Version 15.17.7
{============================= Main Part ======================================}
[general]
File = C:/Users/weick/Desktop/124Xe_118Te_2mmSci_newoptics.lpp
Date = 21-05-2021
Time = 21:33:02
Configuration = GSI\FRS - TA-ESR.lcn
Optionsfile = A1900_2010.lopt
Title = GSI FRS TA-ESR
BlockStructure = DSMDAMWSDMSDMASD
NumberOfBlocks = 16
[settings]
A,Z,Q = 124Xe54+ ; Mass ElementName Charge+ Beam
Energy = 552.595 MeV/u
Intensity = 3e+9 pps ; enA,pna,pps,kW
RF frequency = 20 MHz
Bunch length = 1 ns
Settings on A,Z = 118Te ; Mass ElementName Charge+ Beam
[OpticsBeam]
BX = 1 (+/-)mm ; one-half the horisontal beam extent (x)
BT = 5 (+/-)mrad ; one-half the horisontal beam divergence(x')
BY = 1.5 (+/-)mm ; one-half the vertical beam extent (y)
BF = 3.33 (+/-)mrad ; one-half the vertical beam divergence (y')
BL = 0 (+/-)mm
BD = 0.05 (+/-)% ; one-half of the momentum spread (dp/p)
ShiftX = 0 mm ; beam respect to the spectrometer axis
AngleX = 0 mrad ; beam respect to the spectrometer axis
ShiftY = 0 mm ; beam respect to the spectrometer axis
AngleY = 0 mrad ; beam respect to the spectrometer axis
Scheme Angle = 0 degrees
ShapeX = 1
ShapeT = 1
ShapeY = 1
ShapeF = 1
ShapeL = 1
ShapeD = 1
OptBeam_X = 1 (+/-)mm
OptBeam_T = 30 (+/-)mrad
OptBeam_Y = 1 (+/-)mm
OptBeam_F = 30 (+/-)mrad
OptBeam_L = 0 (+/-)mm
OptBeam_D = 1.5 (+/-)%
[options]
NP simple = 32 ; Number of points in distribution
NP charge states = 64 ; Number of points in distribution
NP wedge = 32 ; Number of points in distribution
Charge states = Yes ; No & Yes
CutEdgeEffect = 1 ; 1-Yes. Default, 0-no - for extended configurations
Prim.beam scatter = 0 ; 0-without, 1-with
Delta peak = 0 ; 0-without, 1-with
BrhoMeanMax = 1 ; 0-Max, 1-Mean
BrhoMeMaLeRi = 3 ; 0-Max, 1-Mean, 2-Left, 3-Right /for fission/
[target]
Target contents = 0,4,1,9.012 ; Nomer,Z,Atoms,Mass
Target thickness = 1,2513,1.848,0,0,0 ; State,Thickness,density,angle,SolidGas,..
Target fusion compound = 0
Targ use for Q-states = 1
Target Defect = 1,0 ; [0] choice - % or micron at 0 degree, [1]=value;
Degrader contents = 0,41,1,92.906 ; Nomer,Z,Atoms,Mass
Degrader thickness = 1,0,8.57,0,0,0 ; State,Thickness,density,angle,SolidGas,..
Degra use for Q-states = 1
Degrader Defect = 1,0 ; [0] choice - % or micron at 0 degree, [1]=value;
[mechanism]
Reaction = 0 ; 0 - fragm, 1 - fusion-resid, 2 - fusion-fission
CalcOther = 1 ; calculate other reactions
V calculation = 5 ; 0 - constant, 1 - Borrel, 2 - Rami, 3-convolution, 4-two body reaction
V_opt/Vbeam = 1 ; default 1
Velocity_exceed = 1 ; 0 - without, 1-with - two-body recations velocity corrections
Binding Energy for Vf/Vp = 8 MeV ; Binding energy for Borrel's expression
Shift for Vf/Vp calc = 0
Prefragment_Rami = 1 ; 1-Yes, 0-No
Sigma0 = 90 MeV/c ; default 90
SigmaD = 0 MeV/c ; default 200
SigmaM = 87 MeV/c ; default 87
Asymmetry = 0 % ; default 0
Method v-sigma = 0 ; 0 - Goldhaber, 1-Morrissey,2-Friedman,3-Convolution
G_Surface = 0.95 MeV/fm^2
Symmetry around half_Ab = 1 ; 1 - yes, 0-no
Pfaff pickup correction = 0 ; 1 - yes, 0-no
ChargeExchangePfaff = 1 ; 1 - exclude, 0-forget
Sigma corr 0 = 0 ; Coulomb energy
Sigma corr 1 = 0 ; Projectile mass
Friedman mode = 2 ; 0-Qgg, 1-Surface, 2-Qgg+Surface
Prefragment_Fri = 1 ; 1-Yes, 0-No
Coulomb_Friedman = 1 ; 1-Yes, 0-No
K_Morr = 8 MeV/A ; E/A=8MeV/A default; D.Morrissey coef.
K_MorHalf = 8 MeV/A ; E/A=8MeV/A default at Afrag=Aproj/2; D.Morrissey coef.
AA_fast = 0 ; 1-Yes, 0-No
MethodApf = 2 ; Prefragment search method: 0-N/Z direction, 1 - W*EPAX, 2 - W*CSgeom,
ExcitationApf = 1 ; Excitation energy for APF search: 0 - dSurface, 1 - dA*Ex
BarrierShape = 1 ; 0-classical, 1-quantum mech.
H_omega = 5 MeV ; default 3
Probabilty_CN = 1 ; 0/1 use Prbabilty for CN formation
UseVanishing = 1 ; 1-Yes, 0-No
VanishMode = 0 ; 0-Sierk, 1-Cohen
NuclPotential = 1 ; 0-Bass, 1-WS
WS_V0 = 105 MeV
WS_R0 = 1.12 fm
WS_a = 0.75 fm
FusDiffuseness = 1
Width Coef = 1 ; default 1; for Leon's charge state distribution
gZt Correction = 1 ; default 1; Leon's C.S.D.
PowerCoefLeon = 0.477 ; default 0.477; Leon's C.S.D.
