| ID |
Date |
Author |
Category |
Subject |
Year |
|
113
|
Sat Mar 21 09:30:32 2020 |
Ragan, RuiJiu, Alex | Runs | run entry - run058 | |
Open file: runstart058
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 9:00 , first file: run058_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 9:30 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 0 Hz
Xray_90: 49 Hz
Xray_145: 19 Hz
BaF_OR: Hz
Si voltage: 60.02 V
Si leakage current: 4.03 uA
SIS particles before: 3e9
ESR particles at injection: estimated ~1.1e6
ESR particles after decel.:
Target ON density: 1.56e13
copy and repeat the above (below the line) every 30 minutes |
|
112
|
Sat Mar 21 09:00:29 2020 |
Ragan, RuiJiu | Runs | run entry - run057 | |
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 08:30 , first file: run057_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 9:00 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 0 Hz
Xray_90: 46 Hz
Xray_145: 35 Hz
BaF_OR: 15Hz
Si voltage: 60.02 V
Si leakage current: 4.03 uA
SIS particles before: 3.4e9
ESR particles at injection: estimated ~1.3e6
ESR particles after decel.:
Target ON density: 1.5e13
copy and repeat the above (below the line) every 30 minutes |
|
111
|
Sat Mar 21 08:31:27 2020 |
Ragan, RuiJiu | Runs | run entry - run057 | |
Open file: runstart057
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 8:30 , first file: run057_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 8:30 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 12 Hz
Xray_90: 83 Hz
Xray_145: 70 Hz
BaF_OR: - Hz
Si voltage: 60.01 V
Si leakage current: 4.04 uA
SIS particles before: 3.2e9
ESR particles at injection: estimated ~1.3e6
ESR particles after decel.:
Target ON density: 1.53e13
copy and repeat the above (below the line) every 30 minutes |
|
110
|
Sat Mar 21 08:01:03 2020 |
Ragan, RuiJiu | Runs | run entry - run056 | |
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 07:30 , first file: run056_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 8:00 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 0 Hz
Xray_90: 38 Hz
Xray_145: 23 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 4.02 uA
SIS particles before: 3.3e9
ESR particles at injection: estimated ~1.02e6
ESR particles after decel.:
Target ON density: 1.7e13
copy and repeat the above (below the line) every 30 minutes |
|
109
|
Sat Mar 21 07:30:19 2020 |
Ragan, RuiJiu | Runs | run entry - run056 | |
Open file: runstart056
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 7:30 , first file: run056_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 7:30 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 0 Hz
Xray_90: 32 Hz
Xray_145: 41 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 4.04 uA
SIS particles before: 3.2e9
ESR particles at injection: estimated ~1.2e6
ESR particles after decel.:
Target ON density: 1.61e13
copy and repeat the above (below the line) every 30 minutes |
|
108
|
Sat Mar 21 07:00:18 2020 |
Ragan, RuiJiu, Tino, Oliver | Runs | run entry - run055 | |
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 06:30 , first file: run055_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 7:00 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 0 Hz
Xray_90: 31 Hz
Xray_145: 42 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 4.04 uA
SIS particles before: 3.6e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.49e13
copy and repeat the above (below the line) every 30 minutes |
|
107
|
Sat Mar 21 06:29:36 2020 |
Tino, Oliver | Runs | run entry - run055 | |
Open file: runstart055
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 06:29 , first file: run055_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 06:29 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 0 Hz
Xray_90: 36 Hz
Xray_145: 25 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 4.04 uA
SIS particles before: 2.3e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.36e13
copy and repeat the above (below the line) every 30 minutes |
|
106
|
Sat Mar 21 06:02:22 2020 |
Tino, Oliver | General | Detector filling | |
Run stopped for detector fillings |
|
105
|
Sat Mar 21 06:00:19 2020 |
Tino, Oliver | Runs | run entry - run054 | |
Open file: runstart054
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 05:00 , first file: run054_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 06:00 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 0 Hz
Xray_90: 58 Hz
Xray_145: 0 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 4.01 uA
SIS particles before: 2.2e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.47e13
copy and repeat the above (below the line) every 30 minutes |
|
104
|
Sat Mar 21 05:29:17 2020 |
Tino, Oliver | Runs | run entry - run054 | |
Open file: runstart054
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 05:00 , first file: run054_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 05:29 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 1 Hz
Xray_90: 25 Hz
Xray_145: 15 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 3.98 uA
SIS particles before: 2.4e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.31e13
copy and repeat the above (below the line) every 30 minutes |
|
103
|
Sat Mar 21 05:01:09 2020 |
Tino, Oliver | Runs | run entry - run054 | |
Open file: runstart054
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 05:00 , first file: run054_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 05:00 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 0 Hz
