| ID |
Date |
Author |
Category |
Subject |
|
151
|
Sat Apr 4 19:55:37 2020 |
Ragan, Alex, Esther | Runs | Failed measurement...Ten hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
FAILED - measurement was stopped by sudden loss of the beam
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 10 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 19:02, run0343.lmd
file running: 0347.lmd
_______________________________________________________________________________
time when accumulation starts: 19:17
time when storage starts: 19:55
time when storage ends: 05:55
I_cooler during storage time: -1 mA
I_cooler = 177 mA
I_SIS: 1.8e9
ESR particles after stacking: 2.5e6 (offset 3e5)
Number of stackings: 100
Target ON density: xxe12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 5 mins
(i.e. time for which electron cooler is on after gas jet)
I_ESR (20:30) : 2.25e6
I_ESR (21:00) : 2.1e6
I_ESR (21:30) : 2.0e6
I_ESR (22:00) : 1.8e6
NTCAp file:
SC_2020-04-04_19-04-52
\IQ_2020-04-04_19-04-52
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement |
| Attachment 1: 2020-04-04_19-54-47-760.png
|
|
| Attachment 2: 2020-04-04_20-02-26-363.png
|
|
|
153
|
Sat Apr 4 23:44:22 2020 |
Ragan, RuiJiu, Laszlo | Runs | Ten hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 10 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 19:02, run0343.lmd
file running: 0366.lmd
_______________________________________________________________________________
time when accumulation starts: 22:43
time when storage starts: 23:23
time when storage ends: 09:23
I_cooler during storage time: -1 mA
I_cooler = mA
I_SIS: 1.8e9
ESR particles after stacking: 2.2e6 (offset 5e5)
Number of stackings: 100
Target ON density: 4.24e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 6 mins
(i.e. time for which electron cooler is on after gas jet)
I_ESR (00:06) : 1,98e6
I_ESR (00:30) : 1.95e6
I_ESR (01:00) : 1.8e6
I_ESR (01:30) : 1.65e6
I_ESR (02:00) : 1.55e6
I_ESR (02:30) : 1.45e6
I_ESR (03:00) : 1.36e6
I_ESR (03:30) : 1.3e6
I_ESR (04:00) : 1.18e6
I_ESR (04:41) : 1.15e6
I_ESR (05:00) : 1.07e6
I_ESR (05:30) : 1e6
I_ESR (06:00) : 9.5e5
I_ESR (06:30) : 9.1e5
I_ESR (07:00) : 8.5e5
I_ESR (07:30) : -
I_ESR (08:00) : -
I_ESR (08:37) : 7e5
I_ESR (09:00) : 7.06e5
NTCAp file:
SC_2020-04-04_19-04-52
\IQ_2020-04-04_19-04-52
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement |
| Attachment 1: 2020-04-04_23-43-29-909.png
|
|
| Attachment 2: 2020-04-05_09-41-00-904_10.png
|
|
| Attachment 3: 6275225E-0E05-42AF-9F64-F666263D89B8.jpeg
|
|
| Attachment 4: A12CCF1C-16DC-4869-A54C-ED812E921E3C.jpeg
|
|
| Attachment 5: C075E863-D102-41EE-A8CF-62220D949F4A.jpeg
|
|
|
154
|
Sun Apr 5 10:21:54 2020 |
Shahab | Runs | 10 hour measurement pictures |
Schottky pictures from the 10 hour measurement gas target, including the time before gas target. |
| Attachment 1: 2020-04-05-10h-aftergasjet2.PNG
|
|
| Attachment 2: 2020-04-05-10h-aftergasjet.PNG
|
|
| Attachment 3: 205Tl_gasjet_view3.PNG
|
|
|
155
|
Sun Apr 5 10:31:08 2020 |
Ragan, Shahab | Runs | Two hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 19:02, run0343.lmd
file running: 0466.lmd
_______________________________________________________________________________
time when accumulation starts: 09:52