Cross section = File ; Fit & File
Charge method = 3 ; charge calculations method 0-5
EPAX Cross Section = 4 ; cross section calculations method 0-4
SR Cross Section = 2 ; EPAX for SR 0-2
Energy Loss = 4 ; energy loss calculation method 0-3
Anglular straggling = 1 ; 0-LISE, 1-ATIMA
StragglingCoef1 = 0.217
StragglingCoef2 = 1.12
Energy straggling = 1 ; 0-LISE, 1-ATIMA
EnergyStragMethod = 0 ; 0-integrate, 1-table
EnergyStragShape = 0 ; 0-Gauss, 1-Landau-Vavilov
EquilThickness = 1 ; 0-Charge, 1-Global
MassMethod = 0 ; 0-DB+calcul, 1 + just calcul
MassDataBase = 0 ; 0-A&W, 1-User ME
Mass formula = 2 ; 0-LDM, 1-Myerer, 2: 1+corrections
UseChargeForEnergy = 2 ; 0-No, 1-Yes, 2-Auto
EnergyValueAuto = 30 ; default value 30 MeV/u
EquilibriumMode = 1 ; 0-Equil, 1-NonEquil
UB_Global = 70 ; default 70 MeV/u
MinZ_Global = 2 ; default Z>=29
ChargeStateOptim = 1 ; 0-No, 1-Yes
ZmQ_AfterReactn = 0 ; default 0 (full stripped)
EPAX_p_Norm = 1
EPAX_p_Un = 1.65
EPAX_p_Up0 = 1.79
EPAX_p_Up1 = 0.00472
EPAX_p_Up2 = -1.3e-5
EPAX_p_H = 1
[fission]
FisAngDistShape = 0 ; 0-isotropic; 1-anisotropic
FisMomCutForAngDist = 2 ; 0-dont use; 1-use just MatrixKinematics; 2-use for all; (default 2)
OddEvenCorrections = 1 ; 0-dont use; 1-use
PostScissionEvaporation = 1 ; 0-dont use; 1-use
DeexcitFunctionPoints = 0 ; 0- average deexcitation energy; 1- 3 points; 2 - manually
FisEXmanually = 20 ; Excitation energy manually
FisCSmanually = 1000 ; Cross section manually
FisTXEmethod = 1 ; 0-from Edissipated, 1 from Q-value
Fis_f = 0.0045 ; default 0.0045
FisEXsigma = 5.5 MeV ; default 5.5
FisCS_Global = 1e-11
FisCS_TKE = 1e-8
FisBeta1 = 0.625 ; deformation of light fragment
FisBeta2 = 0.625 ; deformation of heavy fragment
FisTKE_d = 2 fm ; d-param in Wilkins formula
FisBetaFit = 1 ; 0-manual, 1-fit
N0 = 83 ; default 82
dU0 = -2.65 ; default -2.5
C0 = 0.7 ; default 1.4
cpol0 = 0.65 ; default 0.65
width0 = 0.63 ; default 0.63
N1 = 90 ; default 90
dU1 = -3.8 ; default -5.5
C1 = 0.15 ; default 0.16
cpol1 = 0.55 ; default 0.55
width1 = 0.97 ; default 0.97
[charge_suppression]
FragInd = 1e-3
FragTotal = 1e-5
BeamInd = 1e-20
BeamTotal = 1e-20
[convolution]
Convolution mode = 1 ; 0-Qgg, 1-Surface, 2-E* per Abraded nucleon
SigmaConv = 91.5 MeV/c ; default 90 for Convolution
CoefConv_0 = 3.344
CoefConv_1 = 3
CoefConv_2 = 1
ShiftConv_0 = 0.158
ShiftConv_1 = 0.149
ShiftConv_2 = -1
[evaporation]
NP evaporation = 32 ; Number of points in distribution
NPevapFis = 8 ; Number of points in distribution
EvapMethod = 2
StateDensityMode = 2 ; 0, 1+pairing, 2+shell
EvapUnstableNuclei = 1 ; 0 - only stable,1 +unstable
Tunnelling = 1 ; 1-Yes, 0-No
AvoidUnboundCS = 1 ; 1-Yes, 0-No
ProtectedChannels = 1 ; 1-Yes, 0-No
R_Evaporation = 5.7 fm ; correction for the effective Coulomb barrier
Mode_Apf_manual = 0 ; 1-manual, 0-auto
Energy_in_T = 2 ; default 2
EvaporationVelocity = 0 ; 0 - quality, 1 -fast
DeltaOddEvenEvap = 12
DeltaOddEvenFission = 14
BreakupTemperature250 = 4.7
BreakupTemperature150 = 5.9
BreakupTemperature050 = 8
BreakupDiffuseness = 0.05
DissipationKramers = 0 ; 0 - no, 1 - use
DissipationStepFunction = 1 ; 0 - no, 1 - use
DissipationBeta = 1 ; default 2.0
mode_1n = 1 ; 1-Yes, 0-No
mode_2n = 0 ; 1-Yes, 0-No
mode_1p = 1 ; 1-Yes, 0-No
mode_2p = 0 ; 1-Yes, 0-No
mode_a = 1 ; 1-Yes, 0-No
mode_d = 0 ; 1-Yes, 0-No
mode_t = 0 ; 1-Yes, 0-No
mode_3he = 0 ; 1-Yes, 0-No
mode_fis = 1 ; 1-Yes, 0-No
mode_brk_up = 1 ; 1-Yes, 0-No
mode_gamma = 0 ; 1-Yes, 0-No
[fission_barrier]
FissionBarrierFactor = 1
FissionBarrierMode = 1 ; #0-4
OddEvenCorrections = 1 ; 1-Yes, 0-No
ShellCorrections = 1 ; 1-Yes, 0-No
FB_InOutMax = 2 ; #0-2 - in/out/max
ModeForUser = 1 ; #0-2
NdeltaOddEven = 2.5
ZdeltaOddEven = 9
[excitation_energy]
GeomAA_Correction = 1 ; 0 - don't use,1 - use -default
Thermalization = 0 ; 1-Yes, 0-No
ThermaTimeCoef = 3e+0 ; 2.1e-22 MeV *s/e(t)
Friction = 0 ; 0 - off,1 - on
Ev_A_SigmaCoef = 9.6
G_FrictionCoef1 = 6.5
G_FrictionCoef2 = 0.5
G_FactorCoef1 = 1.5
G_FactorCoef2 = 2.5
DepthHole = 40
EnergyCoef_CB0 = 0
EnergyCoef_CB1 = 13.3
EnergyCoef_CB2 = 0
SigmaCoef_CB0 = 0
SigmaCoef_CB1 = 9.6
SigmaCoef_CB2 = 0
D_MeanTemp = 13
AA_factor = 1
ApplyLimitTemp = 0 ; 1-Yes, 0-No
[evapauto]
tun_a0 = -0.61392
tun_a1 = 0.44559
tun_a2 = 0.12008
A_Bound = 300 ; mass
A_Pairing = 70 ; mass
[plot]
Start target = RF ; Detector & RF
Start of TOF = T1
Stop of TOF = T1
dE-detector-1st = M2
dE-detector-2nd = M2
TKE-detector = M2
PlotBrho = D4
PlotWedge = S4
X-detector = M4
Y-detector = M4
Tilting = M1
Stopper = M2
RO_Wedge = n
ConditionBlock = A10
Plot threshold = 1e-10 pps ; minimal value for plot scale
Shift of TOF for RF = 0 ns ; for dE-TOF plot with RF
Fraction of RF trigger = 2
UseCondition = 0
TKE_calibration = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension
[cs_file]
UserDiffCS = 0 ; Number of User Diff CS saved in this file
AppendOverwrite = 1
AttachedInside = 1
ShowCSinPlot = 1
Chi2 = 1
CSfilename = //WinFileSvG/FRS$Root/Weick/Eigene Dateien/experiments/E100-205Tl/206Pb+9Be-frag.cs
[sec_reactions]
