HOME ESR EXPERIMENTS LABS etc
E121 E127 E132 E125 E143 laser_cooling_2021 E142 Ê128 E146 E0052 E0018
  Bound beta decay experiment on Tl-205, Page 7 of 9  Not logged in ELOG logo
ID Date Authorup Category Subject
  72   Mon Mar 30 03:30:03 2020 Sergiy, DimaRunsSecond measurement with 206Pb81+ beam at I_cooler = 200 mA
I_cooler = 200 mA

beam: 206Pb81+
energy: 400 MeV/u

purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas

Detector position (CsISiPHOS): 60 mm
Detector position (MWPC):     -10 mm

run start at 02:24 , run file: run0267.lmd  (0266.lmd is garbage file)
file running: 0267.lmd

_______________________________________________________________________________

time: 03:30

I_cooler = 176 mA
      
ESR particles:  3.6E6
        


NTCAp file:
SC_2020-03-30_02-27-10
IQ_2020-03-30_02-27-10
(saved in drive: p)

copy and repeat the above (below the line) every 30 minutes
  73   Mon Mar 30 04:00:19 2020 Sergiy, DimaRunsSecond measurement with 206Pb81+ beam at I_cooler = 200 mA
I_cooler = 200 mA

beam: 206Pb81+
energy: 400 MeV/u

purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas

Detector position (CsISiPHOS): 60 mm
Detector position (MWPC):     -10 mm

run start at 02:24 , run file: run0267.lmd  (0266.lmd is garbage file)
file running: 0267.lmd

_______________________________________________________________________________

time: 04:00

I_cooler = 176 mA
      
ESR particles:  3.0E6
        


NTCAp file:
SC_2020-03-30_02-27-10
IQ_2020-03-30_02-27-10
(saved in drive: p)

copy and repeat the above (below the line) every 30 minutes
  75   Mon Mar 30 04:30:17 2020 Sergiy, DimaRunsSecond measurement with 206Pb81+ beam at I_cooler = 200 mA
I_cooler = 200 mA

beam: 206Pb81+
energy: 400 MeV/u

purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas

Detector position (CsISiPHOS): 60 mm
Detector position (MWPC):     -10 mm

run start at 02:24 , run file: run0267.lmd  (0266.lmd is garbage file)
file running: 0267.lmd

_______________________________________________________________________________

time: 04:30

I_cooler = 176 mA
      
ESR particles:  2.5E6
        


NTCAp file:
SC_2020-03-30_02-27-10
IQ_2020-03-30_02-27-10
(saved in drive: p)

copy and repeat the above (below the line) every 30 minutes
  13   Wed Jan 29 10:42:42 2020 ShahabGeneralGas target control with the new control system event
Many thanks to Sergey and Nikos we have tested the connection of the new control system for turning on and off of the gas target.

Connections:

For the test event machines 12 (event 162) and 14 (event 163) were chosen for gas target on and off. The old Pulzzentrale code remains unchanged on 10. The middle output of the TIF editors can then be connected to the gas target control.

The created pulses were measured on the oscilloscope and hat the duration of 1us and amplitude of 5V.

The gas target control then produces the required long pulse which comes out as a BNC connection. If in the local mode, gas target can controlled by out-on and out-off. For the above scenario, we need the event mode.

The output of the gas target control is connected to the ESR-Messhuette-Panel number 2, which goes back to Messhuete and form there to the top of ESR.


All connections are working properly until the gas target itself.

Software:

Different subchains can be activated and deactivated on demand. Also their duration can be changed on the fly, but currently a change in other settings (such as Quadrupoles) might reset the duration values to their default.
Attachment 1: IMG_20200128_153508.jpg
IMG_20200128_153508.jpg
Attachment 2: IMG_20200128_145345.jpg
IMG_20200128_145345.jpg
Attachment 3: IMG_20200128_145340.jpg
IMG_20200128_145340.jpg
Attachment 4: IMG_20200128_145307.jpg
IMG_20200128_145307.jpg
Attachment 5: IMG_20200128_144555.jpg
IMG_20200128_144555.jpg
  56   Sun Mar 29 18:55:19 2020 ShahabRunsFrequency list for identification
Here are some frequencies for identification of the fragments.

