ID |
Date |
Author |
Category |
Subject |
85
|
Mon Mar 30 09:26:37 2020 |
Tino | Runs | Stopped Second measurement with 206Pb81+ beam at I_cooler = 10 mA |
Stopped Data recording for Restart of the measurement
I_cooler = 10 mA
beam: 206Pb81+
energy: 400 MeV/u
purpose: data for the measurement of half life of 206Pb81+ due to its interaction with electron cooler and residual gas
Detector position (CsISiPHOS): 60 mm
Detector position (MWPC): -10 mm
run start at 08:52 , run file: run0271.lmd
_______________________________________________________________________________
time: 09:27
I_cooler = -01 mA
SIS particles: 3.4E8
ESR particles: 2.5E5
NTCAp file:
SC_2020-03-30_08-54-42
IQ_2020-03-30_08-54-42
(saved in drive: p)
copy and repeat the above (below the line) every 30 minutes |
35
|
Sat Mar 28 13:19:56 2020 |
Ragan | Runs | Template |
beam:
energy:
storage time:
purpose: data with TARGET ON
Detector position (CsISiPHOS): mm
Detector position (MWPC): mm
run start at xx:xx , first file: run0xxx.lmd
run stop at xx:xx , last file: run0xxx.lmd
_______________________________________________________________________________
time:
I_cooler = mA
HV1
CH1 voltage: 60V
CH1 leakage current: uA
CH2 voltage: 60V
CH2 leakage current: uA
CH3 voltage: 60V
CH3 leakage current: uA
CH4 voltage: 60V
CH4 leakage current: uA
HV2
CH1 voltage: 60V
CH1 leakage current: uA
CH2 voltage: 60V
CH2 leakage current: uA
CH3 voltage: -50V
CH3 leakage current: uA
CH4 voltage: -160V
CH4 leakage current: uA
SIS particles before:
ESR particles after stacking:
Number of stackings:
Target ON density:
Target on time for measurement:
NTCAp file:
IQ_2020-03-27_21-02-31/0000xxx.iq.tdms
SC_2020-03-27_21-02-31/0000xxx.iq.tdms
copy and repeat the above (below the line) every 30 minutes |
117
|
Thu Apr 2 06:25:13 2020 |
Ragan | Runs | Template |
beam: 205Tl81+ (no scraping)
energy: 400 MeV/u
storage time: ___ hrs
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): mm
run start at ___ , first file: run____.lmd
file running: ____.lmd
_______________________________________________________________________________
time when accumulation starts: __:__
time when storage starts: __:__
time when storage ends: __:__
I_cooler during storage time: __ mA
I_cooler = __ mA
I_SIS: ___
ESR particles after stacking: ___
Number of stackings: __
Target ON density: _____
Target on time: __:__
Target off time: __:__
Target on time for measurement: 10 mins (by local mode)
NTCAp file:
SC_2020-04-01______________
\IQ_2020-04-01_____________
IQ rate: 8 MS/s
(saved in drive : __)
copy and repeat the above (below the line) for every storage time measurement |
57
|
Sun Mar 29 20:32:20 2020 |
Ragan | General | Template for Pb halflive measurement |
beam:
energy:
purpose: data with electron cooler current xx mA
Detector position (CsISiPHOS): mm
Detector position (MWPC): mm
run start at xx:xx , first file: run0xxx.lmd
run stop at xx:xx , last file: run0xxx.lmd
_______________________________________________________________________________
time:
I_cooler = mA
HV1
CH1 voltage: V
CH1 leakage current: uA
CH2 voltage: V
CH2 leakage current: uA
CH3 voltage: V
CH3 leakage current: uA