NP sec.reactions = 16 ; Number of points in distribution
Secondary reactions = 0 ; 0/1 - use secondary reactions in calculations
fiss_FilterUse0 = 1
fiss_FilterUse1 = 1
fiss_FilterUse2 = 1
fiss_ellipse = 5
fiss_NdeltaTop = 0
fiss_ZdeltaTop = 0
fiss_NdeltaBot = 25
fiss_ZdeltaBot = 20
frag_FilterUse0 = 3
frag_FilterUse1 = 3
frag_FilterUse2 = 3
frag_ellipse = 4
frag_NdeltaTop = 5
frag_ZdeltaTop = 5
frag_NdeltaBot = 6
frag_ZdeltaBot = 6
[abrasion_fission]
HML_show = 7 ; HML-bits
BoundaryLow = 40 MeV
BoundaryHigh = 180 MeV
Velocity = 1 ; Calculat fissile nuclei speed
LowEx_nucleus = 39Ar18+ ; Mass ElementName Charge+ Beam
L_CS_Ex = 3.000e+02 25.00 5.00 ; mb, MeV, Mev
MidEx_nucleus = 34S 16+ ; Mass ElementName Charge+ Beam
M_CS_Ex = 1.000e+03 100.00 5.00 ; mb, MeV, Mev
HighEx_nucleus = 28Si14+ ; Mass ElementName Charge+ Beam
H_CS_Ex = 8.000e+02 250.00 5.00 ; mb, MeV, Mev
[gamma_detection]
coef0 = 1.39905
coef1 = 0.69523
coef2 = -5.92199
coef3 = 1
coef4 = 0.269
area = 38.81 cm^2
distance = 20.4 cm
geom_eff = 1 %
mode = 2 ; 0-area,1-dist,2-geom
threshold = 100 keV
start = 0 mks
gate = 10 mks
Energy_cell = 1330 keV
Refer_GperF = 0.01 g/f
UseGeom = 0 ; yes-1, no-0
UseEnergy = 1 ; yes-1, no-0
[sec_target]
NP2 = 16 ; Dimension
tertiary = 0 ; yes-1, no-0
method = 0 ; 0-distribution, 1-gauss, 2-d4
threshold = 1e-10
Pr_z0 = 1
Pr_z1 = 100
Pr_n0 = 0
Pr_n1 = 200
Dr_z0 = 1
Dr_z1 = 82
Dr_n0 = 0
Dr_n1 = 124
[cross sections]
[previous]
Lowerst = 76Os76+ ; Mass ElementName Charge+ Beam
Highest = 209Bi83+ ; Mass ElementName Charge+ Beam
[finger]
Diffuseness = 0.01 ; default 0.01
Suppression = 1e+12 ; default 1e12
[MC_options]
dXsel = 0
dYsel = 10
dAZQ_X = 1
dAZQ_Y = 5
dVEL_X = 1
dVEL_Y = 0
dIso_mode = 1
strag_ang = 1
strag_ene = 1
strag_lat = 0
MCresolution = 1
XYresolution = 1
defect = 1
charge = 1
loss_reaction = 1
reaction_ang = 0
reaction_mom = 0
HighOrder = 1
CS_use = 1
envelope_show = 0
use_bore = 0
use_ang_acc = 1
XY_orientation = 0
outside_cikl = 1
MC_outside_sigma = 1
dP_option = 0
Radialsign = 0
AZQ_Xsigma = 0.1
AZQ_Ysigma = 0.1
G1_gate = 0 0 -100.0000 100.0000
G2_gate = 0 0 -100.0000 100.0000
G3_gate = 0 0 -100.0000 100.0000
G4_gate = 0 0 -100.0000 100.0000
G1_component = 0 0,R1,R1,R1 ; mode,RF_TOF,BP,TOFstart,TOFstop
G2_component = 0 0,R1,R1,R1
G3_component = 0 0,R1,R1,R1
G4_component = 0 0,R1,R1,R1
[Levmar_fit]
Niter = 1000 ; # iterations
UseBounds = 1 ; yes-1, no-0
Example = 4 ; 0-15
opt0 = 1e-3
opt1 = 1e-15
opt2 = 1e-15
opt3 = 1e-20
opt4 = 1e-6
{============================= BLOCK D1 - Dipole ======================================}
[D1_General]
Name = D1,1 ; Name of Block, Constant name 1/0
Available = 1 ; Use 1/0
Length = 18.169300 m ; Length block for optical blocks
SE_method = 0 ; 0: S-block, 1: E-block
SecondOrder = 0 ; Exist - 1, Non - 0
ThirdOrder = 0 ; Number of lines
COSY file = NULL
CalculateAuto = 1 ; 0/1/2 nothing, keep_matrix, keep_field
RemotePermission = 0 ; 0/1 - no/yes
Before_Quad = 2 ; number of quadrupoles before optic device
After_Quad = 2 ; number of quadrupoles after optic device
QB_DontDraw = 0
QA_DontDraw = 0
ZmQ = 0 ; Z - Q = charge state settings
Calibration file = GSI\FRS_D1.cal
[D1_slits]
SlitsShape = 0 ; 0-slits, 1-ellipse
ApertureShape = 1 ; 0-slits, 1-ellipse
X_action = 0,0,0 ; Use 1/0, Show 1/0, UseApp 1/0
X_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Left,L-limit,Right,R-limit
Y_action = 0,0,0 ; Use 1/0, Show 1/0, UseApp 1/0
Y_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Bottom,B-limit,Top,T-limit
[D1_optics]
row1 = -5.08760e-01,-1.34100e-01,+0.00000e+00,+0.00000e+00,+0.00000e+00,+2.06191e+01
row2 = -9.30000e-02,-1.99000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.09030e+00
row3 = +0.00000e+00,+0.00000e+00,-3.65088e+00,+5.18780e+00,+0.00000e+00,+1.00000e-05
row4 = +0.00000e+00,+0.00000e+00,-3.18150e-01,+1.78180e-01,+0.00000e+00,+0.00000e+00
row5 = +2.28800e-01,+4.23400e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,-4.99000e-01
row6 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00
[D1_AngAcceptance]
X-Use = 1 ; Use 1/0
X-Value = 12 mrad ; acceptance
Y-Use = 1 ; Use 1/0
Y-Value = 15 mrad ; acceptance
Shape = 1 ; 0 - rectangle, 1- ellipse
[D1_DipoleSettings]
Brho = 7.34710 Tm ; magnetic rigidity
Angle = 30 degrees
Radius = 11.25 m
[D1_DipoleTransport]
Code4_N = 0 ; default 0. code 4. n
Code4_B = 0 ; default 0. code 4. b
Calculate2Order = 1 ; Use 1/0
GapVert = 0 cm ; code 16.5
K1 = 0.7 ; code 16.7
K2 = 4.4 ; code 16.8
EntranceCurvature = 0 1/m ; 1/R1 - code 16.12
ExitCurvature = 0 1/m ; 1/R2 - code 16.13
Beta1angle = 0 deg ; code 2.0 - entrance
Beta2angle = 0 deg ; code 2.0 - exit
UseFringeField = 1 ; Entrance Use 1/0
UseExitFringeF = 1 ; Exit Use 1/0
{============================= BLOCK S1 - Drift ======================================}
[S1_General]
Name = S1_slits,1 ; Name of Block, Constant name 1/0
Available = 1 ; Use 1/0
Length = 0.000000 m ; Length block for optical blocks
SE_method = 0 ; 0: S-block, 1: E-block
SecondOrder = 0 ; Exist - 1, Non - 0
