| ID |
Date |
Author |
Category |
Subject |
|
18
|
Thu May 6 21:45:30 2021 |
Helmut | Detectors | beam position on TE5 grids |
The two grids do not work very well, one x position is opposite to the other.
But at least a guidance for the future, this was good injection of 78Kr with a thick Be target. |
|
12
|
Thu May 6 16:45:42 2021 |
Ragan, Rui-Jiu | DAQ | Data taking with NTCAP |
NTCAP is on and data taking has started.
On time: 16:39
SC_2021-05-06_16-39-09
\IQ_2021-05-06_16-39-09
IQ Rate: 20 MS/s
Carrier frequency: 245 MHz
Reference level(dBm):-30
RF attenuation(dB):40
IF attenuation(dB):19.9288
Data file
Samples/records:2^18=262144
Records/File:2^12=4096
SC file:
Entries/file:2^18=262144
Master path:
o:\E143\iq
o:\E143\sc |
|
13
|
Thu May 6 17:02:49 2021 |
Ragan, Rui-Jiu | DAQ | Scaler signals and parameters of NTCAP |
At the moment, we record 7 signals in scaler channels and one Schottky signal (245 MHz resonance cavity) in the NTCAP with the attached information. |
|
15
|
Thu May 6 18:21:42 2021 |
Ragan, Rui-Jiu | DAQ | NTCAP started again |
NTCAP was stopped at 17:34 for the optimisation purpose.
NTCAP started again at 18:20 with the change in Reference Level (dBm): 0
SC_2021-05-06_18-20-05
\IQ_2021-05-06_18-20-05 |
|
20
|
Thu May 6 23:06:18 2021 |
Rui-Jiu Chen | DAQ | Change reference level to -50dBm |
Beam is secondary beam now. The intensity is lower. Change reference level to -50dBm.
Carrier frequency:245MHz
IQ rate(S/s): 20M.
Reference Level: -50 dBm.
Start taking data.
SC_2021-05-06_23_02_46
IQ_2021-05-06_23_02_33 |
|
22
|
Fri May 7 01:44:24 2021 |
Rui-Jiu Chen | DAQ | Change reference level to -40dBm |
Reference Level: -40 dBm.
Start taking data.
SC_2021-05-07_00-06-57
IQ_2021-05-07_00-06-57 |
|
23
|
Fri May 7 01:47:36 2021 |
Ragan, Rui-Jiu | DAQ | Change reference level to -30dBm |
Reference Level: -30 dBm.
Start taking data.
SC_2021-05-07_00-11-24
IQ_2021-05-07_00-11-24 |
|
24
|
Fri May 7 01:49:03 2021 |
Rui-Jiu Chen | DAQ | Comparison of I_Raw/Q_Raw between different reference level |
This is a comparison of I_Raw/Q_Raw between different reference level. The range of NTCAP ADC is only 2^15 bit. So signals (I_Raw and Q_Raw) should
not be outside ADC range. It is clear that there is not point outside the ADC range when using reference level -30dBm. |
|
66
|
Sat May 8 03:05:42 2021 |
Rui-Jiu Chen | DAQ | Change reference level to -60dBm |
Start a new run. The data of new run is in :
SC_2021-05-07_17-33-29
IQ_2021-05-07_17-33-29 |
|
67
|
Sat May 8 03:08:57 2021 |
Rui-Jiu Chen | DAQ | Change reference level to -50dBm |
Start a new run. The data of new run is in :
SC_2021-05-07_17-39-16
IQ_2021-05-07_17-39-16 |
|
78
|
Sat May 8 18:35:25 2021 |
Rui-Jiu Chen | DAQ | Change reference level to -10dBm |
The beam in ESR is 78Kr36+@476 MeV/u.
Start a new run:
SC_2021-05-08_18-25-52
IQ_2021-05-08_18-25-52 |
|
79
|
Sat May 8 19:51:46 2021 |
Ragan, Rui-Jiu | DAQ | Change reference level to -50dBm |
Start a new run. The data of new run is in :
SC_2021-05-08_19-51-35
IQ_2021-05-08_19-51-35 |
|
119
|
Sun May 9 23:59:26 2021 |
Rui-Jiu Chen | DAQ | Start a new run. |
Start a new run. The data of new run is in :
reference level = -50dBm.
SC_2021-05-09_23-43-37
IQ_2021-05-09_23-43-37 |
|
120
|
Mon May 10 00:00:49 2021 |
Ragan, Rui-Jiu | DAQ | Change reference level to -70dBm |
Start a new run. The data of new run is in :
SC_2021-05-09_23-56-42
IQ_2021-05-09_23-56-42 |
|
121
|
Mon May 10 00:08:26 2021 |
Rui-Jiu Chen | DAQ | Change reference level to -60dBm |
Start a new run. The data of new run is in :
SC_2021-05-10_00-08-08
IQ_2021-05-10_00-08-08 |
|
136
|
Mon Jun 28 18:32:49 2021 |
Ruijiu, Shahab | DAQ | trigger signal connected to NTCAP and analyzers |
|
|
139
|
Tue Jun 29 20:40:55 2021 |
Rui-Jiu Chen | DAQ | start NTCAP |
Carrier Frequency:245MHz.
IQ rate 20MSamples/s
Reference level:-90 dBm
SC_2021-06-29_20-38-27
IQ_2021-06-29_20-38-27 |
|
168
|
Thu Jul 1 15:25:42 2021 |
Rui-Jiu Chen | DAQ | template of NTCAP shift |
Please check following two parameters every two hours into make sure the NTCAP is running well:
1. The latest recorded tdms files:
p:\E143\sc\**\**
p:\E143\iq\**\**
2. The rest space on the drive "p:\" : **GByte. |
|
172
|
Thu Jul 1 18:01:52 2021 |
Andrew Nic Shahab | DAQ | Change triggers to 10% |
Change the triggers to 10%. Last files with 50/50:
410MhZ 2021-.07.01.17.56.12.936
245MhZ 2021.07.01.18.02.16.938 |
|
178
|
Thu Jul 1 19:34:11 2021 |
Shahab | DAQ | increase factor 4 in power for 410 |
increase factor 4 in power for 410
before:
410MHz-2021.07.01.18.48.07.516.tiq.png
after:
410MHz-2021.07.01.19.23.49.099.tiq.png |