CH4 voltage: V
CH4 leakage current: uA
HV2
CH1 voltage: V
CH1 leakage current: uA
CH2 voltage: V
CH2 leakage current: uA
CH3 voltage: V
CH3 leakage current: uA
CH4 voltage: V
CH4 leakage current: uA
SIS particles before:
ESR particles at injection:
ESR particles after stacking:
Target ON density:
NTCAp file:
IQ_2020-03-27_21-02-31/0000xxx.iq.tdms
SC_2020-03-27_21-02-31/0000xxx.iq.tdms
copy and repeat the above (below the line) every 30 minutes |
153
|
Sat Apr 4 23:44:22 2020 |
Ragan, RuiJiu, Laszlo | Runs | Ten hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 10 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 19:02, run0343.lmd
file running: 0366.lmd
_______________________________________________________________________________
time when accumulation starts: 22:43
time when storage starts: 23:23
time when storage ends: 09:23
I_cooler during storage time: -1 mA
I_cooler = mA
I_SIS: 1.8e9
ESR particles after stacking: 2.2e6 (offset 5e5)
Number of stackings: 100
Target ON density: 4.24e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 6 mins
(i.e. time for which electron cooler is on after gas jet)
I_ESR (00:06) : 1,98e6
I_ESR (00:30) : 1.95e6
I_ESR (01:00) : 1.8e6
I_ESR (01:30) : 1.65e6
I_ESR (02:00) : 1.55e6
I_ESR (02:30) : 1.45e6
I_ESR (03:00) : 1.36e6
I_ESR (03:30) : 1.3e6
I_ESR (04:00) : 1.18e6
I_ESR (04:41) : 1.15e6
I_ESR (05:00) : 1.07e6
I_ESR (05:30) : 1e6
I_ESR (06:00) : 9.5e5
I_ESR (06:30) : 9.1e5
I_ESR (07:00) : 8.5e5
I_ESR (07:30) : -
I_ESR (08:00) : -
I_ESR (08:37) : 7e5
I_ESR (09:00) : 7.06e5
NTCAp file:
SC_2020-04-04_19-04-52
\IQ_2020-04-04_19-04-52
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement |
Attachment 1: 2020-04-04_23-43-29-909.png
|
|
Attachment 2: 2020-04-05_09-41-00-904_10.png
|
|
Attachment 3: 6275225E-0E05-42AF-9F64-F666263D89B8.jpeg
|
|
Attachment 4: A12CCF1C-16DC-4869-A54C-ED812E921E3C.jpeg
|
|
Attachment 5: C075E863-D102-41EE-A8CF-62220D949F4A.jpeg
|
|
6
|
Mon Dec 10 11:59:15 2018 |
Chen, Sidhu | Detectors | Test of shaping amplifier. |
|
2
|
Mon Dec 3 15:06:04 2018 |
Chen, Sidhu | DAQ | Test of two preamplifier. |
Description:
We have two pre-amplifiers:
New: Max. range 5GeV, Two sensitivity options: 1 GeV and 5 GeV, Decay time = 30 us, pulse input 220 MeV/u, Ser. #MPR-32-D-5000-30-1118380.
Old: Max. range 5GeV, Two sensitivity options: 1 GeV and 5 GeV, Decay time = 25 us, pulse input 220 MeV/u. Ser. #MPR-32-D-5000-25-0414310.
Conclusion:
Both pre-amplifiers work well.
The summary is attached in the followings:
|
106
|
Tue Mar 31 15:30:43 2020 |
ruijiu | Analysis | The beam position on DSSD with different conditions on on the dEE spectrum |
I analyzed the first measurement with 206Pb81+ beam, run 250-267. |
Attachment 1: 202003311453.png
|
|
Attachment 2: 202003311508.png
|
|
Attachment 3: 202003311509.png
|
|
Attachment 4: 202003311510.png
|
|
Attachment 5: 202003311511.png
|
|
Attachment 6: 202003311512.png
|
|
99
|
Mon Mar 30 14:48:02 2020 |
ruijiu and Tino | Detectors | The leakcurrent of SiPad is over the setting limit. |
Because the
leakcurrent of
6 Sipads is
over the
setting limit,
the alarm of
HV module is
sounding.