time when storage starts: 10:30
time when storage ends: 12:30
I_cooler during storage time: -1 mA
I_cooler = -1 mA (20 mA)
I_SIS: 1.8e9
ESR particles after stacking: 2.2e6 (offset 5e5)
Number of stackings: 100
Target ON density: 4.16e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 3 mins
(i.e. time for which electron cooler is on after gas jet)
I_ESR (11:30) : 1.8e6
I_ESR (12:00) :
I_ESR (12:10) : 1.7e6
I_ESR (12:30) : 1.62e6
NTCAp file:
SC_2020-04-04_19-04-52
\IQ_2020-04-04_19-04-52
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement |
| Attachment 1: 2020-04-05_10-30-25-440.png
|
|
| Attachment 2: 2020-04-05_10-51-22-398.png
|
|
| Attachment 3: 2020-04-05_12-44-55-857.png
|
|
| Attachment 4: 93A21749-0099-4D69-8D40-32D8EC02342C.jpeg
|
|
| Attachment 5: FC9B44C4-D9C7-48B0-98DA-132A6CEF3596.jpeg
|
|
|
156
|
Sun Apr 5 12:48:58 2020 |
Shahab | Runs | 2hour measurement parent pictures |
|
| Attachment 1: gas_jet_mother_245.PNG
|
|
| Attachment 2: gas_jet_mother_410.png
|
|
| Attachment 3: IBS_245MHz_all_ions_1D.PNG
|
|
| Attachment 4: IBS_245MHz_all_ions.PNG
|
|
| Attachment 5: IBS_245MHz_zoom_ions_1D_wo_marker.PNG
|
|
| Attachment 6: IBS_245MHz_zoom_ions_1D.PNG
|
|
|
157
|
Sun Apr 5 13:05:43 2020 |
Ragan, Shahab | Runs | Zero measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 19:02, run0343.lmd
file running: 0511.lmd
_______________________________________________________________________________
time when accumulation starts: 12:59
storage time at Manipulation 9 starts at: 13:
storage time at Manipulation 9 stops at: 14:
I cooler during storage at Manipulation 9: -1 mA (20 mA)
time spend at manipulation 13 : 5 mins
(i.e. time for which electron cooler is on after gas jet)
I_cooler = -1 mA (20 mA)
I_SIS: 1.8e9
ESR particles after stacking: e6 (offset 5e5)
Number of stackings: 100
Target ON density at SC 7 E 07: 4.11e12
Target on time for measurement: 10 mins (by event mode)
Target ON density at SC 12 E 12: 4.11e12
Target on time for measurement: 5 sec (by event mode)
NTCAp file:
SC_2020-04-04_19-04-52
\IQ_2020-04-04_19-04-52
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement |
| Attachment 1: 2020-04-05_13-04-08-686.png
|
|
| Attachment 2: 22A1BDA0-CAC3-4CB3-951E-F99ACD9CAED6.jpeg
|
|
| Attachment 3: 2020-04-05_13-58-21-916.png
|
|
| Attachment 4: CC28F701-F809-4100-982D-25E67770CAA7.jpeg
|
|
|
158
|
Sun Apr 5 15:28:35 2020 |
Ragan, Alex, Esther | Runs | Four hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 4 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 19:02, run0343.lmd
file running: 0539.lmd
_______________________________________________________________________________
time when accumulation starts: 15:27
time when storage starts: 16:05
time when storage ends: 20:05
I_cooler during storage time: -1 mA
I_cooler = -1 mA (20 mA)
I_SIS: 2e9
ESR particles after stacking: 2e6 (offset 5e5)
Number of stackings: 100
Target ON density: 3.92e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 5 mins
(i.e. time for which electron cooler is on after gas jet)
I_ESR (16:30) : 1.9e6
I_ESR (17:00) : 1.75e6
I_ESR (17:30) : 1.6e6
I_ESR (18:00) : 1.55e6
I_ESR (18:30) : 1.45e6
I_ESR (19:00) : 1.3e6
I_ESR (19:30) : 1.25e6
I_ESR (20:00) : 1.2e6
