 Wed Mar 31 13:52:04 2021, Jan, Detectors, BaF Na22 Testing, 2021
|
On 30. and 31.03.2021 we did some testing with the 6 BaF detectors.
Trigger & threshold:
|
|
Wed Mar 31 13:57:27 2021, Jan, Detectors, BaF HV settings, 2021
|
The setting below is a start value for final gain matching with a full ADC range of 12MeV:
[TABLE border="1"]
|
Wed Apr 14 09:42:50 2021, Jan, Detectors, BaF HV gain matching, 2021 
|
The preliminary gain matching settings for a full ADC range of ~12MeV:
[TABLE border="1"]
|
|
Thu Apr 22 10:56:20 2021, Jan, Detectors, target-chamber det. distances, 2021
|
This is the lookup table for the distance of each x-ray detector to the target.
See attached foto for explanation.
|
|
Wed Apr 28 09:12:47 2021, Jan, Yuri, Detectors, UI-diagram, 2021
|
The UI-curve of the detector
U I
10 0.11
|
|
Tue May 4 14:34:51 2021, Jan Glorius, Detectors, Xray weight control induces signals, 2021
|
When the readout/control of the det. weight control via serial connection is active, there is a clear signal induced in the Xray detectors for each command
sent.
|
|
Fri May 21 11:55:24 2021, Jan, Detectors, SI MSCF settings v1, 2021
|
attached are the settings for all MSCFs.
Settings are optimized for DSSD only, not BaF! |
|
Sat May 22 17:13:48 2021, Laszlo, Detectors, Si position changed, 2021
|
| Si was moved from -25 mm to -19 mm before run 0072. |
|
Sat May 22 21:33:22 2021, Laszlo, Detectors, Xray detectors are filled at 90 and 35, 2021
|
| |
|
Wed May 26 20:34:50 2021, Ragan, Thanassis, Detectors, Detector filling, 2021
|
| Jan is filling the detector after run0137. |
|
Sun May 30 14:40:55 2021, Jan, Sophia, Detectors, real detector assignment, 2021
|
************************************
GEM1800 @ 90deg (xray1)
GLP2000 @ 35deg (xray2)
|
|
Wed Jul 14 14:46:05 2021, Jan, Sophia, Detectors, collimator geometry, 2021 10x
|
We have measured the collimator geometry. The annotations of the variables can be found in the attached sketch
[TABLE border="1"]
|
|
Fri Apr 5 05:46:20 2019, Jan, DAQ, running DRASI for (p,g),
|
We now have a drasi DAQ running for our (p,g) experiments.
The RIO we have it installed right now is: r4l-58
It shall be used with the user <litv-exp>
|
|
Fri Apr 5 06:05:55 2019, Jan, DAQ, making changes to the DAQ ,
|
If you need to add or change a module of the VME crate you need to follow this proceedure:
1. stop DRASI
|
|
Fri Jun 7 15:57:41 2019, Jan, DAQ, DAQ with & without MDPP-16,
|
The DAQ located in
../esrdaq_2018/r4l-58/
|
|
Wed Oct 23 14:51:43 2019, Jan, Laszlo, DAQ, VME modules & main.cfg,
|
Here is the current list of VME modules in our DRASI daq including HW addresses:
Slot <module> [HW addr.]
|
 Wed Oct 23 15:35:29 2019, Jan, DAQ, DAQ with & without MDPP-16,
|
the DAQ located in
../esrdaq_2018/r4l-58_dev/
|
|
Thu Jan 23 16:35:47 2020, Laszlo, DAQ, cable documentation,
|
| |
|
Fri Feb 21 09:39:40 2020, Laszlo, DAQ, cable documentation,
|
| |
|
Wed Mar 11 09:08:21 2020, Jan, DAQ, DAQ & controls - OVERVIEW,
|
For all DAQ & slow control buissines the user
[COLOR=red][SIZE=3]litv-exp[/SIZE][/COLOR]
is used with the password [SIZE=1]ViValasVegas1964[/SIZE]
|