Ruijiu
increase the
limit to 1500
uA. |
Attachment 1: Screenshot_20200330-145551.jpg
|
|
Attachment 2: Screenshot_20200330-145544.jpg
|
|
Attachment 3: IMG_20200330_144915.jpg
|
|
11
|
Tue Aug 27 14:53:47 2019 |
Chen, Sidhu | Detectors | The thickness uncertainty of Ta is less than 1%. |
The thickness of Ta plate have been measured by target group. The result is show as following.
According to this measurement, the thickness uncertainty is less than 1%.
This thickness uncertainty is good enough for Tl experiment.
|
Attachment 1: 20180711ChargeParticleDetectorV8.png
|
|
Attachment 3: 2019_08-Ta-Blech.xlsx
|
162
|
Mon Apr 6 01:02:00 2020 |
Ragan, Laszlo, Nikos | Runs | Three hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 3 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 20:21, run0540.lmd
file running: 0555.lmd
_______________________________________________________________________________
time when accumulation starts: 00:57
time when storage starts: 01:35
time when storage ends: 04:35
I_cooler during storage time: -1 mA (20 mA)
I_cooler = 179 mA
I_SIS: 1.8e9
ESR particles after stacking: 2.4e6 (offset 3e5)
Number of stackings: 100
Target ON density: 4.3e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 5mins
(i.e. time for which electron cooler is on after gas jet)
2:00 I_ESR = 2.25e6
2:30 I_ESR = 2.04e6
3:00 I_ESR = 1.96e6
3:30 I_ESR = 1.87e6
4:00 I_ESR = 1.74e6
4:30 I_ESR = 1.56e6
NTCAp file:
SC_2020-04-06_00-59-46
\IQ_2020-04-06_00-59-38
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement/ |
Attachment 1: 2020-04-06_01-35-14-616.png
|
|
Attachment 2: 53653F35-D538-40F7-A65F-D34521D7DCD7.jpeg
|
|
Attachment 3: 127B7296-64E4-4E66-9A82-4A113EA3E6EC.MOV
|
Attachment 4: 2059E4BB-8CAE-4119-8991-524E1C5260B8.jpeg
|
|
Attachment 5: 9967BFDE-0DDB-4AEC-ABA6-C0944BF16886.jpeg
|
|
Attachment 6: A52DA0F4-C0B7-49B4-B4B2-5853749FD6E4.jpeg
|
|
Attachment 7: B4F6048A-242D-4742-8162-5546431836F1.jpeg
|
|
Attachment 8: 2493C876-0DD7-4069-A3D1-C3CE569B5C09.jpeg
|
|
Attachment 9: 2020-04-06_04-50-53-025.png
|
|
124
|
Thu Apr 2 21:12:39 2020 |
Ragan, Nikos, Pierre-Michel, Dima | Runs | Three hour measurement (S2: 0/35 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 3 hrs
S2: 0/35 mm
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 19:05 , first file: run0292.lmd
file running: 0295.lmd
_______________________________________________________________________________
time when accumulation starts: 20:37
time when storage starts: 20:51
time when storage ends: 23:51
I_cooler during storage time: -1 mA
I_cooler = 177 mA
I_SIS: 1.75e9
ESR particles after stacking: 2e6 (offset 1e5)
Number of stackings: 30
Target ON density: 3.48e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 5 mins
(i.e. time for which electron cooler is on after gas jet)
NTCAp file:
SC_2020-04-02_19-10-21
\IQ_2020-04-02_19-10-14
IQ rate: 8 MS/s
(saved in drive : p)
copy and repeat the above (below the line) for every storage time measurement |
Attachment 1: 46CBD7E3-0AF1-447C-847E-31BA5224684D.jpeg
|
|
Attachment 2: 7A404038-88E9-4CAF-91E3-A26A0F8A51EF.jpeg
|
|
150
|
Sat Apr 4 18:57:49 2020 |
Ragan, Alex, Esther | General | Timing problem with SIS & ESR and problems with stacking |
There are further problems with beam stacking in ESR. It works occasionally but keeps failing.
