 Fri Mar 20 19:37:43 2020, Jan, Calibration, Xray energies - rough 1. calibration ,
|
-- E calibration seems to have changed! ---
This calibration is based on the source data taken before the experiment:
|
|
Fri Mar 20 22:26:42 2020, Jan, Detectors, BaF2 deactivated,
|
| BaF2 detectors are deactivated nor for the following runs. |
Fri Mar 20 22:51:36 2020, Laszlo, General, Target on signal change, 
|
From the previous settings:
JetOn
mashine number 11
|
|
Fri Mar 20 22:54:30 2020, Laszlo, General, First view of the beam,
|
Intensity from Sis 1.7E9
The intensity is too.low at ESR to be visible. However we could.catch it somehow with Shottky (picture below) |
|
Fri Mar 20 23:43:26 2020, Laszlo, General, Vacuum while moving in the detector at yesterday evening,
|
Vacuum before DSSSD movement: 1.5844E-11
Top value after movement: 3.64378E-11
|
|
Sat Mar 21 01:25:07 2020, Laszlo, General, Vacuum while moving in the detector for fragment measurement,
|
Stayed below E-10
Start:2.42E-11
Top after moving: 4.144E-11 |
|
Sat Mar 21 01:44:57 2020, Laszlo, General, ,
|
| from the SIS side they could optimize the intensity. we gained a factor ~3. Now the SIS intensity is at |
|
Sat Mar 21 02:00:08 2020, Laszlo, Tino, Oliver, Runs, run entry - run051,
|
Beam is back at 01:59 am.
Open file: runstart051
|
|
Sat Mar 21 02:15:19 2020, Laszlo, Tino, Oliver, Runs, run entry - run051,
|
Open file: runstart051
beam: 118Te52+
|
|
Sat Mar 21 02:31:48 2020, Laszlo, Tino, Oliver, Runs, run entry - run051,
|
Open file: runstart051
beam: 118Te52+
|
|
Sat Mar 21 02:36:44 2020, Laszlo, General, detector and scraper position,
|
For the 124Xe primary beam measurement:
-with the DSSSD we scraped the beam at position -40
-position of the detector is set to -25. (1.5cm away from the beam)
|
|
Sat Mar 21 03:01:22 2020, Tino, Oliver, Runs, run entry - run051,
|
Open file: runstart051
beam: 118Te52+
|
|
Sat Mar 21 03:03:53 2020, Tino, Oliver, Runs, run entry - run052,
|
Open file: runstart052
beam: 118Te52+
|
|
Sat Mar 21 03:30:21 2020, Tino, Oliver, Runs, run entry - run052,
|
Open file: runstart052
beam: 118Te52+
|
|
Sat Mar 21 03:58:56 2020, Tino, Oliver, Runs, run entry - run053,
|
Open file: runstart053
beam: 118Te52+
|
|
Sat Mar 21 04:29:59 2020, Tino, Oliver, Runs, run entry - run053,
|
Open file: runstart053
beam: 118Te52+
|
|
Sat Mar 21 05:01:09 2020, Tino, Oliver, Runs, run entry - run054,
|
Open file: runstart054
beam: 118Te52+
|
|
Sat Mar 21 05:29:17 2020, Tino, Oliver, Runs, run entry - run054,
|
Open file: runstart054
beam: 118Te52+
|
|
Sat Mar 21 06:00:19 2020, Tino, Oliver, Runs, run entry - run054,
|
Open file: runstart054
beam: 118Te52+
|
|
Sat Mar 21 06:02:22 2020, Tino, Oliver, General, Detector filling,
|
| Run stopped for detector fillings |