Thu Sep 13 11:32:17 2018, Jan Glorius, Collaboration, Proposal
|
Attached is the beam time proposal submitted and accepted by the G-PAC in 2017. |
Mon Dec 3 15:06:04 2018, Chen, Sidhu, DAQ, Test of two preamplifier.
|
[B]Description:[/B]
We have two pre-amplifiers:
New: Max. range 5GeV, Two sensitivity options: 1 GeV and 5 GeV, Decay time = 30 us, pulse input 220 MeV/u, Ser. #MPR-32-D-5000-30-1118380.
|
Wed Dec 5 17:29:24 2018, Chen, Sidhu, Detectors, signal map 13x
|
[B]Description:[/B]
Here is a summary of signal map. The charged particle detector includes 6 layers of Si-Pad, 1 DSSD and 1 CsI.
|
Fri Dec 7 10:56:04 2018, Jan Glorius, SlowControl, EPICS ioc on raspberry
|
We have an EPCIS server (ioc) running on our raspberry (ext-027377). It talks to our MesyTec modules (MSCF shapers, MHV4 high-voltages).
In principal it should be running all the time, but here is the manual how to check/start it:
|
Fri Dec 7 11:39:41 2018, Jan Glorius, SlowControl, GUI for remote control of MSCF+MHV4
|
We have a GUI for remote controlling our MesyTec modules MSCF16 and MHV4 for E121 experiment.
Here is the instructions to run it:
|
Mon Dec 10 11:59:15 2018, Chen, Sidhu, Detectors, Test of shaping amplifier.
|
[IMG]elog:6/1[/IMG]
[IMG]elog:6/2[/IMG]
|
Tue Mar 12 12:54:58 2019, Chen, Sidhu, DAQ, how to start DAQ and plot histogram.
|
[B]1. login litv-exp account[/B]
rchen@lxg1254:/data.local2/2002_238UIMS$ ssh -X litv-exp@lxg0155.gsi.de
(don't login on lx-pool.)
|
Tue May 7 15:52:47 2019, Chen, Sidhu, SlowControl, GUI for remote control of MSCF+MHV4 [detailed]
|
We have a GUI for remote controlling our MesyTec modules MSCF16 and MHV4 for E121 experiment.
Here is the instructions to run it:
|
Tue May 28 08:36:14 2019, Jan, DAQ, MBS start & RFIO server
|
You need a DAQ-PC and the RIO crate computer.
All of the DAQ proceedures laid out here are operated from inside the DAQ screen session.
Right now for e121 the following DAQ-setup is used: (might change in the future)
|
Wed Jun 26 16:20:31 2019, Jan, DAQ, unpacker: lmd > root
|
I have written an unpacker for the lmd data taken with the current daq-system for E121.
The crate configuration is as follows:
ADC1 channels 1-32 (Caen 785)
|
Tue Aug 27 14:53:47 2019, Chen, Sidhu, Detectors, The thickness uncertainty of Ta is less than 1%.
|
The thickness of Ta plate have been measured by target group. The result is show as following.
According to this measurement, the thickness uncertainty is less than 1%.
This thickness uncertainty is good enough for Tl experiment.
|
Thu Oct 24 15:36:13 2019, Chen, Sidhu, Detectors, Detector installation process
|
[IMG]elog:12/1[/IMG]
[IMG]elog:12/2[/IMG]
[IMG]elog:12/3[/IMG] |
Wed Jan 29 10:42:42 2020, Shahab, General, Gas target control with the new control system event
|
Many thanks to Sergey and Nikos we have tested the connection of the new control system for turning on and off of the gas target.
|
Fri Feb 21 11:30:52 2020, Laszlo, General, Shift plan
|
e127: https://docs.google.com/spreadsheets/d/14m8WcCq1erx6HqWJRK7TLbCx121IkjqGa5l-frf4YjI/edit#gid=0
e121: https://docs.google.com/spreadsheets/d/10MUzA5-Ilf2WzCyNj8u_KSG6yzPg0e4vtZGGPFB3K-k/edit#gid=0 |
Tue Feb 25 15:48:31 2020, ruijiu chen, DAQ, Important folders of e121 eperiments:
|
1. slow control:
1.1. program file:
litv-exp@ringpi:~/epics/mrcc_ioc/db $
|
Tue Feb 25 15:49:58 2020, ruijiu chen, DAQ, changing scaling factor.
|
How to change scaling factor?
The parameters is in f_user.c file:
1. open the f_user.C with emacs :
|
Thu Feb 27 14:04:12 2020, Ruijiu Chen, Detectors, Remote control of HV module
|
Be careful. The voltage value on user interface is 10 times of real value. e.g. if the real value is 32V, the voltage value on UI has to be 320V.
[IMG]elog:17/1[/IMG] |
Thu Mar 26 17:21:40 2020, Ragan, General, Stochastic cooling
|
1) From SIS, 206Pb67+ @401.17 MeV/u goes to FRS where only SEETRAM is placed in the target area to strip off 206Pb67+ to get 206Pb81+.
2) There is 206Pb81+ (H-like primary beam) inside ESR at 400 MeV/u.
3) The ESR team is now trying Stochastic cooling with 206Pb81+ beam at 400 MeV/u. |
Fri Mar 27 13:02:07 2020, Ragan, General, Stochastic cooling
|
1) ESR team is successful with the Stochstic cooling of primary H-like 206Pb81+ beam @400 MeV/u.
2) Now, they are trying for stacking of the beam. |
Fri Mar 27 13:04:17 2020, Ragan, General, FRS Settings until now
|
Yuri and Helmut have been extensively involved in tuning and optimizing of the FRS.
26th March, 2020 (Evening setting):
|