 Sat May 22 14:53:34 2021, Beatriz et al., General, DSSD Movement, 2021
|
| DSSSD moved to the most in position in order to try to scrape the beam with the scraper. |
|
Sat May 22 16:28:10 2021, Laszlo, General, DSSSD movement, 2021
|
| The DSSSD is moved back to its measurement position(-25mm). |
|
Sat May 22 16:29:07 2021, Laszlo et al., General, coolers are back, 2021
|
we can measure again.
(please write a detailed description if needed) |
|
Sat May 22 17:01:33 2021, Pierre-Michel & Enis, Runs, Run 0072, 2021
|
open file : e127b_run0072.lmd
beam: 124Xe54+
|
|
Sat May 22 17:13:48 2021, Laszlo, Detectors, Si position changed, 2021
|
| Si was moved from -25 mm to -19 mm before run 0072. |
|
Sat May 22 17:15:26 2021, Laszlo, General, Scraper position, 2021
|
We found the beam axis with the scraper to be -17.5 mm.
The Scraper position set to +12.5 mm, 30 mm relative from the beam. |
|
Sat May 22 18:05:22 2021, Pierre-Michel & Enis, Runs, Run 0073, 2021
|
open file : e127b_run0073.lmd
beam: 124Xe54+
|
|
Sat May 22 19:05:13 2021, Pierre-Michel & Enis, Runs, Run 0074, 2021
|
Note: SIS lost HF, no beam since 19:21. Stopped run early
open file : e127b_run0074.lmd
|
|
Sat May 22 19:32:28 2021, Pierre-Michel & Enis, Runs, Run 0075, 2021
|
open file : e127b_run0075.lmd
beam: 124Xe54+
|
|
Sat May 22 20:46:19 2021, Laszlo, Pierre.Michel, Enis, General, new scraper position, 2021
|
The scraper was moved into 2.5mm in absolute which corresponds to 20mm away from the beam axis.
Pressluft Antriebe
|
|
Sat May 22 20:47:39 2021, Pierre-Michel & Enis, Runs, Run 0076, 2021
|
open file : e127b_run0076.lmd
beam: 124Xe54+
|
|
Sat May 22 21:33:22 2021, Laszlo, Detectors, Xray detectors are filled at 90 and 35, 2021
|
| |
|
Sat May 22 21:40:09 2021, Pierre-Michel & Enis, Runs, Run 0077, 2021
|
open file : e127b_run0077.lmd
beam: 124Xe54+
|
|
Sat May 22 22:25:42 2021, Pierre-Michel & Enis, Runs, Run 0078, 2021
|
open file : e127b_run0078.lmd
beam: 124Xe54+
|
|
Sat May 22 22:29:48 2021, Laszlo, Pierre.Michel, Enis, General, new scraper position, 2021
|
The scraper was moved into 7.5 mm in absolute which corresponds to 25 mm away from the beam axis.
Pressluft Antriebe
|
|
Sat May 22 23:28:08 2021, Philipp, Benny, Runs, Run 0079, 2021
|
open file : e127b_run0079.lmd
beam: 124Xe54+
|
|
Sun May 23 00:35:33 2021, Philipp, Benny, Runs, Run 0080, 2021
|
open file : e127b_run0080.lmd
beam: 124Xe54+
|
|
Sun May 23 01:36:04 2021, Philipp, Benny, Runs, Run 0081, 2021
|
open file : e127b_run0081.lmd
beam: 124Xe54+
|
Sun May 23 02:16:47 2021, Laszlo, General, quick comparison between different scraping positions, 2021 
|
So far we did 3 scraping positions:
- 30mm away from beam axis (lmd72-75)
- 25mm away from beam axis (lmd78-80)
|
|
Sun May 23 02:36:07 2021, Philipp, Benny, Runs, Run 0082, 2021
|
open file : e127b_run0082.lmd
beam: 124Xe54+
|