ThirdOrder = 0 ; Number of lines
COSY file = NULL
CalculateAuto = 1 ; 0/1/2 nothing, keep_matrix, keep_field
RemotePermission = 1 ; 0/1 - no/yes
[S1_slits]
SlitsShape = 0 ; 0-slits, 1-ellipse
ApertureShape = 1 ; 0-slits, 1-ellipse
X_action = 1,1,0 ; Use 1/0, Show 1/0, UseApp 1/0
X_size = 1,-33.00,-100.0,33.00,100.0 ; joint,Left,L-limit,Right,R-limit
Y_action = 0,0,0 ; Use 1/0, Show 1/0, UseApp 1/0
Y_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Bottom,B-limit,Top,T-limit
[S1_optics]
row1 = +1.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e-05
row2 = +0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00
row3 = +0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e-05
row4 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00
row5 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00
row6 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00
[S1_AngAcceptance]
X-Use = 0 ; Use 1/0
X-Value = 1000 mrad ; acceptance
Y-Use = 0 ; Use 1/0
Y-Value = 1000 mrad ; acceptance
Shape = 1 ; 0 - rectangle, 1- ellipse
[S1_DriftSettings]
Mode = 0 ; 4-finger, E-Quad 3, M-Quad 2, Stand 1, Beamline 0
ShowLength = 0 ; I 3 / B 2 / Brho 1 / Length 0
Length_effective = 0 m
Leff_coef = 0.7 1
Leff_mode = 0 ; file-3, calc-2, manually-1, keep-0
MagneticField = 5 KG
Radius = 5 cm ; half-aperture
Include 2nd order = 0 ; 1 - Yes / 0 - No
CorrespondBrho = 0 Tm ; refBrho
CorrespondErho = 0e+0 J/c ; for e-quad refErho
Voltage = 0 kV ; for e-quad
sextMagnField = 0 KG
sextRad = 5 cm ; half-aperture
Calibration file = NULL
{============================= BLOCK M1 - Material ======================================}
[M1_General]
Name = MW11,1 ; Name of Block, Constant name 1/0
Available = 0 ; Use 1/0
Length = 0.000000 m ; Length block for optical blocks
[M1_Compound]
contents1 = 0,26,1,55.847 ; Nomer,Z,Atoms,Mass
thickness = 1,256,7.866,0,0,0 ; State,Thickness,density,angle,SolidGas,..
Defect = 0,0.5 ; [0] choice - % or micron at 0 degree, [1]=value;
Use for Q-states = 1 ; Use 1/0
ResolutionE = 0,1 ; [0] choice - % or MeV, [1]=value;
Resolution2 = 0.5,0.5,0.5 ns,mm,mm ; Time&X&Y space
[M1_BlockCalibration]
TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension
dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension
X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension
Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension
[M1_ProdTarget]
ProdTarget = 0 ; 1 - Yes / 0 - No
{============================= BLOCK D2 - Dipole ======================================}
[D2_General]
Name = D2,1 ; Name of Block, Constant name 1/0
Available = 1 ; Use 1/0
Length = 18.110100 m ; Length block for optical blocks
SE_method = 0 ; 0: S-block, 1: E-block
SecondOrder = 0 ; Exist - 1, Non - 0
ThirdOrder = 0 ; Number of lines
COSY file = NULL
CalculateAuto = 1 ; 0/1/2 nothing, keep_matrix, keep_field
RemotePermission = 0 ; 0/1 - no/yes
Before_Quad = 2 ; number of quadrupoles before optic device
After_Quad = 2 ; number of quadrupoles after optic device
QB_DontDraw = 0
QA_DontDraw = 0
ZmQ = 0 ; Z - Q = charge state settings
Calibration file = GSI\FRS_D2.cal
[D2_slits]
SlitsShape = 0 ; 0-slits, 1-ellipse
ApertureShape = 1 ; 0-slits, 1-ellipse
X_action = 1,1,0 ; Use 1/0, Show 1/0, UseApp 1/0
X_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Left,L-limit,Right,R-limit
Y_action = 1,0,0 ; Use 1/0, Show 1/0, UseApp 1/0
Y_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Bottom,B-limit,Top,T-limit
[D2_optics]
row1 = -1.59176e+00,+1.07240e-01,+0.00000e+00,+0.00000e+00,+0.00000e+00,-3.54820e+01
row2 = -2.01100e-02,-6.26880e-01,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.09800e+00
row3 = +0.00000e+00,+0.00000e+00,-2.74720e-01,+7.34300e+00,+0.00000e+00,+1.00000e-05
row4 = +0.00000e+00,+0.00000e+00,-4.57700e-02,-2.41677e+00,+0.00000e+00,-1.33200e-06
row5 = -3.26120e-01,-2.34770e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,+1.03370e+01
row6 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00
[D2_AngAcceptance]
X-Use = 1 ; Use 1/0
X-Value = 22 mrad ; acceptance
Y-Use = 1 ; Use 1/0
Y-Value = 3.5 mrad ; acceptance
Shape = 1 ; 0 - rectangle, 1- ellipse
[D2_DipoleSettings]
Brho = 7.34710 Tm ; magnetic rigidity
Angle = -30 degrees
Radius = 11.25 m
[D2_DipoleTransport]
Code4_N = 0 ; default 0. code 4. n
Code4_B = 0 ; default 0. code 4. b
Calculate2Order = 1 ; Use 1/0
GapVert = 0 cm ; code 16.5
K1 = 0.7 ; code 16.7
K2 = 4.4 ; code 16.8
EntranceCurvature = 0 1/m ; 1/R1 - code 16.12
ExitCurvature = 0 1/m ; 1/R2 - code 16.13
Beta1angle = 0 deg ; code 2.0 - entrance
Beta2angle = 0 deg ; code 2.0 - exit
UseFringeField = 1 ; Entrance Use 1/0
UseExitFringeF = 1 ; Exit Use 1/0
{============================= BLOCK A1 - FaradayCup ======================================}
[A1_General]
Name = FaradayCup 1,0 ; Name of Block, Constant name 1/0
Available = 0 ; Use 1/0
Length = 0.000000 m ; Length block for optical blocks
[A1_Compound]
contents1 = 0,74,1,183.85 ; Nomer,Z,Atoms,Mass
thickness = 0,10000000000,19.35,0,0,0 ; State,Thickness,density,angle,SolidGas,..