Center freq: 243.352675
span: 2 MHz

from left to right:

242.480175
242.645175
242.807675
242.855175
242.972675
243.247675
243.260175
243.300175
243.330175
243.342675
243.352675 --> largest peak possibly 205-Tl-81+ (not 100% sure)
243.415175
243.450175
243.555175
243.627675
243.752675
243.790175
243.807675
243.955175
244.117675
244.282675
Attachment 1: freqs.jpg
freqs.jpg
  110   Tue Mar 31 23:31:41 2020 ShahabRunsalpha_p calibration
Vc = 212849.9349
Ic = 0.2

1)

Vcc=6400
f= 245.314
Veff= 219218.2989884789
β= 0.7143483279777152 
γ= 1.4289995125817443  


2)

Vcc=6800
f=245.227
Veff= 219618.31558866
β= 0.7147234572628363 
γ= 1.4297823255462372  

3)

Vcc=6000
f=245.404
Veff= 218818.2823347592
β= 0.7139723840585469 
γ= 1.4282166995124788  


Taking 1) and 2):

η : 0.33044950273377705 

αp1: 0.15925696358166558 
αp2: 0.1587208769044816 

Taking 1) and 3):

η : 0.34166460537796267 

αp1: 0.14804186093747995 
αp2: 0.14857882942379202 

Taking 2) and 3):

η : 0.33653854822327256 

αp1: 0.1526318314149861 
αp2: 0.15370488657848214  


αp average: 0.1534892081401479
Attachment 1: ap_calibration.jpg
ap_calibration.jpg
  132   Fri Apr 3 10:06:15 2020 ShahabRunsPlots from Scopes
Just two plots from the scopes for documentation:

magnets.png:

yellow: dipole
green and blue: quadrupoles
red: ESR current


kicker.png:

blue: SIS kicker
yellow: ESR kicker

green: SIS current
red: ESR current

trigger: SIS Kicker
Attachment 1: magnets.png
magnets.png
Attachment 2: kicker.png
kicker.png
  133   Fri Apr 3 11:52:27 2020 ShahabRunsStacking 54 times!
Attachment 1: 2020-04-03_11-48-11-781.png
2020-04-03_11-48-11-781.png
  138   Fri Apr 3 14:08:41 2020 ShahabRunsStacking
Attachment 1: 2020-04-03_14-07-13-250.png
2020-04-03_14-07-13-250.png
  139   Fri Apr 3 17:55:13 2020 ShahabRunsNice picture from 205-Tl
In this high contrast Schottky recording, the main three frequency peaks are resolved w.r.t. time from left to right:

203 Hg 80 +, 200 Hg 79+ and 205 Tl 81+

There are also some spurs visible, whose nature is not 100% sure. One possible explanation can be:

Since this is taken during the storage time (gas target still off), we have no separation between parent and daughter ions, the daughter 205 Pb 81+ basically has the same revolution frequency as parent. It is a possibility that after the decay, daughter ions are slowly cooled back to the nominal frequency. Daughter ions are highly charged and have a high velocity, so single ion sensitivity is expected. They come from all directions, but Schottky measures only the longitudinal plane. Symmetric spurs can hence be an indication of this.
Attachment 1: Tl-daughter_spurs.PNG
Tl-daughter_spurs.PNG
  146   Sat Apr 4 13:41:04 2020 ShahabRunscooler down
cooler is down. only one device is off GECEBG2T. updated now it is working.
  154   Sun Apr 5 10:21:54 2020 ShahabRuns10 hour measurement pictures
Schottky pictures from the 10 hour measurement gas target, including the time before gas target.
Attachment 1: 2020-04-05-10h-aftergasjet2.PNG
2020-04-05-10h-aftergasjet2.PNG
Attachment 2: 2020-04-05-10h-aftergasjet.PNG
2020-04-05-10h-aftergasjet.PNG
Attachment 3: 205Tl_gasjet_view3.PNG
205Tl_gasjet_view3.PNG
  156   Sun Apr 5 12:48:58 2020 ShahabRuns2hour measurement parent pictures
Attachment 1: gas_jet_mother_245.PNG
gas_jet_mother_245.PNG
Attachment 2: gas_jet_mother_410.png
gas_jet_mother_410.png
Attachment 3: IBS_245MHz_all_ions_1D.PNG
IBS_245MHz_all_ions_1D.PNG
Attachment 4: IBS_245MHz_all_ions.PNG
IBS_245MHz_all_ions.PNG
Attachment 5: IBS_245MHz_zoom_ions_1D_wo_marker.PNG
IBS_245MHz_zoom_ions_1D_wo_marker.PNG
Attachment 6: IBS_245MHz_zoom_ions_1D.PNG
IBS_245MHz_zoom_ions_1D.PNG
  166   Mon Apr 6 09:34:58 2020 ShahabRunsPictures from one and a half hour measurement
cheers!
Attachment 1: wideband_rec_001.PNG
wideband_rec_001.PNG
  168   Mon Apr 6 14:57:04 2020 ShahabRunscooler down
cooler component GECEBG2T again had to be reset.
  81   Mon Mar 30 07:34:06 2020 TinoRunsSecond measurement with 206Pb81+ beam at I_cooler = 20 mA
I_cooler = 20 mA