NTCAp file:
SC_2020-04-04_19-04-52
\IQ_2020-04-04_19-04-52
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement/ |
| Attachment 1: 2020-04-05_15-27-32-971.png
|
|
| Attachment 2: A2DFA8C1-D623-42FA-BBD5-1F75F51D51DD.jpeg
|
|
| Attachment 3: 2020-04-05_16-23-38-007.png
|
|
| Attachment 4: B17A216F-15D8-48F2-9403-37C8236A38C0.jpeg
|
|
| Attachment 5: 87D9890E-AC6D-4E3F-B45B-FED6A301253B.jpeg
|
|
| Attachment 6: 2020-04-05_20-16-54-054.png
|
|
| Attachment 7: 43239EE6-100B-4540-894C-B98E659BE472.jpeg
|
|
|
159
|
Sun Apr 5 20:23:02 2020 |
Ragan, Alex, Esther | Runs | Half-hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0.5 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 20:21, run0540.lmd
file running: 0540.lmd
_______________________________________________________________________________
time when accumulation starts: 20:21
time when storage starts: 20:59
time when storage ends: 21:29
I_cooler during storage time: -1 mA
I_cooler = 179 mA (20 mA)
I_SIS: 2e9
ESR particles after stacking: 2.2e6 (offset 2.5e5)
Number of stackings: 100
Target ON density: 4.14e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 5 mins
(i.e. time for which electron cooler is on after gas jet)
NTCAp file:
SC_2020-04-04_19-04-52
\IQ_2020-04-04_19-04-52
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement/ |
| Attachment 1: 2B066703-2B92-4FBD-94F0-01C50424A7DB.MOV
|
| Attachment 2: 2020-04-05_21-00-05-018.png
|
|
| Attachment 3: 57175364-4FA3-4C56-8DC0-D4E1FE3BFFA9.jpeg
|
|
| Attachment 4: 523688CD-02EB-4A57-ADFC-77122CD205F5.MOV
|
| Attachment 5: E55589A9-3C71-4CF6-ACAB-63FD23B00BE3.jpeg
|
|
| Attachment 6: 2020-04-05_21-42-32-717.png
|
|
| Attachment 7: 39A3C392-8E7D-44A3-8564-29AC89A4CC7C.jpeg
|
|
|
160
|
Sun Apr 5 21:50:02 2020 |
Ragan, Alex, Esther | Runs | Half-hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0.5 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 20:21, run0540.lmd
file running: 0546.lmd
_______________________________________________________________________________
time when accumulation starts: 21:43
time when storage starts: 22:21
time when storage ends: 22:51
I_cooler during storage time: -1 mA
I_cooler = 179 mA (20 mA)
I_SIS: 1.75e9
ESR particles after stacking: 2.2e6 (offset 3e5)
Number of stackings: ~90 (was set to 100 but ~10 were missed)
Target ON density: 4.2e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 3 mins
(i.e. time for which electron cooler is on after gas jet)
NTCAp file:
SC_2020-04-04_19-04-52
\IQ_2020-04-04_19-04-52
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement/ |
| Attachment 1: 2020-04-05_22-21-44-967.png
|
|
| Attachment 2: 8F69C30E-2A79-405C-85D2-CFA061720E14.jpeg
|
|
| Attachment 3: 922E0C48-BC5F-4B8B-B35F-F7E2E823CFB2.MOV
|
| Attachment 4: 76898BAD-3A48-4E8F-A830-BA0F158C9DB8.MOV
|
| Attachment 5: AEB662B9-D22B-4213-9D4F-1F723404DF2C.jpeg
|
|
| Attachment 6: B601FDD9-8CA7-4DD0-A17B-678C44EDBDD9.jpeg
|
|
| Attachment 7: 2020-04-05_23-04-35-616.png
|
|
|
161
|
Sun Apr 5 23:28:01 2020 |
Ragan, Alex, Esther | Runs | One-hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 1 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 20:21, run0540.lmd
file running: 0549.lmd
