 Mon Mar 30 08:56:04 2020, Tino, Runs, Second measurement with 206Pb81+ beam at I_cooler = 10 mA
|
I_cooler = 10 mA
beam: 206Pb81+
|
|
Mon Mar 30 09:26:37 2020, Tino, Runs, Stopped Second measurement with 206Pb81+ beam at I_cooler = 10 mA
|
Stopped Data recording for Restart of the measurement
I_cooler = 10 mA
|
|
Mon Mar 30 09:34:02 2020, Tino, Runs, Restart of second measurement with 206Pb81+ beam at I_cooler = 10 mA
|
Stopped Data recording for Restart of the measurement
I_cooler = 10 mA
|
|
Mon Mar 30 10:01:31 2020, Tino, Runs, Second measurement with 206Pb81+ beam at I_cooler = 10 mA
|
I_cooler = 10 mA
|
|
Mon Mar 30 10:32:01 2020, Tino, Runs, Second measurement with 206Pb81+ beam at I_cooler = 10 mA
|
I_cooler = 10 mA
|
|
Mon Mar 30 10:57:43 2020, Tino, Runs, Second measurement with 206Pb81+ beam at I_cooler = 10 mA
|
I_cooler = 10 mA
|
Mon Mar 30 12:12:25 2020, ruijiu, General, Instruction of NTCAP for shift person 
|
To start a new run with NTCap, we need to retart NTCAP.
1. Stop labview program.
2. Start labview program and start a new run. |
|
Mon Mar 30 12:16:04 2020, Tino, Runs, Second measurement with 206Pb81+ beam at I_cooler = 10 mA
|
I_cooler = 10 mA
|
|
Mon Mar 30 12:33:04 2020, Tino, Runs, Second measurement with 206Pb81+ beam at I_cooler = 10 mA
|
I_cooler = 10 mA
|
|
Mon Mar 30 13:02:49 2020, Tino, Runs, Second measurement with 206Pb81+ beam at I_cooler = 10 mA
|
I_cooler = 10 mA
|
|
Mon Mar 30 13:31:58 2020, Tino, Runs, Second measurement with 206Pb81+ beam at I_cooler = 10 mA
|
I_cooler = 10 mA
|
|
Mon Mar 30 13:40:57 2020, ruijiu, Detectors, HV of Inner detector
|
| |
|
Mon Mar 30 13:41:20 2020, ruijiu, Detectors, HV of Inner detector
|
| |
|
Mon Mar 30 14:02:41 2020, Tino, Runs, Second measurement with 206Pb81+ beam at I_cooler = 10 mA
|
I_cooler = 10 mA
|
|
Mon Mar 30 14:24:46 2020, ruijiu, DAQ, stop taking data.
|
1. stop run0272.lmd.
2. stop NTCAP.
NTCAp file:
|
|
Mon Mar 30 14:48:02 2020, ruijiu and Tino, Detectors, The leakcurrent of SiPad is over the setting limit.
|
Because the
leakcurrent of
6 Sipads is
|
|
Mon Mar 30 15:03:58 2020, ruijiu Tino, Yuri, Lasoro, Nik and Uli, Detectors, the gas bottle is empty.
|
The gas bottle was empty. Tino replaced
the previous old bottle with 50 bar gas left.
|
|
Mon Mar 30 16:25:05 2020, ruijiu, Detectors, turn down the HV
|
turn down the hv and pull out the detector.
suggest by
|
|
Mon Mar 30 16:37:53 2020, ruijiu, Analysis,
|
| |
|
Mon Mar 30 20:51:06 2020, Ragan, Detectors, Bias Voltage for Si-pads
|
The limit of the leakage current for all Si pads was increased from 1500 nA to 5000nA and
leakage current was recorded for different Bias Voltages (32V, 35V, 40V, 45V, 50V, 55V
and 60V).
|