 Sun Mar 15 17:14:08 2020, Laszlo, Calibration, run036 - Xray90 calib Am241, distance 200!,
|
Detector: 90
Source: Am241
Distance: 200mm
Start time: 17:15:12 15.03.2020
Stop time: 17:32:17 15.03.2020
file name: run036_xxxx.lmd
avrg. rate: 450Hz
dead-time: 5% |
|
Sun Mar 15 15:08:44 2020, Jan, Calibration, run035 - Xray145 calib B133 high rate,
|
measurement with old tennelec specAmps, do not use for efficiency!
Detector: 145
Source: B133 high rate
Distance: 305mm
Start time: 15:10:15 15.03.2020
Stop time: 15:31:16 15.03.2020
file name: run035_xxxx.lmd
avrg. rate: 1kHz
dead-time: 12% |
|
Sun Mar 15 14:41:34 2020, Jan, Calibration, run034 - Xray145 calib B133 high rate -SOURCE MOVED!,
|
measurement with old tennelec specAmps, do not use for efficiency!
The source moved during the calibration, measurement stopped at half time.
Detector: 145
Source: B133 high rate
Distance: 305mm
Start time: 14:54:47 15.03.2020
Stop time: 15:06:53 15.03.2020
file name: run034_xxxx.lmd
avrg. rate: 1kHz
dead-time: 11% |
|
Sun Mar 15 13:52:05 2020, Jan, Calibration, run033 - Xray145 calib Am241,
|
measurement with old tennelec specAmps, do not use for efficiency!
Detector: 145
Source: Am-241
Distance: 305mm
Start time: 14:15;56 15.03.2020
Stop time: 14:40:21 15.03.2020
file name: run033_xxxx.lmd
avrg. rate: 300Hz
dead-time: 4% |
|
Sun Mar 15 13:40:11 2020, Jan, Calibration, run032 - Xray90 calib Ba133,
|
measurement with old tennelec specAmps, do not use for efficiency!
Detector: 90
Source: Ba-133 weak source
Distance: 167.5mm
Start time: 13:39:30 15.03.2020
Stop time: 13:50:55 15.03.2020
file name: run032_xxxx.lmd
avrg. rate: 150Hz
dead-time: 1.5% |
|
Sun Mar 15 13:08:38 2020, Jan, Calibration, run031 - Xray90 calib Ba133 hi-rate,
|
measurement with old tennelec specAmps, do not use for efficiency!
Detector: 90
Source: Ba-133 strong source
Distance: 167.5mm
Start time: 13:28:42 15.03.2020
Stop time:13:38:16 15.03.2020
file name: run031_xxxx.lmd
avrg. rate: 2.7kHz
dead-time: 25% |
|
Sun Mar 15 09:42:40 2020, Jan, Calibration, run030 - Xray90 calib Am241,
|
measurement with old tennelec specAmps, do not use for efficiency!
Detector: 90
Source: Am-241
Distance: 167.5mm
Start time: 13:06:55 15.03.2020
Stop time: 13:24:57 15.03.2020
file name: run030_xxxx.lmd
avrg. rate: 650Hz
dead-time: 7% |
|
Sun May 30 14:38:09 2021, Jan Glorius, Calibration, run0216 - X-calib. 90-ba 35-pb, 2021
|
Efficiency calibration in ESR after experiment
************************************
GEM1800 @ 90deg (xray1)
GEM3000 @ 35deg (xray2)
GLP2000 @ 145deg (xray3)
************************************
Detectors: 90 + 35
Source @ 90deg: 133Ba_lo
Source @ 35deg: 210Pb
Distance: each
Start time: 14:46:46 - 30.05.2021
Stop time: 20:11:08 - 30.05.2021
file name: e127b_run0216.lmd
avrg. rate: 330Hz
dead-time: 3% |
|
Sun May 30 14:48:09 2021, Jan, Sophia, Calibration, run0215 - crap, 2021
|
|
|
Sun May 30 13:23:26 2021, Jan Glorius, Calibration, run0214 - X-calib. 90-ba 145-ba 35-am, 2021
|
Efficiency calibration in ESR after experiment
************************************
GEM1800 @ 90deg (xray1)
GEM3000 @ 35deg (xray2)
GLP2000 @ 145deg (xray3)
************************************
Detectors: 90 + 145 + 35
Source @ 90deg: 133Ba_lo
Source @ 145deg: 133Ba_hi
Source @ 35deg: 241Am_hi
Distance: each
Start time: 13:22:38 - 30.05.2021
