0267.lmd (0266.lmd is garbage file)
file running: 0267.lmd
_______________________________________________________________________________
time: 03:30
I_cooler = 176 mA
ESR particles: 3.6E6
NTCAp file:
SC_2020-03-30_02-27-10
IQ_2020-03-30_02-27-10
(saved in drive: p)
copy and repeat the above (below the line) every 30 minutes |
|
73
|
Mon Mar 30 04:00:19 2020 |
Sergiy, Dima | Runs | Second measurement with 206Pb81+ beam at I_cooler = 200 mA |
I_cooler = 200 mA
beam: 206Pb81+
energy: 400 MeV/u
purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas
Detector position (CsISiPHOS): 60 mm
Detector position (MWPC): -10 mm
run start at 02:24 , run file: run0267.lmd (0266.lmd is garbage file)
file running: 0267.lmd
_______________________________________________________________________________
time: 04:00
I_cooler = 176 mA
ESR particles: 3.0E6
NTCAp file:
SC_2020-03-30_02-27-10
IQ_2020-03-30_02-27-10
(saved in drive: p)
copy and repeat the above (below the line) every 30 minutes |
|
75
|
Mon Mar 30 04:30:17 2020 |
Sergiy, Dima | Runs | Second measurement with 206Pb81+ beam at I_cooler = 200 mA |
I_cooler = 200 mA
beam: 206Pb81+
energy: 400 MeV/u
purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas
Detector position (CsISiPHOS): 60 mm
Detector position (MWPC): -10 mm
run start at 02:24 , run file: run0267.lmd (0266.lmd is garbage file)
file running: 0267.lmd
_______________________________________________________________________________
time: 04:30
I_cooler = 176 mA
ESR particles: 2.5E6
NTCAp file:
SC_2020-03-30_02-27-10
IQ_2020-03-30_02-27-10
(saved in drive: p)
copy and repeat the above (below the line) every 30 minutes |
|
74
|
Mon Mar 30 04:15:29 2020 |
Ragan | General | Second measurement with 206Pb81+ beam at I_cooler = 200 mA |
In the picture below, a very nice storage of 206Pb81+ at 200 mA electron cooler current for no gas jet target can be seen in ESR. The measurement started at 02:24 and we will now finish it in 5-10 mins. We will now do two more measurements for I_cooler = 10 mA ans 20 mA. |
| Attachment 1: 1A7AE154-6A88-4AED-BA5D-748025FCD226.jpeg
|
|
|
76
|
Mon Mar 30 06:15:13 2020 |
Ragan | Runs | Second measurement with 206Pb81+ beam at I_cooler = 20 mA |
I_cooler = 20 mA
beam: 206Pb81+
energy: 400 MeV/u
purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas
Detector position (CsISiPHOS): 60 mm
Detector position (MWPC): -10 mm
run start at 06:08 , run file: run0270.lmd (0268.lmd and 0269.lmd are garbage files)
run stop at :
_______________________________________________________________________________
time: 06:08
I_cooler = -1 mA
SIS particles before: 2.5E8
ESR particles: 3.01E6
NTCAp file:
SC_2020-03-30_06-11-08
IQ_2020-03-30_06-11-16
(saved in drive: p)
copy and repeat the above (below the line) every 30 minutes |
|
78
|
Mon Mar 30 06:30:52 2020 |
Ragan | Runs | Second measurement with 206Pb81+ beam at I_cooler = 20 mA |
I_cooler = 20 mA
beam: 206Pb81+
energy: 400 MeV/u
purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas
Detector position (CsISiPHOS): 60 mm
Detector position (MWPC): -10 mm
run start at 06:08 , run file: run0270.lmd (0268.lmd and 0269.lmd are garbage files)
file running: 0270.lmd
_______________________________________________________________________________
time: 06:30
I_cooler = -1 mA
ESR particles: 2.6E5
NTCAp file:
SC_2020-03-30_06-11-08
IQ_2020-03-30_06-11-16
(saved in drive: p)
copy and repeat the above (below the line) every 30 minutes |
|
80
|
Mon Mar 30 07:02:15 2020 |
tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 20 mA |
I_cooler = 20 mA
beam: 206Pb81+
energy: 400 MeV/u
purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas
Detector position (CsISiPHOS): 60 mm
Detector position (MWPC): -10 mm
run start at 06:08 , run file: run0270.lmd (0268.lmd and 0269.lmd are garbage files)
file running: 0270.lmd
_______________________________________________________________________________
time: 07:00
I_cooler = -01 mA
ESR particles: 2.2E5
NTCAp file:
SC_2020-03-30_06-11-08
IQ_2020-03-30_06-11-16
(saved in drive: p)
copy and repeat the above (below the line) every 30 minutes |
|
81
|
Mon Mar 30 07:34:06 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 20 mA |
I_cooler = 20 mA
beam: 206Pb81+
energy: 400 MeV/u
purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas
Detector position (CsISiPHOS): 60 mm
Detector position (MWPC): -10 mm
run start at 06:08 , run file: run0270.lmd (0268.lmd and 0269.lmd are garbage files)
file running: 0270.lmd
_______________________________________________________________________________
time: 07:30
I_cooler = -01 mA
ESR particles: 2.8E5
NTCAp file:
SC_2020-03-30_06-11-08
IQ_2020-03-30_06-11-16
(saved in drive: p)
copy and repeat the above (below the line) every 30 minutes |