There is also timing problem between SIS and FRS. |
155
|
Sun Apr 5 10:31:08 2020 |
Ragan, Shahab | Runs | Two hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 19:02, run0343.lmd
file running: 0466.lmd
_______________________________________________________________________________
time when accumulation starts: 09:52
time when storage starts: 10:30
time when storage ends: 12:30
I_cooler during storage time: -1 mA
I_cooler = -1 mA (20 mA)
I_SIS: 1.8e9
ESR particles after stacking: 2.2e6 (offset 5e5)
Number of stackings: 100
Target ON density: 4.16e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 3 mins
(i.e. time for which electron cooler is on after gas jet)
I_ESR (11:30) : 1.8e6
I_ESR (12:00) :
I_ESR (12:10) : 1.7e6
I_ESR (12:30) : 1.62e6
NTCAp file:
SC_2020-04-04_19-04-52
\IQ_2020-04-04_19-04-52
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement |
Attachment 1: 2020-04-05_10-30-25-440.png
|
|
Attachment 2: 2020-04-05_10-51-22-398.png
|
|
Attachment 3: 2020-04-05_12-44-55-857.png
|
|
Attachment 4: 93A21749-0099-4D69-8D40-32D8EC02342C.jpeg
|
|
Attachment 5: FC9B44C4-D9C7-48B0-98DA-132A6CEF3596.jpeg
|
|
129
|
Fri Apr 3 03:59:14 2020 |
Ragan, Pierre-Michel, Dima | Runs | Two hour measurement (S2: 0/35 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 2 hr
S2: 0/35 mm
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 04:13, run0300.lmd
file running: 0300.lmd
_______________________________________________________________________________
time when accumulation starts: 04:21
time when storage starts: 04:32
time when storage ends: 06:32
I_cooler during storage time: -1 mA
I_cooler = 179 mA
I_SIS: 1.75e9
ESR particles after stacking: 2.1e6 (offset 1e5)
Number of stackings: 30
Target ON density: 3.66e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 7 mins
(i.e. time for which electron cooler is on after gas jet)
NTCAp file:
SC_2020-04-03_04-17-44
\IQ_2020-04-03_04-17-51
IQ rate: 8 MS/s
(saved in drive : p)
copy and repeat the above (below the line) for every storage time measurement |
Attachment 1: 2B409195-AF78-46AA-9B5B-F0990B564238.jpeg
|
|
Attachment 2: ED3309B6-82E5-4484-A787-ADF94FD55814.jpeg
|
|
140
|
Sat Apr 4 00:00:20 2020 |
Ragan, Laszlo, Pierre-Michel, Dima | Runs | Zero hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 22:11, run0308.lmd
file running: 0309.lmd
_______________________________________________________________________________
time when accumulation starts: 23:29
time when storage starts: 23:53
time when storage ends: 23:53
I_cooler during storage time: -1 mA
I_cooler = 176 mA
I_SIS: 1.75e9
ESR particles after stacking: 2.9e6 (offset 5e5)
Number of stackings: ~53
Target ON density: 4e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 2 mins
(i.e. time for which electron cooler is on after gas jet)
NTCAp file:
SC_2020-04-03_22-12-50
\IQ_2020-04-03_22-13-48
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement |
Attachment 1: 0453DD6F-453B-4751-96A3-D9D1CD808CD5.jpeg
|
|
Attachment 2: 99B7B973-C12E-4621-BD2B-DDF1D6753DF2.jpeg
|
|
142
|
Sat Apr 4 00:40:29 2020 |
Ragan, Pierre-Michel, Dima | Runs | Zero hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 22:11, run0308.lmd
file running: 0311.lmd
_______________________________________________________________________________
time when accumulation starts: 02:15
time when storage starts: 02:39
time when storage ends: 02:39
I_cooler during storage time: -1 mA
I_cooler = 178 mA
I_SIS: 1.75e9
ESR particles after stacking: 1.5e6 (offset 5e5)
Number of stackings: 60
Target ON density: 4e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 2 mins