Stop time: 14:28:09 - 30.05.2021
file name: e127b_run0214.lmd
avrg. rate: 1150Hz
dead-time: 8% |
|
Sun May 30 11:32:06 2021, Jan Glorius, Calibration, run0213 - X-calib. 90-am 145-pb 35-ba, 2021
|
Efficiency calibration in ESR after experiment
************************************
GEM1800 @ 90deg (xray1)
GEM3000 @ 35deg (xray2)
GLP2000 @ 145deg (xray3)
************************************
Detectors: 90 + 145 + 35
Source @ 90deg: 241Am_hi
Source @ 145deg: 210Pb
Source @ 35deg: 133Ba_hi
Distance: each
Start time: 11:31:47 - 30.05.2021
Stop time: 13:10:14 - 30.05.2021
file name: e127b_run0213.lmd
avrg. rate: 700Hz
dead-time: 6% |
|
Sun May 30 10:24:20 2021, Jan Glorius, Calibration, run0212 - X-calib. 90-pb 145-am, 2021
|
Efficiency calibration in ESR after experiment
************************************
GEM1800 @ 90deg (xray1)
GEM3000 @ 35deg (xray2)
GLP2000 @ 145deg (xray3)
************************************
Detectors: 90 + 145
Source @ 90deg: 210Pb
Source @ 145deg: 241Am_hi
Distance: each
Start time: 10:24:55 - 30.05.2021
Stop time: 11:19:29 - 30.05.2021
file name: e127b_run0212.lmd
avrg. rate: 250Hz
dead-time: 2% |
|
Fri May 28 14:40:03 2021, Jan, Runs, run0175 - BaF calib. 22Na, 2021
|
|
|
Thu May 20 17:31:28 2021, Beatriz, Laszlo, Calibration, run0051, 2021
|
crap |
|
Thu May 20 15:15:54 2021, Beatriz, Laszlo, Calibration, run0050, 2021
|
crap |
|
Tue May 18 11:22:57 2021, Jan Glorius, Calibration, run0049 - calib all Xray det., 2021
|
Efficiency calibration in ESR
************************************
GEM1800 @ 90deg (xray1)
GEM3000 @ 35deg (xray2)
GLP2000 @ 145deg (xray3)
************************************
Detector: all
Source @ 90deg: 210Pb
Source @ 35deg: 133Ba_hi
Source @ 145deg: 241Am_hi
Distance: each
Start time: 11:22:36 - 18.05.2021
Stop time: 13:36:55 - 18.05.2021
file name: e127b_run0049.lmd
avrg. rate: 400Hz
dead-time: 3% |
|
Tue May 18 01:03:59 2021, Jan Glorius, Calibration, run0048 - calib all Xray det., 2021
|
Efficiency calibration in ESR
************************************
GEM1800 @ 90deg (xray1)
GEM3000 @ 35deg (xray2)
GLP2000 @ 145deg (xray3)
************************************
Detector: all
Source @ 90deg: 210Pb
Source @ 35deg: 133Ba_hi
Source @ 145deg: 241Am_hi
Distance: each
Start time: 01:20:23 - 18.05.2021
Stop time: 11:05:30 - 18.05.2021
file name: e127b_run0048.lmd
avrg. rate: 400Hz
dead-time: 3% |
|
Tue May 18 01:21:27 2021, Jan Glorius, Calibration, run0047 - crap, 2021
|
|
|
Sun May 16 11:25:25 2021, Jan Glorius, Calibration, run0046 - Xray E-calib 241Am all dets, 2021
|
Detectors: Xray1 (GEM1800), Xray2 (GLP), Xray3 (GEM3000)
Sources: different Am241 at each detector
Start time: 11:25:04 - 16.05.2021
Stop time: 11:29:45 - 16.05.2021
file name: e127b_run0046.lmd
avrg. rate: 6000Hz
dead-time: 30% |
|
Sat May 15 20:21:59 2021, Jan Glorius, Calibration, run0045 - Si pulser run, 2021
|
Detector: DSSD
Source: CAEN Detector Emulator
Start time: 20:24:14 - 15.05.2021
Stop time: 21:01:34 - 15.05.2021
file name: e127b_run0045.lmd
avrg. rate: 1000Hz
dead-time: 7.5%
Si bias test cycle:
0V > 50V/200uA > 100V/280uA > 150V/370uA > 120V/320uA > 90V/260uA > 60V/210uA > 30V/160uA > 0V
This cycle is run twice i the first 15 minutes and shall be used for calibration of the scaler channels.
Also ESR trafo is running with beam. |