Xray_90: 19 Hz
Xray_145: 23 Hz
BaF_OR: - Hz
Si voltage: 60.01 V
Si leakage current: 3.98 uA
SIS particles before: 2.4e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.34e13
copy and repeat the above (below the line) every 30 minutes |
|
102
|
Sat Mar 21 04:29:59 2020 |
Tino, Oliver | Runs | run entry - run053 | |
Open file: runstart053
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 03:03 , first file: run053_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 04:30 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 0 Hz
Xray_90: 27 Hz
Xray_145: 17 Hz
BaF_OR: - Hz
Si voltage: 60.01 V
Si leakage current: 4.03 uA
SIS particles before: 2.4e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.40e13
copy and repeat the above (below the line) every 30 minutes |
|
101
|
Sat Mar 21 03:58:56 2020 |
Tino, Oliver | Runs | run entry - run053 | |
Open file: runstart053
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 03:03 , first file: run053_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 03:58 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 1 Hz
Xray_90: 21 Hz
Xray_145: 21 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 3.96 uA
SIS particles before: 2.5e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.16e13
copy and repeat the above (below the line) every 30 minutes |
|
100
|
Sat Mar 21 03:30:21 2020 |
Tino, Oliver | Runs | run entry - run052 | |
Open file: runstart052
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 03:03 , first file: run052_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 03:30 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 0 Hz
Xray_90: 22 Hz
Xray_145: 14 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 3.98 uA
SIS particles before: 2.5e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.23e13
copy and repeat the above (below the line) every 30 minutes |
|
99
|
Sat Mar 21 03:03:53 2020 |
Tino, Oliver | Runs | run entry - run052 | |
Open file: runstart052
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 03:03 , first file: run052_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 03:03 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 1 Hz
Xray_90: 19 Hz
Xray_145: 26 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 3.99 uA
SIS particles before: 2.3e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.22e13
copy and repeat the above (below the line) every 30 minutes |
|
98
|
Sat Mar 21 03:01:22 2020 |
Tino, Oliver | Runs | run entry - run051 | |
Open file: runstart051
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 01:59 , first file: run051_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 03:01 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 3 Hz
Xray_90: 23 Hz
Xray_145: 18 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 3.99 uA
SIS particles before: 2.3e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.24e13
copy and repeat the above (below the line) every 30 minutes |
|
97
|
Sat Mar 21 02:36:44 2020 |
Laszlo | General | detector and scraper position | |
For the 124Xe primary beam measurement:
-with the DSSSD we scraped the beam at position -40
-position of the detector is set to -25. (1.5cm away from the beam)
-with the scraper (at Eggelhof 1 position) we scraped the beam at ~(-15)-(-13)
-position of the scraper is set to +20 (3.5cm away from beam axis (sollbahn))
For the 118Te fragment measurement:
-with the DSSSD we scraped the beam at position -39
-position of the detector is set to -24 (1.5cm away from the beam)
-with the scraper (at Eggelhof 1 position) we scraped the beam at ~ -14
-position of the scraper is set to +19 (3.5cm away from beam axis (sollbahn)) |
| Attachment 1: IMG_20200321_025644.jpg
|
|
|
96
|
Sat Mar 21 02:31:48 2020 |
Laszlo, Tino, Oliver | Runs | run entry - run051 | |
Open file: runstart051
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 01:59 , first file: run051_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 02:31 am.
ON Rates
Si_X: 0-1 Hz
Si_Y: 0-2 Hz
Xray_35: 1-3 Hz
Xray_90: 39 Hz
Xray_145: 21 Hz
BaF_OR: - Hz
Si voltage: 60.01 V
Si leakage current: 3.98 uA
SIS particles before: 2.3e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.46e13
copy and repeat the above (below the line) every 30 minutes |
|
95
|
Sat Mar 21 02:15:19 2020 |
Laszlo, Tino, Oliver | Runs | run entry - run051 | |
Open file: runstart051
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 01:59 , first file: run051_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 01:59 am.
ON Rates
Si_X: 0-1 Hz
Si_Y: 0-1 Hz
Xray_35: 2 Hz
Xray_90: 33 Hz
Xray_145: 33 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 3.98 uA
SIS particles before: 2.3e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.46e13
copy and repeat the above (below the line) every 30 minutes |
|
94
|
Sat Mar 21 02:00:08 2020 |
Laszlo, Tino, Oliver | Runs | run entry - run051 | |
Beam is back at 01:59 am.
Open file: runstart051
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 01:59 , first file: run051_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 10:30
ON Rates
Si_X: 0-1 Hz
Si_Y: 0-1 Hz
Xray_35: 2 Hz
Xray_90: 33 Hz
Xray_145: 33 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 3.98 uA
SIS particles before: 2.3e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.46e13
copy and repeat the above (below the line) every 30 minutes |