Defect = 1,0 ; [0] choice - % or micron at 0 degree, [1]=value;
Use for Q-states = 1 ; Use 1/0
ResolutionE = 0,0.5 ; [0] choice - % or MeV, [1]=value;
Resolution2 = 0.1,0.3,0.3 ns,mm,mm ; Time&X&Y space
[A1_BlockCalibration]
TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension
dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension
X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension
Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension
{============================= BLOCK M2 - Material ======================================}
[M2_General]
Name = TPC22,1 ; Name of Block, Constant name 1/0
Available = 0 ; Use 1/0
Length = 0.000000 m ; Length block for optical blocks
[M2_Compound]
contents1 = 0,22,1,47.9 ; Nomer,Z,Atoms,Mass
thickness = 1,110,4.519,0,0,0 ; State,Thickness,density,angle,SolidGas,..
Defect = 0,0.5 ; [0] choice - % or micron at 0 degree, [1]=value;
Use for Q-states = 1 ; Use 1/0
ResolutionE = 0,1 ; [0] choice - % or MeV, [1]=value;
Resolution2 = 0.5,0.5,0.5 ns,mm,mm ; Time&X&Y space
[M2_BlockCalibration]
TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension
dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension
X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension
Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension
[M2_ProdTarget]
ProdTarget = 0 ; 1 - Yes / 0 - No
{============================= BLOCK W1 - Wedge ======================================}
[W1_General]
Name = S2_wedge,1 ; Name of Block, Constant name 1/0
Available = 1 ; Use 1/0
Length = 0.000000 m ; Length block for optical blocks
[W1_Compound]
contents1 = 0,1,10,1.008 ; Nomer,Z,Atoms,Mass
contents2 = 1,6,9,12.011 ; Nomer,Z,Atoms,Mass
thickness = 0,2000,1.032,0,0,0 ; State,Thickness,density,angle,SolidGas,..
Defect = 1,0 ; [0] choice - % or micron at 0 degree, [1]=value;
Use for Q-states = 1 ; Use 1/0
[W1_ProdTarget]
ProdTarget = 0 ; 1 - Yes / 0 - No
[W1_WedgeSettings]
ProfileMode = 0 ; 0-Wedge,1-Homo,2-Curved,3-Custom
PhysProfileDesirable = 0 ; 0-Achrom,1-Monoch,2-user-defined
Angle = -0.82181 mrad ; wedge slope for the mode (0-Wedge)
Direction = 0 ; x=0, y=1
CalculateForBlock = D5
DirectReverse = 0 ; 0-direct, 1-LISE reverse, 2-COSY
ProfileFileName = NULL
ExternalInternal = 1 ; external=0 / internal=1
ReadInternal = 0 ; 1 - Yes / 0 - No
CustomFileName = NULL
CustExternalInter = 1 ; external=0 / internal=1
CustReadInter = 0 ; 1 - Yes / 0 - No
Porder = 2 ; polynom order 1-4
coef0 = 0e+0 mm^(+1)
coef1 = 0e+0 mm^(+0)
coef2 = 0e+0 mm^(-1)
coef3 = 0e+0 mm^(-2)
coef4 = 0e+0 mm^(-3)
MatrixElement66 = 1 ; d/d matrix, default 1
{============================= BLOCK S2 - Drift ======================================}
[S2_General]
Name = S2_slits,1 ; Name of Block, Constant name 1/0
Available = 1 ; Use 1/0
Length = 0.000000 m ; Length block for optical blocks
SE_method = 0 ; 0: S-block, 1: E-block
SecondOrder = 0 ; Exist - 1, Non - 0
ThirdOrder = 0 ; Number of lines
COSY file = NULL
CalculateAuto = 1 ; 0/1/2 nothing, keep_matrix, keep_field
RemotePermission = 1 ; 0/1 - no/yes
[S2_slits]
SlitsShape = 0 ; 0-slits, 1-ellipse
ApertureShape = 1 ; 0-slits, 1-ellipse
X_action = 1,1,0 ; Use 1/0, Show 1/0, UseApp 1/0
X_size = 1,-40.00,-100.0,40.00,100.0 ; joint,Left,L-limit,Right,R-limit
Y_action = 1,1,0 ; Use 1/0, Show 1/0, UseApp 1/0
Y_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Bottom,B-limit,Top,T-limit
[S2_optics]
row1 = +1.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e-05
row2 = +0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00
row3 = +0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e-05
row4 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00
row5 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00
row6 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00
[S2_AngAcceptance]
X-Use = 0 ; Use 1/0
X-Value = 1000 mrad ; acceptance
Y-Use = 0 ; Use 1/0
Y-Value = 1000 mrad ; acceptance
Shape = 1 ; 0 - rectangle, 1- ellipse
[S2_DriftSettings]
Mode = 0 ; 4-finger, E-Quad 3, M-Quad 2, Stand 1, Beamline 0
ShowLength = 0 ; I 3 / B 2 / Brho 1 / Length 0
Length_effective = 0 m
Leff_coef = 0.7 1
Leff_mode = 0 ; file-3, calc-2, manually-1, keep-0
MagneticField = 5 KG
Radius = 5 cm ; half-aperture
Include 2nd order = 0 ; 1 - Yes / 0 - No
CorrespondBrho = 0 Tm ; refBrho
CorrespondErho = 0e+0 J/c ; for e-quad refErho
Voltage = 0 kV ; for e-quad
sextMagnField = 0 KG
sextRad = 5 cm ; half-aperture
Calibration file = NULL
{============================= BLOCK D3 - Dipole ======================================}
[D3_General]
Name = D3,1 ; Name of Block, Constant name 1/0
Available = 1 ; Use 1/0
Length = 18.340000 m ; Length block for optical blocks
SE_method = 0 ; 0: S-block, 1: E-block
SecondOrder = 0 ; Exist - 1, Non - 0
ThirdOrder = 0 ; Number of lines
COSY file = NULL
CalculateAuto = 1 ; 0/1/2 nothing, keep_matrix, keep_field