_______________________________________________________________________________
time when accumulation starts: 23:04
time when storage starts: 23:42
time when storage ends: 00:42
I_cooler during storage time: -2 mA (20 mA)
I_cooler = 180 mA
I_SIS: 1.8e9
ESR particles after stacking: 2.2e6 (offset 3e5)
Number of stackings: 100
Target ON density: 4.24e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 3 mins
(i.e. time for which electron cooler is on after gas jet)
NTCAp file:
SC_2020-04-04_19-04-52
\IQ_2020-04-04_19-04-52
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement/ |
| Attachment 1: 2020-04-05_23-42-50-224.png
|
|
| Attachment 2: 2020-04-06_00-56-01-052.png
|
|
| Attachment 3: 0A9DA63C-7DBD-42B3-9CE9-08E9785B33B2.jpeg
|
|
| Attachment 4: C885A387-78BB-49BF-AD5C-D7FEAB8248DE.jpeg
|
|
| Attachment 5: 7487031D-7B12-4ACF-B0C8-55D5B928C0CE.jpeg
|
|
| Attachment 6: 3EE56236-447E-4EAE-8394-B1F05BC9D1C7.jpeg
|
|
| Attachment 7: D809F5FB-214D-486B-A4F0-912FD2C0CB94.MOV
|
|
162
|
Mon Apr 6 01:02:00 2020 |
Ragan, Laszlo, Nikos | Runs | Three hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 3 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 20:21, run0540.lmd
file running: 0555.lmd
_______________________________________________________________________________
time when accumulation starts: 00:57
time when storage starts: 01:35
time when storage ends: 04:35
I_cooler during storage time: -1 mA (20 mA)
I_cooler = 179 mA
I_SIS: 1.8e9
ESR particles after stacking: 2.4e6 (offset 3e5)
Number of stackings: 100
Target ON density: 4.3e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 5mins
(i.e. time for which electron cooler is on after gas jet)
2:00 I_ESR = 2.25e6
2:30 I_ESR = 2.04e6
3:00 I_ESR = 1.96e6
3:30 I_ESR = 1.87e6
4:00 I_ESR = 1.74e6
4:30 I_ESR = 1.56e6
NTCAp file:
SC_2020-04-06_00-59-46
\IQ_2020-04-06_00-59-38
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement/ |
| Attachment 1: 2020-04-06_01-35-14-616.png
|
|
| Attachment 2: 53653F35-D538-40F7-A65F-D34521D7DCD7.jpeg
|
|
| Attachment 3: 127B7296-64E4-4E66-9A82-4A113EA3E6EC.MOV
|
| Attachment 4: 2059E4BB-8CAE-4119-8991-524E1C5260B8.jpeg
|
|
| Attachment 5: 9967BFDE-0DDB-4AEC-ABA6-C0944BF16886.jpeg
|
|
| Attachment 6: A52DA0F4-C0B7-49B4-B4B2-5853749FD6E4.jpeg
|
|
| Attachment 7: B4F6048A-242D-4742-8162-5546431836F1.jpeg
|
|
| Attachment 8: 2493C876-0DD7-4069-A3D1-C3CE569B5C09.jpeg
|
|
| Attachment 9: 2020-04-06_04-50-53-025.png
|
|
|
163
|
Mon Apr 6 05:28:55 2020 |
Ragan, Laszlo, Nikos | Runs | Zero hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 20:21, run0540.lmd
file running: 0555.lmd
_______________________________________________________________________________
time when accumulation starts: 04:51
time when storage starts: 05:28
time when storage ends: 05:28
I_cooler during storage time: -1 mA (20 mA)
I_cooler = 179 mA
I_SIS: 1.75e9
ESR particles after stacking: 2.2e6 (offset 5e5)
Number of stackings: 100
Target ON density: 4.45e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 2mins
(i.e. time for which electron cooler is on after gas jet)
NTCAp file:
SC_2020-04-06_00-59-46
\IQ_2020-04-06_00-59-38
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement/ |
| Attachment 1: 46C168E2-D1D5-4CD3-B87F-7F82D045D527.jpeg
|
|