(i.e. time for which electron cooler is on after gas jet)
NTCAp file:
SC_2020-04-03_22-12-50
\IQ_2020-04-03_22-13-48
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement |
Attachment 1: D6F92CFB-C5D3-4A7E-BEEC-4DB50BDA1CB5.jpeg
|
|
Attachment 2: 8DC5D5E0-C8B0-4614-A826-1692982FB75F.jpeg
|
|
Attachment 3: 67EEB2B9-5D29-45A3-BB4E-D9E466F0716E.jpeg
|
|
163
|
Mon Apr 6 05:28:55 2020 |
Ragan, Laszlo, Nikos | Runs | Zero hour measurement (S2: 0/35 mm and S6: -20/7 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
S2: 0/35 mm
s6: -20/7
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 20:21, run0540.lmd
file running: 0555.lmd
_______________________________________________________________________________
time when accumulation starts: 04:51
time when storage starts: 05:28
time when storage ends: 05:28
I_cooler during storage time: -1 mA (20 mA)
I_cooler = 179 mA
I_SIS: 1.75e9
ESR particles after stacking: 2.2e6 (offset 5e5)
Number of stackings: 100
Target ON density: 4.45e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 2mins
(i.e. time for which electron cooler is on after gas jet)
NTCAp file:
SC_2020-04-06_00-59-46
\IQ_2020-04-06_00-59-38
IQ rate: 8 MS/s
(saved in drive : O)
copy and repeat the above (below the line) for every storage time measurement/ |
Attachment 1: 46C168E2-D1D5-4CD3-B87F-7F82D045D527.jpeg
|
|
Attachment 2: C55A1803-E814-412F-B3DC-40FE24946F8A.MOV
|
Attachment 3: 75662B09-68EE-49FD-9BB2-71766305ECF8.jpeg
|
|
Attachment 4: 1C0040AA-3CE4-4019-B85E-0049EBE85384.jpeg
|
|
Attachment 5: 2020-04-06_05-40-47-352.png
|
|
127
|
Fri Apr 3 03:18:06 2020 |
Ragan, Pierre-Michel, Dima | Runs | Zero hour measurement (S2: 0/35 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
S2: 0/35 mm
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 19:05 , first file: run0292.lmd
file running: 0298.lmd
_______________________________________________________________________________
time when accumulation starts: 02:36
time when storage starts: 02:47
time when storage ends: 02:47
I_cooler during storage time: -1 mA
I_cooler = 175 mA
I_SIS: 2e9
ESR particles after stacking: 2.7e6 (offset 1e5)
Number of stackings: 30
Target ON density: 3.49e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 3 mins
(i.e. time for which electron cooler is on after gas jet)
NTCAp file:
SC_2020-04-02_19-10-21
\IQ_2020-04-02_19-10-14
IQ rate: 8 MS/s
(saved in drive : p)
copy and repeat the above (below the line) for every storage time measurement |
Attachment 1: 3C7167D2-5B67-4A2A-BB16-76DE5DCE6D7F.jpeg
|
|
136
|
Fri Apr 3 13:21:16 2020 |
Ragan, Mei, Shahab | Runs | Zero hour measurement (S2: 0/35 mm) |
beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
S2: 0/35 mm
purpose: data with TARGET ON
Detector position (CsISiPHOS): out of the ring
Detector position (MWPC): -60 mm
run start at 11:17, run0303.lmd
file running: 0304.lmd
_______________________________________________________________________________
time when accumulation starts: 12:58
time when storage starts: 13:16
time when storage ends: 13:16
I_cooler during storage time: -1 mA
I_cooler = 176 mA
I_SIS: 2e9
ESR particles after stacking: 2.4e6 (offset 5e5)
Number of stackings: 38 (was set for 60 but we missed a few)
Target ON density: 3.54e12
Target on time for measurement: 10 mins (by event mode)
time spend at manipulation 13 : 2 mins
(i.e. time for which electron cooler is on after gas jet)
NTCAp file:
SC_2020-04-03_11-20-14
\IQ_2020-04-03_11-20-05
IQ rate: 8 MS/s
(saved in drive : p)
copy and repeat the above (below the line) for every storage time measurement |
Attachment 1: 8560F317-7B65-476E-84EF-CFFB9C021878.jpeg
|
|