 Fri Mar 20 01:22:23 2020, Shahab, Runs, Setting for Gas target, 
|
| Setting for the machines. |
|
Fri Mar 20 04:32:22 2020, Shahab, Runs, run entry - run046,
|
beam: 124Xe54+
energy: 10 MeV/u
|
|
Fri Mar 20 05:03:03 2020, Shahab, Runs, run entry - run046,
|
beam: 124Xe54+
energy: 10 MeV/u
|
|
Fri Mar 20 05:32:44 2020, Shahab, Runs, run entry - run047,
|
beam: 124Xe54+
energy: 10 MeV/u
|
|
Fri Mar 20 06:00:26 2020, Shahab, Runs, run entry - run047,
|
beam: 124Xe54+
energy: 10 MeV/u
|
|
Fri Mar 20 06:34:40 2020, Shahab, Runs, run entry - run048,
|
beam: 124Xe54+
energy: 10 MeV/u
|
|
Fri Mar 20 07:01:06 2020, Shahab, Runs, run entry - run048,
|
beam: 124Xe54+
energy: 10 MeV/u
|
|
Sat Mar 21 18:13:22 2020, Shahab, General, rough comparison gas target off and on,
|
| rough comparison of life time at 10 MeV/u when target off with on. more noise in background means weaker signal. |
|
Sun Mar 22 12:50:00 2020, Shahab, Runs, Life time of 10 MeV/u Tail of 118-Te-52+,
|
The life time of 10 MeV/u Tail of cycle 118-Te-52+ was analyzed using Schottky peak intensity. Schottky signal was taken from the parallel plate Schottky
monitor at using the:
|
|
Sun Mar 22 23:59:12 2020, Shahab, Runs, run entry - run091,
|
Taking data again with primary beam.
open file : run090
|
|
Mon Mar 23 00:36:51 2020, Shahab, Runs, run entry - run091,
|
Taking data again with primary beam.
open file : run091
|
|
Mon Mar 23 00:39:52 2020, Shahab, General, Ramping cycle picture and data,
|
Complete ramping cycle recorded from Oscilloscope Tektronix MSOX2024A.
Stored as XLS file. |
|
Mon Mar 23 01:17:26 2020, Shahab, General, Life time measurements using Schottky,
|
Did Schottky measurements using 5 shots with and without gas target each
restarting the DAQ |
|
Mon Mar 23 01:18:16 2020, Shahab, Runs, run entry - run092,
|
Taking data again with primary beam.
open file : run092
|
|
Mon Mar 23 01:53:59 2020, Shahab, Runs, Empty shots in ESR,
|
since about 01:40 AM, there is no beam in ESR. .
stopped data acquisition
OPs are working on it. After searching, OPs decided that something is wrong with ESR. |
|
Mon Mar 23 03:04:56 2020, Shahab, Runs, run entry - run093,
|
RUN 93 is with faulty SIS kicker module. Let's see what we can get. waiting for SIS kicker on-call duty (rufbereitschaft) to come.
open file : run093
|
|
Mon Mar 23 03:07:11 2020, Shahab, Runs, SIS Kicker problem,
|
After calling ESR on-call duty (M. Steck) he confirmed that the ESR is fine and suspected the SIS kicker modules.
SIS operators then checked and could confirm that module 5 is out of order and module 4 sometimes works sometimes not.
|
|
Mon Mar 23 03:38:01 2020, Shahab, Runs, run entry - run093,
|
RUN 93 is with faulty SIS kicker module. Let's see what we can get. waiting for SIS kicker on-call duty (rufbereitschaft) to come.
open file : run093
|
|
Mon Mar 23 03:53:41 2020, Shahab, Runs, Reduced intensity inspite of faulty kicker,
|
| SIS Kicker is still faulty. but we managed to reduce again the intensity to around 2e6 particles in ring to reduce scattering on scraper. |
|
Mon Mar 23 03:58:25 2020, Shahab, General, Kicker guy arrived,
|
| Kicker Guy (U. Blell) arrived in order to fix modules. |