| Attachment 2: C55A1803-E814-412F-B3DC-40FE24946F8A.MOV
|
| Attachment 3: 75662B09-68EE-49FD-9BB2-71766305ECF8.jpeg
|
|
| Attachment 4: 1C0040AA-3CE4-4019-B85E-0049EBE85384.jpeg
|
|
| Attachment 5: 2020-04-06_05-40-47-352.png
|
|
|
164
|
Mon Apr 6 05:43:50 2020 |
Ragan, Laszlo, Nikos | Runs | One and a half hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 1.5 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 20:21, run0540.lmd
file running: 0558.lmd
_______________________________________________________________________________
time when accumulation starts: 05:41
time when storage starts: 06:19
time when storage ends: 07:49
I_cooler during storage time: -1 mA (20 mA)
I_cooler = 179 mA
I_SIS: 1.75e9
ESR particles after stacking: 2.3e6 (offset 5e5)
Number of stackings: 100
Target ON density: 4.36e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 3 mins
(i.e. time for which electron cooler is on after gas jet)
NTCAp file:
SC_2020-04-06_00-59-46
\IQ_2020-04-06_00-59-38
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement/ |
| Attachment 1: 2020-04-06_06-18-59-809.png
|
|
| Attachment 2: 946073FA-3077-4CBF-900B-565BD19CF040.jpeg
|
|
| Attachment 3: 10FEB6AE-653B-4803-9927-EEB5BF33D3ED.jpeg
|
|
| Attachment 4: 2020-04-06_08-03-40-493.png
|
|
|
165
|
Mon Apr 6 08:37:02 2020 |
Ragan, Shahab, Pierre-Michel | Runs | 10 hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 10 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 20:21, run0540.lmd
file running: 0558.lmd
_______________________________________________________________________________
time when accumulation starts: 08:21
time when storage starts: 09:27
time when storage ends: 19:27
I_cooler during storage time: -1 mA (20 mA)
I_cooler = 180 mA
I_SIS: 1.8e9
ESR particles after stacking: 3.1e6 (offset 4e5)
Number of stackings: 200
Target ON density: 4.15e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 10 mins
(i.e. time for which electron cooler is on after gas jet)
I_ESR (10:34): 2.78e6
I_ESR (11:07): 2.53e6
I_ESR (12:07): 2.2e6
I_ESR (13:43): 1.7e6
I_ESR (14:00): 1.6E6
I_ESR (14:43): 1.5e6
I_ESR (15:24): 1.43e6
I_ESR (16:19): 1.3e6
I_ESR (17:03): I.IIIeVI
I_ESR (18:20): 1.15e6 (frozen screen)
I_ESR (18:50): 9.5e5
I_ESR (19:27): 8.5e5
NTCAp file:
SC_2020-04-06_00-59-46
\IQ_2020-04-06_00-59-38
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement/ |
| Attachment 1: 2020-04-06_09-26-46-084.png
|
|
| Attachment 2: 2020-04-06_09-27-05-494.png
|
|
| Attachment 3: 2020-04-06_09-28-55-435.png
|
|
| Attachment 4: 966F359F-1BC2-4923-8A7A-4067312EC945.jpeg
|
|
| Attachment 5: 3A858F59-3AC9-41B2-8804-0672BFF50554.jpeg
|
|
| Attachment 6: 1CE8A342-C798-4B86-B175-228F841C1650.jpeg
|
|
| Attachment 7: ECAA6801-6590-4155-88FB-90EAE304358D.jpeg
|
|
| Attachment 8: 2020-04-06_19-51-23-878.png
|
|
|
166
|
Mon Apr 6 09:34:58 2020 |
Shahab | Runs | Pictures from one and a half hour measurement |
cheers! |
| Attachment 1: wideband_rec_001.PNG
|
|
|
167
|
Mon Apr 6 14:17:54 2020 |
Yuri, Shahab | Runs | FRS valves |
We saw reduction in ESR beam life. It turned out that FRS has opened valves and venting caused us reduction of the quality of vacuum in ESR leading to beam loss. We manged to closed GEE5VV so that now beam is stable somehow.