RemotePermission = 0 ; 0/1 - no/yes
Before_Quad = 2 ; number of quadrupoles before optic device
After_Quad = 2 ; number of quadrupoles after optic device
QB_DontDraw = 0
QA_DontDraw = 0
ZmQ = 0 ; Z - Q = charge state settings
Calibration file = GSI\FRS_D3.cal
[D3_slits]
SlitsShape = 0 ; 0-slits, 1-ellipse
ApertureShape = 1 ; 0-slits, 1-ellipse
X_action = 0,0,0 ; Use 1/0, Show 1/0, UseApp 1/0
X_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Left,L-limit,Right,R-limit
Y_action = 0,0,0 ; Use 1/0, Show 1/0, UseApp 1/0
Y_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Bottom,B-limit,Top,T-limit
[D3_optics]
row1 = -9.34420e-01,+3.85530e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,-3.59095e+01
row2 = -2.06520e-01,-2.18120e-01,+0.00000e+00,+0.00000e+00,+0.00000e+00,-7.65410e+00
row3 = +0.00000e+00,+0.00000e+00,-2.43201e+00,+3.72444e+00,+0.00000e+00,+4.04400e-05
row4 = +0.00000e+00,+0.00000e+00,+1.74830e-01,-6.78920e-01,+0.00000e+00,-1.36100e-06
row5 = +1.67430e-01,-3.38040e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,+1.02280e+01
row6 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00
[D3_AngAcceptance]
X-Use = 1 ; Use 1/0
X-Value = 16 mrad ; acceptance
Y-Use = 1 ; Use 1/0
Y-Value = 14 mrad ; acceptance
Shape = 1 ; 0 - rectangle, 1- ellipse
[D3_DipoleSettings]
Brho = 7.19414 Tm ; magnetic rigidity
Angle = -30 degrees
Radius = 11.25 m
[D3_DipoleTransport]
Code4_N = 0 ; default 0. code 4. n
Code4_B = 0 ; default 0. code 4. b
Calculate2Order = 1 ; Use 1/0
GapVert = 0 cm ; code 16.5
K1 = 0.7 ; code 16.7
K2 = 4.4 ; code 16.8
EntranceCurvature = 0 1/m ; 1/R1 - code 16.12
ExitCurvature = 0 1/m ; 1/R2 - code 16.13
Beta1angle = 0 deg ; code 2.0 - entrance
Beta2angle = 0 deg ; code 2.0 - exit
UseFringeField = 1 ; Entrance Use 1/0
UseExitFringeF = 1 ; Exit Use 1/0
{============================= BLOCK M3 - Material ======================================}
[M3_General]
Name = CG31,1 ; Name of Block, Constant name 1/0
Available = 0 ; Use 1/0
Length = 0.000000 m ; Length block for optical blocks
[M3_Compound]
contents1 = 0,26,1,55.847 ; Nomer,Z,Atoms,Mass
thickness = 1,256,7.866,0,0,0 ; State,Thickness,density,angle,SolidGas,..
Defect = 0,0.5 ; [0] choice - % or micron at 0 degree, [1]=value;
MixMolarMass = 400.00
Use for Q-states = 1 ; Use 1/0
ResolutionE = 0,1 ; [0] choice - % or MeV, [1]=value;
Resolution2 = 0.5,0.5,0.5 ns,mm,mm ; Time&X&Y space
[M3_BlockCalibration]
TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension
dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension
X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension
Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension
[M3_ProdTarget]
ProdTarget = 0 ; 1 - Yes / 0 - No
{============================= BLOCK S3 - Drift ======================================}
[S3_General]
Name = S3-slit,1 ; Name of Block, Constant name 1/0
Available = 1 ; Use 1/0
Length = 0.000000 m ; Length block for optical blocks
SE_method = 0 ; 0: S-block, 1: E-block
SecondOrder = 0 ; Exist - 1, Non - 0
ThirdOrder = 0 ; Number of lines
COSY file = NULL
CalculateAuto = 1 ; 0/1/2 nothing, keep_matrix, keep_field
RemotePermission = 1 ; 0/1 - no/yes
[S3_slits]
SlitsShape = 0 ; 0-slits, 1-ellipse
ApertureShape = 1 ; 0-slits, 1-ellipse
X_action = 1,1,0 ; Use 1/0, Show 1/0, UseApp 1/0
X_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Left,L-limit,Right,R-limit
Y_action = 0,0,0 ; Use 1/0, Show 1/0, UseApp 1/0
Y_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Bottom,B-limit,Top,T-limit
[S3_optics]
row1 = +1.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e-05
row2 = +0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00
row3 = +0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e-05
row4 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00
row5 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00
row6 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00
[S3_AngAcceptance]
X-Use = 0 ; Use 1/0
X-Value = 1000 mrad ; acceptance
Y-Use = 0 ; Use 1/0
Y-Value = 1000 mrad ; acceptance
Shape = 1 ; 0 - rectangle, 1- ellipse
[S3_DriftSettings]
Mode = 0 ; 4-finger, E-Quad 3, M-Quad 2, Stand 1, Beamline 0
ShowLength = 0 ; I 3 / B 2 / Brho 1 / Length 0
Length_effective = 0 m
Leff_coef = 0.7 1
Leff_mode = 0 ; file-3, calc-2, manually-1, keep-0
MagneticField = 5 KG
Radius = 5 cm ; half-aperture
Include 2nd order = 0 ; 1 - Yes / 0 - No
CorrespondBrho = 0 Tm ; refBrho
CorrespondErho = 0e+0 J/c ; for e-quad refErho
Voltage = 0 kV ; for e-quad
sextMagnField = 0 KG
sextRad = 5 cm ; half-aperture
Calibration file = NULL
{============================= BLOCK D4 - Dipole ======================================}
[D4_General]
Name = D5,1 ; Name of Block, Constant name 1/0
Available = 1 ; Use 1/0
Length = 35.000000 m ; Length block for optical blocks
SE_method = 0 ; 0: S-block, 1: E-block
SecondOrder = 0 ; Exist - 1, Non - 0
