Sun May 30 14:40:55 2021, Jan, Sophia, Detectors, real detector assignment, 2021
|
************************************
GEM1800 @ 90deg (xray1)
GLP2000 @ 35deg (xray2)
|
Sun May 30 14:48:09 2021, Jan, Sophia, Calibration, run0215 - crap, 2021
|
|
Mon May 31 10:08:42 2021, Jan, Sophia, Runs, E127b runsheet, 2021
|
|
Mon May 31 14:38:33 2021, Sophia, Calibration, Runlist for X-ray detector calibrations after the experiment, 2021
|
The by Jacobus Swartz created table in entry 335 extended by the calibration after the experiment. |
Wed Jun 2 09:14:04 2021, Jan, General, Telegram Chat Export, 2021
|
Attached is the exported Telegram chat.
There is the simple PDF and the zip-file containing the chat in json-format as well as all media files. |
Tue Jun 8 15:06:17 2021, Shahab, Analysis, Beam lifetime, 2021
|
measured beam lifetime after the second deceleration using parallel plate Schottky detector and the RSA5103 spectrum analyser. Analysis code can be found
here:
|
Wed Jun 23 12:29:35 2021, Jan, Sophia, Calibration, Efficiency of the x-ray Detectors , 2021
|
For the x-ray detectors, efficiencies have been measured, before and after the experiment was performed.
The preliminary results of the determined efficiencies can be seen in the attached plots |
Thu Jun 24 09:43:01 2021, Jan Glorius, DAQ, Unpacker, 2021
|
The unpacker used for the production runs of E127b is located at
/u/litv-exp/unpacker/unpackexps/e127_TO_2021_with_ECL
|
Thu Jul 8 13:39:34 2021, Jan, Calibration, Electron cooler parameters, 2021
|
Below are the results from the e-cooler voltage offset measurments done by Regina Hess et al. using the voltage divider (VD).
--7 MeV--
|
Thu Jul 8 14:07:19 2021, Jan, Calibration, beam energies, 2021
|
Table of ion energies calculated from cooler parameters
[TABLE border="1"]
|
Wed Jul 14 14:46:05 2021, Jan, Sophia, Detectors, collimator geometry, 2021 10x
|
We have measured the collimator geometry. The annotations of the variables can be found in the attached sketch
[TABLE border="1"]
|
Wed Oct 13 15:09:04 2021, Jan, Collaboration, K-REC cross sections A. Surzhykov, 2021
|
Attached are the theory K-REC cross sections as calculated by Andrey Surzhykov (August 2021).
They are done for 118Te52+ on H2 at 7.049 and 6.042 MeV/u as well as for 124Xe54+ on H2 at 7.049 MeV/u.
|
Wed Oct 13 15:15:53 2021, Jan, DAQ, root-file header for analysis, 2021
|
Attached is the header file needed for root analysis. |
Mon Mar 23 08:04:07 2020, Shahab, Laszlo,Yury, Runs, run entry - run094, 2020
|
open file : run094
beam: 124Xe54+
|
Fri Jun 5 14:06:15 2020, Laszlo, Detectors, DSSSD and SCRAPER position estimate for Xe and Te experiments, 2020
|
We don't know the exact absolute positions of the detector (+scraper) and the beam. However, what we have to know is only these two relative positions respect
to each other. To get this distance I use two methods:
1, combining the infos from the set position during the beamtime + the measured pg peak position on the detector. The pg peak position is defined only |
Thu Sep 13 11:42:33 2018, Jan Glorius, Collaboration, Proposal,
|
Attached is the beam time proposal submitted and accepted by the G-PAC in 2017. |
Thu Jan 17 08:45:43 2019, Jan, Detectors, Micron W1 DSSSD - technical information, 6x
|
Attached are the spec sheets and design drawings of the new DSSSDs from Micron.
Additionally, the 3D model made by Laszlo is also attached as stp and dwg. |
Wed Feb 6 10:04:23 2019, Laszlo Varga, Simulations, Background subtraction for 124Xe, 109In, 73As made by MOCADI,
|
General remarks to the MOCADI simulations:
scraper size vertically > (p,g) spot at the scraping position --> (p,g) can be separated
by truncating the
backscattered Rutherford events in the energy.
replacing the atomic masses to nuclear masses does not change significantly the absolute positions of the
(p,g) and the Rutherford. |
Wed Feb 6 10:16:09 2019, Laszlo Varga, General, Study on scraping,
|
A publication on scraping systems suggested by Siegbert.
In the study they have used cylindrical "high-quality" slits. "High-quality" stands for well polished surface
with surface roughness <50nm. The material of the slit is Tungsten Carbide. |
Fri Apr 5 05:46:20 2019, Jan, DAQ, running DRASI for (p,g),
|
We now have a drasi DAQ running for our (p,g) experiments.
The RIO we have it installed right now is: r4l-58
It shall be used with the user <litv-exp>
|