how could you guys!!!!
arrrrgggggggg!!!!!!! |
| Attachment 1: 2020-04-06_14-22-20-965.png
|
|
|
168
|
Mon Apr 6 14:57:04 2020 |
Shahab | Runs | cooler down |
cooler component GECEBG2T again had to be reset. |
|
4
|
Fri Dec 7 10:56:04 2018 |
Jan Glorius | SlowControl | EPICS ioc on raspberry |
We have an EPCIS server (ioc) running on our raspberry (ext-027377). It talks to our MesyTec modules (MSCF shapers, MHV4 high-voltages).
In principal it should be running all the time, but here is the manual how to check/start it:
-login on GSI-linux using <litv-exp> user
-type in console: e121pi (alias for: 'ssh -X litv-exp@ext-027377.gsi.de')
-open the "mrcc" screen session: screen -x mrcc
-if the ioc is running you will see here terminal outputs like:
| Quote: | cbLow: Active ringpi:mrcc:mhv2:getRcStatus
cbLow: Active ringpi:mrcc:mhv2:getCurrent1 |
-if this is not the case, you have to restart the ioc:
- <Ctrl>+c to end any running ioc (if it has errors)
- the command to start the ioc: e121_ioc (alias for '/home/litv-exp/epics/mrcc_ioc/bin/linux-arm/mrcc /home/litv-exp/epics/mrcc_ioc/iocBoot/iocmrcc/start_ringpi.cmd')
- now the terminal outputs should be as quoted above (errors show up in red)
- finally <Ctrl>+a d to exit the screen session |
|
5
|
Fri Dec 7 11:39:41 2018 |
Jan Glorius | SlowControl | GUI for remote control of MSCF+MHV4 |
We have a GUI for remote controlling our MesyTec modules MSCF16 and MHV4 for E121 experiment.
Here is the instructions to run it:
1. login to GSI-linux using <litv-exp> user
2. get the EPICS environment by typing in terminal: epicsfind
3. type in terminal: GUIe121 (alias for 'medm -x /u/litv-exp/E121/medm/e121.adl')
if you get the message: 'medm: command not found' you didn't load the EPICS environment (2.)
The GUI is more or less self-explaining.
Be sure to follow this procedure when changing a value (e.g. threshold for MSCF):
1. click on small text-panel with value
2. leave mouse pointer inside panel
3. change value by typing
4. press enter |
|
8
|
Tue May 7 15:52:47 2019 |
Chen, Sidhu | SlowControl | GUI for remote control of MSCF+MHV4 [detailed] |
We have a GUI for remote controlling our MesyTec modules MSCF16 and MHV4 for E121 experiment.
Here is the instructions to run it:
1. login to GSI-linux using <litv-exp> user
litv-exp@astrum1:~$ ssh -X litv-exp@lxg1254.gsi.de
2. get the EPICS environment by typing in terminal: epicsfind
litv-exp@lxg1254:~$ epicsfind
Found nice EPICS in /u/litv-exp/epics/opt_x86_64-linux-gnu_4.9.2.
3. type in terminal: GUIe121 (alias for 'medm -x /u/litv-exp/E121/medm/e121.adl')
litv-exp@lxg1254:~$ GUIe121
if you get the message: 'medm: command not found' you didn't load the EPICS environment (1.)
The GUI is more or less self-explaining.
Be sure to follow this procedure when changing a value (e.g. threshold for MSCF):
1. click on small text-panel with value
2. leave mouse pointer inside panel
3. change value by typing
4. press enter |