beam: 206Pb81+
energy: 400 MeV/u

purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas

Detector position (CsISiPHOS): 60 mm
Detector position (MWPC):     -10 mm

run start at 06:08 , run file: run0270.lmd  (0268.lmd and 0269.lmd are garbage files)
file running: 0270.lmd

_______________________________________________________________________________

time: 07:30

I_cooler = -01 mA

      
ESR particles:  2.8E5
        


NTCAp file:
SC_2020-03-30_06-11-08
IQ_2020-03-30_06-11-16
(saved in drive: p)

copy and repeat the above (below the line) every 30 minutes
  82   Mon Mar 30 08:00:40 2020 TinoRunsSecond measurement with 206Pb81+ beam at I_cooler = 20 mA
I_cooler = 20 mA

beam: 206Pb81+
energy: 400 MeV/u

purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas

Detector position (CsISiPHOS): 60 mm
Detector position (MWPC):     -10 mm

run start at 06:08 , run file: run0270.lmd  (0268.lmd and 0269.lmd are garbage files)
file running: 0270.lmd

_______________________________________________________________________________

time: 08:00

I_cooler = -01 mA

      
ESR particles:  2.6E5
        


NTCAp file:
SC_2020-03-30_06-11-08
IQ_2020-03-30_06-11-16
(saved in drive: p)

copy and repeat the above (below the line) every 30 minutes
  83   Mon Mar 30 08:32:05 2020 TinoRunsSecond measurement with 206Pb81+ beam at I_cooler = 20 mA
I_cooler = 20 mA

beam: 206Pb81+
energy: 400 MeV/u

purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas

Detector position (CsISiPHOS): 60 mm
Detector position (MWPC):     -10 mm

run start at 06:08 , run file: run0270.lmd  (0268.lmd and 0269.lmd are garbage files)
file running: 0270.lmd

_______________________________________________________________________________

time: 08:30

I_cooler = -01 mA

      
ESR particles:  2.5E5
        


NTCAp file:
SC_2020-03-30_06-11-08
IQ_2020-03-30_06-11-16
(saved in drive: p)

copy and repeat the above (below the line) every 30 minutes
  84   Mon Mar 30 08:56:04 2020 TinoRunsSecond measurement with 206Pb81+ beam at I_cooler = 10 mA
I_cooler = 10 mA

beam: 206Pb81+
energy: 400 MeV/u

purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas

Detector position (CsISiPHOS): 60 mm
Detector position (MWPC):     -10 mm

run start at 08:52 , run file: run0271.lmd 


_______________________________________________________________________________

time: 08:52

I_cooler = -01 mA

SIS particles: 3.4E8      
ESR particles:  4.7E6
        


NTCAp file:
SC_2020-03-30_08-54-42
IQ_2020-03-30_08-54-42
(saved in drive: p)

copy and repeat the above (below the line) every 30 minutes
  85   Mon Mar 30 09:26:37 2020 TinoRunsStopped Second measurement with 206Pb81+ beam at I_cooler = 10 mA
Stopped Data recording for Restart of the measurement

I_cooler = 10 mA

beam: 206Pb81+
energy: 400 MeV/u

purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas

Detector position (CsISiPHOS): 60 mm
Detector position (MWPC):     -10 mm

run start at 08:52 , run file: run0271.lmd 


_______________________________________________________________________________

time: 09:27

I_cooler = -01 mA

SIS particles: 3.4E8      
ESR particles:  2.5E5
        


NTCAp file:
SC_2020-03-30_08-54-42
IQ_2020-03-30_08-54-42
(saved in drive: p)

copy and repeat the above (below the line) every 30 minutes
ELOG V3.1.5-fc6679b