ID |
Date |
Author |
Category |
Subject |
Text |
 |
39
|
Thu Feb 27 16:30:57 2025 |
Konstantin und Rodolfo | DAQ | HF Signal | We have exchanged the HF-Signal in the DAQ
Electronic: from Dummy-HF to the real HF
from accelerator. |
|
41
|
Thu Feb 27 21:23:02 2025 |
Jens | DAQ | Python Data Channels | Python variables and names in DAQ
Because the Name of variables in DAQ doesnt
match the the real variables, here is List |
|
46
|
Fri Feb 28 00:44:31 2025 |
Denise, Sebastian | DAQ | Shutter auf - Shutter zu Go4 Signale | Shutter auf (TDC Kanal 12 / Go4 Kanal TrS11_Shutter
auf)
Shutter zu (TDC Kanal 13 / Go4 Kanal TrS12_Shutter |
|
55
|
Fri Feb 28 17:36:15 2025 |
Konstantin | DAQ | Trigger events from accelarator | We will use GENESIS to create trigger events
(injection, ...) for the DAQ |
|
57
|
Fri Feb 28 20:44:04 2025 |
Konstantin | DAQ | Updated Channel list | Final (hopefully) channel list:
[TABLE border="1"]
|
|
58
|
Sat Mar 1 03:45:07 2025 |
Denise, Benedikt, Sebastian | DAQ | PH100 Gentecs @ Medusa | Die zwei PH100 Messkoepfe am Nordwest und
Suedwest Tower werden delayed in Medusa angezeigt
und die Daten werden nicht an Medusa geschickt.
|
|
59
|
Sat Mar 1 03:58:17 2025 |
Denise, Benedikt, Sebastian | DAQ | DAQ Daten xchecks | Die allgemeinen DAQ Daten wurden ausfuehrlich
crossgechecked und kommen nun alle an wie
sie auch in die DAQ reinlaufen sollen.
|
|
60
|
Sat Mar 1 04:02:59 2025 |
Denise, Benedikt, Sebastian | DAQ | Lokale Datenaufnahme auf LXG1049 | Die Daten werden LOKAL auf dem LXG1049 unter
folgendem Verzeichnis gespeichert:
|
|
61
|
Sat Mar 1 04:10:48 2025 |
Denise, Benedikt, Sebastian | DAQ | DAQ Terminals | Es gibt nun 3 Terminals am LXG1049 die immer
offen sein sollten!
|
|
62
|
Sat Mar 1 07:01:41 2025 |
Denise, Benedikt, Sebastian | DAQ | UV Wellenlaenge in Python implementiert | Die UV Wellenlaenge des WS7 wurde zusaetzlich
zur WS7 Frequenz in Medusa hinzugefuegt um
den korrekten Wellenlaengenscan des Pulssystems |
|
70
|
Sat Mar 1 13:45:42 2025 |
Konstantin | DAQ | Gentec readout | Gentec readout is now included in the general
slow data acquisition. The issue was that
the buffer of the power meter was not emptied |
|
71
|
Sat Mar 1 16:33:22 2025 |
Konstantin | DAQ | Restart of Go4 | Restart of go4 before new scan:
1. Stop Acquisition (Stop button right next |
 |
72
|
Sat Mar 1 17:43:18 2025 |
Reinhold, Jens, Natalya, Danyal, Denise, Benedikt | DAQ | Scanbereich 257.175 nm - 257.675 nm | [TABLE border="1"]
Zeit | Scanbereich (nm) | Anzahl Laserschritte
| Start LMD | Stop LMD | Messdauer (s) | |
|
74
|
Sat Mar 1 19:19:25 2025 |
Konstantin | DAQ | Offline Analysis | A copy of the current go4 analysis is placed
at atplaser@lxgs1055:/kr_analysis. Use the
usual Go4 startup routine to start an offline |
 |
75
|
Sun Mar 2 03:07:43 2025 |
Denise, Benedikt, Danyal | DAQ | 0.0012 nm shifted scan: 257.1738 nm - 257.6754 nm | [TABLE border="1"]
Zeit | Scanbereich (nm) | Anzahl Laserschritte
| Start LMD | Stop LMD | Messdauer (s) | |
|
81
|
Sun Mar 2 18:55:30 2025 |
Jens, Reinhold, Danyal | DAQ | Main Scan range (4 blocks) shifted by -0.0012 nm --> one more scan | We decided to scan the main range, shifted
by -0.0012nm, one more time in order to have
the non-shifted AND the shifted range both |
|
82
|
Sun Mar 2 23:05:16 2025 |
*Jens, Reinhold, Danyal | DAQ | extended normal scan range (no shift): 257.6750 - 257.8022 nm | We will extend the max normal scan range by
3 measurements
|
|
93
|
Mon Mar 3 16:19:18 2025 |
Konstantin | DAQ | changed shutter timing - effective from 03.03.2025 @ 16:24 ! | The power and the fluctuations of the laser
should be recorded in the XUV Data, so that
the rate can be corrected.
|
 |
97
|
Mon Mar 3 20:14:10 2025 |
Jens, Konstantin, Reinhold, Danyal | DAQ | -0.0012 nm shifted whole range scan (@2nd ion energy) |
[TABLE border="1"]
Zeit | Scanbereich (nm) | Anzahl Laserschritte |
|
36
|
Thu Feb 27 09:59:08 2025 |
Konstantin | Calibration | HV-Divider | The readout of the HV divider runs on a RaspberryPi
inside the HV-cave of the electron cooler.
Starting from 2025-02-27 09:42, the divider |
|