ThirdOrder = 0 ; Number of lines
COSY file = NULL
CalculateAuto = 1 ; 0/1/2 nothing, keep_matrix, keep_field
RemotePermission = 0 ; 0/1 - no/yes
Before_Quad = 4 ; number of quadrupoles before optic device
After_Quad = 2 ; number of quadrupoles after optic device
QB_DontDraw = 0
QA_DontDraw = 0
ZmQ = 0 ; Z - Q = charge state settings
Calibration file = GSI\FRS_D5.cal
[D4_slits]
SlitsShape = 0 ; 0-slits, 1-ellipse
ApertureShape = 1 ; 0-slits, 1-ellipse
X_action = 0,0,0 ; Use 1/0, Show 1/0, UseApp 1/0
X_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Left,L-limit,Right,R-limit
Y_action = 0,0,0 ; Use 1/0, Show 1/0, UseApp 1/0
Y_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Bottom,B-limit,Top,T-limit
[D4_optics]
row1 = -3.78580e-01,-6.69296e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+5.30485e+01
row2 = +4.31080e-02,-1.87941e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.10426e+01
row3 = +0.00000e+00,+0.00000e+00,-4.25414e+00,-2.77327e+01,+0.00000e+00,+1.14315e-04
row4 = +0.00000e+00,+0.00000e+00,+7.49758e-01,+4.65260e+00,+0.00000e+00,-2.54651e-05
row5 = +1.69950e-01,+2.11273e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,-5.28323e-01
row6 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00
[D4_AngAcceptance]
X-Use = 1 ; Use 1/0
X-Value = 26 mrad ; acceptance
Y-Use = 1 ; Use 1/0
Y-Value = 3 mrad ; acceptance
Shape = 1 ; 0 - rectangle, 1- ellipse
[D4_DipoleSettings]
Brho = 7.19414 Tm ; magnetic rigidity
Angle = 30 degrees
Radius = 11.25 m
[D4_DipoleTransport]
Code4_N = 0 ; default 0. code 4. n
Code4_B = 0 ; default 0. code 4. b
Calculate2Order = 1 ; Use 1/0
GapVert = 0 cm ; code 16.5
K1 = 0.7 ; code 16.7
K2 = 4.4 ; code 16.8
EntranceCurvature = 0 1/m ; 1/R1 - code 16.12
ExitCurvature = 0 1/m ; 1/R2 - code 16.13
Beta1angle = 0 deg ; code 2.0 - entrance
Beta2angle = 0 deg ; code 2.0 - exit
UseFringeField = 1 ; Entrance Use 1/0
UseExitFringeF = 1 ; Exit Use 1/0
{============================= BLOCK M4 - Material ======================================}
[M4_General]
Name = CG61,1 ; Name of Block, Constant name 1/0
Available = 1 ; Use 1/0
Length = 0.000000 m ; Length block for optical blocks
[M4_Compound]
contents1 = 0,26,1,55.847 ; Nomer,Z,Atoms,Mass
thickness = 1,0,7.866,0,0,0 ; State,Thickness,density,angle,SolidGas,..
Defect = 0,0.5 ; [0] choice - % or micron at 0 degree, [1]=value;
Use for Q-states = 1 ; Use 1/0
ResolutionE = 0,1 ; [0] choice - % or MeV, [1]=value;
Resolution2 = 0.5,0.5,0.5 ns,mm,mm ; Time&X&Y space
[M4_BlockCalibration]
TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension
dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension
X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension
Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension
[M4_ProdTarget]
ProdTarget = 0 ; 1 - Yes / 0 - No
{============================= BLOCK A2 - FaradayCup ======================================}
[A2_General]
Name = FaradayCup 2,0 ; Name of Block, Constant name 1/0
Available = 0 ; Use 1/0
Length = 0.000000 m ; Length block for optical blocks
[A2_Compound]
contents1 = 0,74,1,183.85 ; Nomer,Z,Atoms,Mass
thickness = 0,10000000000,19.35,0,0,0 ; State,Thickness,density,angle,SolidGas,..
Defect = 1,0 ; [0] choice - % or micron at 0 degree, [1]=value;
MixMolarMass = 0.56
Use for Q-states = 1 ; Use 1/0
ResolutionE = 0,0.5 ; [0] choice - % or MeV, [1]=value;
Resolution2 = 0.1,0.3,0.3 ns,mm,mm ; Time&X&Y space
[A2_BlockCalibration]
TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension
dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension
X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension
Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension
{============================= BLOCK S4 - Drift ======================================}
[S4_General]
Name = ESR-slit,1 ; Name of Block, Constant name 1/0
Available = 1 ; Use 1/0
Length = 0.000000 m ; Length block for optical blocks
SE_method = 0 ; 0: S-block, 1: E-block
SecondOrder = 0 ; Exist - 1, Non - 0
ThirdOrder = 0 ; Number of lines
COSY file = NULL
CalculateAuto = 1 ; 0/1/2 nothing, keep_matrix, keep_field
RemotePermission = 1 ; 0/1 - no/yes
[S4_slits]
SlitsShape = 0 ; 0-slits, 1-ellipse
ApertureShape = 1 ; 0-slits, 1-ellipse
X_action = 1,1,0 ; Use 1/0, Show 1/0, UseApp 1/0
X_size = 1,-1.50,-100.0,1.50,100.0 ; joint,Left,L-limit,Right,R-limit
Y_action = 1,1,0 ; Use 1/0, Show 1/0, UseApp 1/0
Y_size = 1,-2.00,-100.0,2.00,100.0 ; joint,Bottom,B-limit,Top,T-limit
[S4_optics]
row1 = +1.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e-10
row2 = +0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00
row3 = +0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e-10
row4 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00
row5 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00
row6 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00
