 Sat Mar 21 02:00:08 2020, Laszlo, Tino, Oliver, Runs, run entry - run051,
|
Beam is back at 01:59 am.
Open file: runstart051
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 01:59 , first file: run051_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 10:30
ON Rates
Si_X: 0-1 Hz
Si_Y: 0-1 Hz
Xray_35: 2 Hz
Xray_90: 33 Hz
Xray_145: 33 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 3.98 uA
SIS particles before: 2.3e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.46e13
copy and repeat the above (below the line) every 30 minutes |
|
Sat Mar 21 02:15:19 2020, Laszlo, Tino, Oliver, Runs, run entry - run051,
|
Open file: runstart051
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 01:59 , first file: run051_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 01:59 am.
ON Rates
Si_X: 0-1 Hz
Si_Y: 0-1 Hz
Xray_35: 2 Hz
Xray_90: 33 Hz
Xray_145: 33 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 3.98 uA
SIS particles before: 2.3e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.46e13
copy and repeat the above (below the line) every 30 minutes |
|
Sat Mar 21 02:31:48 2020, Laszlo, Tino, Oliver, Runs, run entry - run051,
|
Open file: runstart051
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 01:59 , first file: run051_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 02:31 am.
ON Rates
Si_X: 0-1 Hz
Si_Y: 0-2 Hz
Xray_35: 1-3 Hz
Xray_90: 39 Hz
Xray_145: 21 Hz
BaF_OR: - Hz
Si voltage: 60.01 V
Si leakage current: 3.98 uA
SIS particles before: 2.3e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.46e13
copy and repeat the above (below the line) every 30 minutes |
|
Sat Mar 21 03:01:22 2020, Tino, Oliver, Runs, run entry - run051,
|
Open file: runstart051
beam: 118Te52+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -24 mm
run start at 01:59 , first file: run051_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 03:01 am.
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 3 Hz
Xray_90: 23 Hz
Xray_145: 18 Hz
BaF_OR: - Hz
Si voltage: 60.02 V
Si leakage current: 3.99 uA
SIS particles before: 2.3e9
ESR particles at injection: estimated ~10^5 - 10^4
ESR particles after decel.:
Target ON density: 1.24e13
copy and repeat the above (below the line) every 30 minutes |
|
Fri Mar 20 10:28:31 2020, Ragan, RuiJiu, Runs, run entry - run050,
|
Beam is back at 10:27 am.
Open file: runstart050
beam: 124Xe54+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -25 mm
run start at 10:27 , first file: run050_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 10:30
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 2 Hz
Xray_90: 35 Hz
Xray_145: 27 Hz
BaF_OR: 2441 Hz
Si voltage: 60.02 V
Si leakage current: 3.98 uA
SIS particles before: 2e9
ESR particles at injection: 5.8e7
ESR particles after decel.: 1.3e7
Target ON density: 1.38e13
copy and repeat the above (below the line) every 30 minutes |
Fri Mar 20 11:00:25 2020, Ragan, RuiJiu, Runs, run entry - run050, 
|
Yuri and ESR team are optimising
the deceleration in ESR.
DSSSD detector is taken out at
10:55 am.
The HV for DSSD is switched off at
11:10 am as the detector was out
and the leak current was ~18 uA.
At 11:11 am, the file was closed.
File close: run050 stopped.
update by Laszlo: the increase of the leakage current is due to the fact that we have a vacuum measurement device next to the DSSSD when it is moved out. The phenomena is normal, the DSSSD is hit by electrons (or ions) coming from the vacuum measurement device. |
|
Fri Mar 20 07:30:16 2020, Ragan, RuiJiu, Runs, run entry - run049,
|
beam: 124Xe54+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -25 mm
run start at 07:31 , first file: run049_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 07:30
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 0 Hz
Xray_90: 35 Hz
Xray_145: 23 Hz
BaF_OR: 2483 Hz
Si voltage: 60.02 V
Si leakage current: 4.02 uA
SIS particles before: 2.3e9
ESR particles at injection: 5.8e7
ESR particles after decel.: 5.8e6
Target ON density: 1.35e13
copy and repeat the above (below the line) every 30 minutes |
|
Fri Mar 20 08:01:40 2020, Ragan, RuiJiu, Runs, run entry - run049,
|
beam: 124Xe54+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -25 mm
run start at 07:31 , first file: run049_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 08:00
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 2 Hz
Xray_90: 33 Hz
Xray_145: 29 Hz
BaF_OR: 2673 Hz
Si voltage: 60.01 V
Si leakage current: 4.00 uA
SIS particles before: 2e9
ESR particles at injection: 5.7e7
ESR particles after decel.: 5.1e6
Target ON density: 1.5e13
copy and repeat the above (below the line) every 30 minutes |
|
Fri Mar 20 08:30:52 2020, Ragan, RuiJiu, Runs, run entry - run049,
|
There is no beam due to water leakage in the transfer channel of SIS.
