ID |
Date |
Author |
Category |
Subject |
Text |
 |
73
|
Sat Mar 1 18:32:05 2025 |
Jens | Runs | Laser während Scan | 18:30Uhr:
Timestamp im Programm hat gehangen. Kurz
im Anzeigefeld markieren und es ging wieder.
|
|
68
|
Sat Mar 1 11:40:17 2025 |
Tamina, Florian, Konstantin | Calibration | Laser position | The laser position stayed perfect after the
scans. See picture. |
|
56
|
Fri Feb 28 19:33:03 2025 |
Volker | Detectors | Laser background | We measured the laser background rate in the
XUV detector.
The voltages applied were +300V at the MCP |
|
43
|
Fri Feb 28 00:18:16 2025 |
Tamina | General | Kalibration UV Monitor im Laserlabor | Der UV Monitor steht in der Reflexion des
PBSC auf dem Lasertisch im Laserlabor.
|
|
11
|
Tue Jan 28 15:57:05 2025 |
Denise | General | Justage: ESR Labor Periskop Spiegel oben | obere Schraube nach rechts drehen, dann bewegt
sich Laserspot nach links
selbe Schraube nach links dann Laser rechts
|
|
86
|
Mon Mar 3 08:02:00 2025 |
Danyal | Accelerator | Ionenenergie wird geändert | Hallo zusammen,
wir haben den Scan-Bereich vom Laser - bei |
|
50
|
Fri Feb 28 13:53:06 2025 |
Tamina, Rodolfo | Runs | Ionenbunch | Signal of PMT-Mitte. Recorded with an unstable
ion bunch. With approx. 3E8 Ions
|
 |
18
|
Thu Feb 6 12:54:29 2025 |
Danyal | Accelerator | HV-divider for electron cooler connected - readout is running | The HV-divider has been connected to the E-Cooler.
|
|
36
|
Thu Feb 27 09:59:08 2025 |
Konstantin | Calibration | HV-Divider | The readout of the HV divider runs on a RaspberryPi
inside the HV-cave of the electron cooler.
Starting from 2025-02-27 09:42, the divider |
|
52
|
Fri Feb 28 15:53:44 2025 |
Konstantin | Accelerator | HF Signal for Bunching | The HF Bunching Frequency is: 1.7838817 MHz
Given (read) by the ESR operators in HKR. |
|
39
|
Thu Feb 27 16:30:57 2025 |
Konstantin und Rodolfo | DAQ | HF Signal | We have exchanged the HF-Signal in the DAQ
Electronic: from Dummy-HF to the real HF
from accelerator. |
|
70
|
Sat Mar 1 13:45:42 2025 |
Konstantin | DAQ | Gentec readout | Gentec readout is now included in the general
slow data acquisition. The issue was that
the buffer of the power meter was not emptied |
|
101
|
Tue Mar 4 08:35:45 2025 |
Denise, Benedikt, Sebastian | Calibration | Gentec Kalibrationen im ESR | Gentec NW (PH100 S:UV) OD.3
[TABLE border="1"]
Leistung Gentec PH100 NW/ mW|0.475 | 0.961 |
|
47
|
Fri Feb 28 04:47:39 2025 |
Denise, Sebastian, Benedikt | Calibration | Gentec ESR Kalibration | Unsicherheiten Gentecs im allgemeinen bei
etwa 6.5%
|
|
79
|
Sun Mar 2 08:18:25 2025 |
Tamina, Volker, Florian, Rodolfo | General | Frühschicht | Die Frühschicht scan weiter. Siehe Eintrag
75 (noch als Draft) |
|
87
|
Mon Mar 3 08:33:00 2025 |
Tamina, Florian, Volker und Rodolfo | General | Fruehsicht | Die Fruehsicht macht den letzten Scan, bevor
die Ionenenergie geaendert wird. |
|
28
|
Mon Feb 17 13:49:20 2025 |
Denise | General | Frequenzbreiten Ionensystem | Berechnung der Frequenzbreiten des Lasers
im Ionensystem
Werte für die Frequezbreiten des Lasers aus |
|
51
|
Fri Feb 28 15:30:41 2025 |
Tamina, Rodolfo | Detectors | Fast PD Nord West | We had an issue with the PD NW. The signal
after the Rate Divider was not OK.
|
|
88
|
Mon Mar 3 08:52:19 2025 |
Tamina, Rodolfo, Volker, Danyal, Florian | Runs | Extended Scan 257.0574 nm - 257.8022 nm bei hoeherer Ionenenergie | Neue Umlauffrequenz: 1.78561578504741 MHz
rep freq laser : 3.57123157001
ecooler voltage: 157823 V
|
|
90
|
Mon Mar 3 13:00:51 2025 |
Danyal | General | Experiment will end tomorrow (04.03), at 08:00 AM precisely | The experiment will end tomorrow (04.03) at
08:00 AM precisely.
Everything (magnets, RF, etc) will be shut |
|