[S4_AngAcceptance]
X-Use = 1 ; Use 1/0
X-Value = 5 mrad ; acceptance
Y-Use = 1 ; Use 1/0
Y-Value = 3 mrad ; acceptance
Shape = 1 ; 0 - rectangle, 1- ellipse
[S4_DriftSettings]
Mode = 0 ; 4-finger, E-Quad 3, M-Quad 2, Stand 1, Beamline 0
ShowLength = 0 ; I 3 / B 2 / Brho 1 / Length 0
Length_effective = 0 m
Leff_coef = 0.7 1
Leff_mode = 0 ; file-3, calc-2, manually-1, keep-0
MagneticField = 5 KG
Radius = 5 cm ; half-aperture
Include 2nd order = 0 ; 1 - Yes / 0 - No
CorrespondBrho = 0 Tm ; refBrho
CorrespondErho = 0e+0 J/c ; for e-quad refErho
Voltage = 0 kV ; for e-quad
sextMagnField = 0 KG
sextRad = 5 cm ; half-aperture
Calibration file = NULL
{============================= BLOCK D5 - Dipole ======================================}
[D5_General]
Name = ESR-Brho-slit,1 ; Name of Block, Constant name 1/0
Available = 1 ; Use 1/0
Length = 80.000000 m ; Length block for optical blocks
SE_method = 0 ; 0: S-block, 1: E-block
SecondOrder = 0 ; Exist - 1, Non - 0
ThirdOrder = 0 ; Number of lines
COSY file = NULL
CalculateAuto = 1 ; 0/1/2 nothing, keep_matrix, keep_field
RemotePermission = 0 ; 0/1 - no/yes
Before_Quad = 0 ; number of quadrupoles before optic device
After_Quad = 0 ; number of quadrupoles after optic device
QB_DontDraw = 0
QA_DontDraw = 0
ZmQ = 0 ; Z - Q = charge state settings
Calibration file = NULL
[D5_slits]
SlitsShape = 0 ; 0-slits, 1-ellipse
ApertureShape = 1 ; 0-slits, 1-ellipse
X_action = 1,1,0 ; Use 1/0, Show 1/0, UseApp 1/0
X_size = 1,-10.00,-100.0,10.00,100.0 ; joint,Left,L-limit,Right,R-limit
Y_action = 0,0,0 ; Use 1/0, Show 1/0, UseApp 1/0
Y_size = 1,-2.00,-10.0,2.00,10.0 ; joint,Bottom,B-limit,Top,T-limit
[D5_optics]
row1 = +1.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+5.00000e+01
row2 = +0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00
row3 = +0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e-10
row4 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00,+0.00000e+00
row5 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00,+0.00000e+00
row6 = +0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+0.00000e+00,+1.00000e+00
[D5_AngAcceptance]
X-Use = 1 ; Use 1/0
X-Value = 5 mrad ; acceptance
Y-Use = 1 ; Use 1/0
Y-Value = 3 mrad ; acceptance
Shape = 1 ; 0 - rectangle, 1- ellipse
[D5_DipoleSettings]
Brho = 7.19414 Tm ; magnetic rigidity
Angle = 360 degrees
Radius = 10 m
[D5_DipoleTransport]
Code4_N = 0 ; default 0. code 4. n
Code4_B = 0 ; default 0. code 4. b
Calculate2Order = 1 ; Use 1/0
GapVert = 0 cm ; code 16.5
K1 = 0.7 ; code 16.7
K2 = 4.4 ; code 16.8
EntranceCurvature = 0 1/m ; 1/R1 - code 16.12
ExitCurvature = 0 1/m ; 1/R2 - code 16.13
Beta1angle = 0 deg ; code 2.0 - entrance
Beta2angle = 0 deg ; code 2.0 - exit
UseFringeField = 1 ; Entrance Use 1/0
UseExitFringeF = 1 ; Exit Use 1/0
{============================= Calculations ======================================}
[Calculations]
120I 53+ 53+ 53+ 53+ 53+ =1.0508e+04,1.0508e+04,0,1.0508e+04,4.8776e+01,7.1471e+01,4.2764e-04,4.1329e+02,1.6276e+00,6.1322e-01,1,1,1,1,6.5809e-01,9.3181e-01,1,1,1,1,1,1,1,1,1,1,9.6152e-01,1,1,9.6158e-01,1,1,1,1,1,1,9.7967e-01,1,1,9.7969e-01,1,9.0354e-01,1,1,1,1,9.6062e-01,9.4058e-01,1,7.9420e-01,7.9420e-01,1,1,1,1,1,1,1,1,1,1,1,1,1,7.9709e-01,1,1,1,7.9709e-01,1,1,1,1,1,1,1,1,9.7841e-03,9.6169e-02,1.4887e-01,7.8570e-01,8.6981e-01,1.3228e-01,1.3866e-01,1,9.7477e-01,9.7871e-01
118Te 52+ 52+ 52+ 52+ 52+ =1.6777e+05,1.6777e+05,0,1.6777e+05,2.8823e+01,4.2234e+01,1.1554e-02,4.1453e+02,2.2867e+00,6.2013e-01,1,1,1,1,6.5918e-01,9.4076e-01,1,1,1,1,1,1,1,1,1,1,9.5494e-01,1,1,9.5516e-01,1,1,1,1,1,1,9.7846e-01,1,1,9.7850e-01,1,9.1057e-01,1,1,1,1,9.6094e-01,9.4758e-01,1,9.2808e-01,9.2808e-01,1,1,1,1,1,1,1,1,1,1,1,1,1,7.8558e-01,1,1,1,7.8558e-01,1,1,1,1,1,1,1,1,6.3088e-02,6.2951e-01,1.4584e-01,7.9358e-01,8.6591e-01,4.7610e-01,4.9782e-01,1,9.7805e-01,9.7782e-01
116Sb 51+ 51+ 51+ 51+ 51+ =4.1362e+03,4.1362e+03,0,4.1362e+03,1.5501e+01,2.2713e+01,5.2967e-04,4.1577e+02,3.0152e+00,6.2591e-01,1,1,1,1,6.6028e-01,9.4794e-01,1,1,1,1,1,1,1,1,1,1,9.4851e-01,1,1,9.4904e-01,1,9.9812e-01,9.9812e-01,1,1,1,9.7155e-01,9.9480e-01,1,9.7670e-01,1,9.1687e-01,1,1,1,1,9.6127e-01,9.5382e-01,1,6.4886e-01,6.4886e-01,1,1,1,1,1,1,1,1,1,1,1,1,1,7.6984e-01,1,1,1,7.6984e-01,1,1,1,1,1,1,1,1,6.9215e-03,7.2775e-02,1.4310e-01,7.7313e-01,8.5964e-01,2.9023e-01,3.0582e-01,1,9.7197e-01,9.7639e-01
111In 48+ 48+ 48+ 48+ 48+ =3.8932e-04,3.8932e-04,0,3.8932e-04,7.8965e+00,1.1571e+01,9.7865e-11,4.1747e+02,4.4984e+00,2.6232e-02,1,1,1,1,6.6302e-01,3.9565e-02,1,1,1,1,1,1,1,1,1,1,9.3072e-01,1,1,9.3306e-01,9.9749e-01,1.4110e-01,1.4110e-01,1,1,1,3.6088e-01,3.7097e-01,1,9.7297e-01,1,3.5348e-02,1,1,1,1,9.6212e-01,3.6740e-02,1,1.8042e-02,1.8042e-02,1,1,1,1,1,1,1,1,1,1,1,1,1,7.3658e-01,1,1,1,7.3658e-01,1,1,1,1,1,1,1,1,9.4363e-03,1.0885e-01,1.3715e-01,7.4566e-01,8.4771e-01,1.7759e-02,1.8718e-02,1,9.7440e-01,9.7366e-01
|