Stop file: run049 at 8:29 am |
|
Fri Mar 20 06:34:40 2020, Shahab, Runs, run entry - run048,
|
beam: 124Xe54+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -25 mm
run start at 06:33 , first file: run048_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 06:36
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 0 Hz
Xray_90: 39 Hz
Xray_145: 16 Hz
BaF_OR: 2590 Hz
Si voltage: 60.02 V
Si leakage current: 4.0 uA
SIS particles before: 2e9
ESR particles at injection: 5.8e7
ESR particles after decel.: 5.2e6
Target ON density: 1.55e13
copy and repeat the above (below the line) every 30 minutes |
|
Fri Mar 20 07:01:06 2020, Shahab, Runs, run entry - run048,
|
beam: 124Xe54+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -25 mm
run start at 06:33 , first file: run048_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 07:00
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 1 Hz
Xray_90: 39 Hz
Xray_145: 38 Hz
BaF_OR: 2498 Hz
Si voltage: 60.02 V
Si leakage current: 4.03 uA
SIS particles before: 2e9
ESR particles at injection: 5.8e7
ESR particles after decel.: 5.4e6
Target ON density: 1.57e13
copy and repeat the above (below the line) every 30 minutes |
|
Fri Mar 20 05:32:44 2020, Shahab, Runs, run entry - run047,
|
beam: 124Xe54+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -25 mm
run start at 05:30 , first file: run047_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 05:30
ON Rates
Si_X: 0 Hz
Si_Y: 0 Hz
Xray_35: 2 Hz
Xray_90: 27 Hz
Xray_145: 20 Hz
BaF_OR: 2379 Hz
Si voltage: 60.02 V
Si leakage current: 3.93 uA
SIS particles before: 2e9
ESR particles at injection: 5e7
ESR particles after decel.: 5e6
Target ON density: 1.97e13
copy and repeat the above (below the line) every 30 minutes |
|
Fri Mar 20 06:00:26 2020, Shahab, Runs, run entry - run047,
|
beam: 124Xe54+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -25 mm
run start at 05:30 , first file: run047_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 06:00
ON Rates
Si_X: 1 Hz
Si_Y: 1 Hz
Xray_35: 3 Hz
Xray_90: 33 Hz
Xray_145: 23 Hz
BaF_OR: 2512 Hz
Si voltage: 60.02 V
Si leakage current: 3.94 uA
SIS particles before: 2e9
ESR particles at injection: 5.3e7
ESR particles after decel.: 5.8e6
Target ON density: 1.97e13
copy and repeat the above (below the line) every 30 minutes |
|
Fri Mar 20 04:32:22 2020, Shahab, Runs, run entry - run046,
|
beam: 124Xe54+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -25 mm
run start at 04:31 , first file: run046_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 04:31:44
ON Rates
Si_X: 1 Hz
Si_Y: 1 Hz
Xray_35: 3 Hz
Xray_90: 33 Hz
Xray_145: 23 Hz
BaF_OR: 2463 Hz
Si voltage: 60.02 V
Si leakage current: 3.93 uA
SIS particles before: 2e9
ESR particles at injection: 5e7
ESR particles after decel.: 2e6
Target ON density: 1.8e13
copy and repeat the above (below the line) every 30 minutes |
|
Fri Mar 20 05:03:03 2020, Shahab, Runs, run entry - run046,
|
beam: 124Xe54+
energy: 10 MeV/u
purpose: data with TARGET ON
Detector position (Si): -25 mm
run start at 04:31 , first file: run046_0001.lmd
run stop at xx:xx , last file: run0xx_0xxx.lmd
_______________________________________________________________________________
time: 05:00
ON Rates
Si_X: 1 Hz
Si_Y: 1 Hz
Xray_35: 3 Hz
Xray_90: 28 Hz
Xray_145: 24 Hz
BaF_OR: 2452 Hz
Si voltage: 60.02 V
Si leakage current: 3.93 uA
SIS particles before: 2e9
ESR particles at injection: 5e7
ESR particles after decel.: 2e6
Target ON density: 1.8e13
copy and repeat the above (below the line) every 30 minutes |
|
Mon Mar 23 04:08:12 2020, Shahab, Runs, run 93 stopped,
|
run 93 which was during faulty kicker was stopped so that the kicker module can be repaired. |
|
Sat Mar 21 18:13:22 2020, Shahab, General, rough comparison gas target off and on,
|
rough comparison of life time at 10 MeV/u when target off with on. more noise in background means weaker signal. |
|
Wed Oct 13 15:15:53 2021, Jan, DAQ, root-file header for analysis, 2021
|
Attached is the header file needed for root analysis. |
|
Sat Mar 21 23:12:38 2020, Jan, Detectors, removed BaF detectors,
|
After run 67 and before run 68, the BaF detectors have been removed in order to reduce the Compton background in the x-ray detectors. |
|
Sun May 30 14:40:55 2021, Jan, Sophia, Detectors, real detector assignment, 2021
|
************************************
GEM1800 @ 90deg (xray1)
GLP2000 @ 35deg (xray2)
GEM3000 @ 145deg (xray3)
************************************
Was noted wrongly in most calib runs. |