ID |
Date |
Author |
Category |
Subject |
Text |
|
1
|
Thu Sep 13 11:32:17 2018 |
Jan Glorius | Collaboration | Proposal | Attached is the beam time proposal submitted
and accepted by the G-PAC in 2017. |
|
2
|
Mon Dec 3 15:06:04 2018 |
Chen, Sidhu | DAQ | Test of two preamplifier. | [B]Description:[/B]
We have two pre-amplifiers:
New: Max. range 5GeV, Two sensitivity |
|
3
|
Wed Dec 5 17:29:24 2018 |
Chen, Sidhu | Detectors | signal map | [B]Description:[/B]
Here is a summary of signal map. The charged |
13x |
4
|
Fri Dec 7 10:56:04 2018 |
Jan Glorius | SlowControl | EPICS ioc on raspberry | We have an EPCIS server (ioc) running on our
raspberry (ext-027377). It talks to our MesyTec
modules (MSCF shapers, MHV4 high-voltages).
|
|
5
|
Fri Dec 7 11:39:41 2018 |
Jan Glorius | SlowControl | GUI for remote control of MSCF+MHV4 | We have a GUI for remote controlling our MesyTec
modules MSCF16 and MHV4 for E121 experiment.
|
|
6
|
Mon Dec 10 11:59:15 2018 |
Chen, Sidhu | Detectors | Test of shaping amplifier. | [IMG]elog:6/1[/IMG]
[IMG]elog:6/2[/IMG]
|
|
7
|
Tue Mar 12 12:54:58 2019 |
Chen, Sidhu | DAQ | how to start DAQ and plot histogram. | [B]1. login litv-exp account[/B]
rchen@lxg1254:/data.local2/2002_238UIMS$
ssh -X litv-exp@lxg0155.gsi.de
|
|
8
|
Tue May 7 15:52:47 2019 |
Chen, Sidhu | SlowControl | GUI for remote control of MSCF+MHV4 [detailed] | We have a GUI for remote controlling our MesyTec
modules MSCF16 and MHV4 for E121 experiment.
|
|
9
|
Tue May 28 08:36:14 2019 |
Jan | DAQ | MBS start & RFIO server | You need a DAQ-PC and the RIO crate computer.
All of the DAQ proceedures laid out here
are operated from inside the DAQ screen session.
|
|
10
|
Wed Jun 26 16:20:31 2019 |
Jan | DAQ | unpacker: lmd > root | I have written an unpacker for the lmd data
taken with the current daq-system for E121.
The crate configuration is as follows:
|
|
11
|
Tue Aug 27 14:53:47 2019 |
Chen, Sidhu | Detectors | The thickness uncertainty of Ta is less than 1%. | The thickness of Ta plate have been measured
by target group. The result is show as following.
According to this measurement, the thickness |
|
12
|
Thu Oct 24 15:36:13 2019 |
Chen, Sidhu | Detectors | Detector installation process | [IMG]elog:12/1[/IMG]
[IMG]elog:12/2[/IMG]
[IMG]elog:12/3[/IMG] |
|
13
|
Wed Jan 29 10:42:42 2020 |
Shahab | General | Gas target control with the new control system event |
Many thanks to Sergey and Nikos we have tested
the connection of the new control system |
|
14
|
Fri Feb 21 11:30:52 2020 |
Laszlo | General | Shift plan | e127: https://docs.google.com/spreadsheets/d/14m8WcCq1erx6HqWJRK7TLbCx121IkjqGa5l-frf4YjI/edit#gid=0
e121: https://docs.google.com/spreadsheets/d/10MUzA5-Ilf2WzCyNj8u_KSG6yzPg0e4vtZGGPFB3K-k/edit#gid=0 |
|
15
|
Tue Feb 25 15:48:31 2020 |
ruijiu chen | DAQ | Important folders of e121 eperiments: | 1. slow control:
1.1. program file:
litv-exp@ringpi:~/epics/mrcc_ioc/db $
|
|
16
|
Tue Feb 25 15:49:58 2020 |
ruijiu chen | DAQ | changing scaling factor. | How to change scaling factor?
The parameters is in f_user.c file:
1. open the f_user.C with emacs :
|
|
17
|
Thu Feb 27 14:04:12 2020 |
Ruijiu Chen | Detectors | Remote control of HV module | Be careful. The voltage value on user interface
is 10 times of real value. e.g. if the real
value is 32V, the voltage value on UI has |
|
18
|
Thu Mar 26 17:21:40 2020 |
Ragan | General | Stochastic cooling | 1) From SIS, 206Pb67+ @401.17 MeV/u goes to
FRS where only SEETRAM is placed in the target
area to strip off 206Pb67+ to get 206Pb81+.
|
|
19
|
Fri Mar 27 13:02:07 2020 |
Ragan | General | Stochastic cooling | 1) ESR team is successful with the Stochstic
cooling of primary H-like 206Pb81+ beam @400
MeV/u.
|
|
20
|
Fri Mar 27 13:04:17 2020 |
Ragan | General | FRS Settings until now | Yuri and Helmut have been extensively involved
in tuning and optimizing of the FRS.
|
|
21
|
Fri Mar 27 13:40:54 2020 |
Ragan | General | NTCap start and shutdown information | The attachment contains information on how
to start and shutdown NTCap and bridge computer. |
|
22
|
Fri Mar 27 19:51:37 2020 |
Ragan | General | ESR Machine | By changing the tune to Qx=2.33, Qy=2.36 the
momentum acceptance was significantly improved.
A variation of the cooler voltage of 10300 |
|
23
|
Fri Mar 27 19:59:09 2020 |
Ragan | General | Beam stacking in ESR is achieved | Thanks to Sergey and Markus, stacking of primary
H-like 206Pb81+ beam in ESR is achieved.
|
|
24
|
Fri Mar 27 20:05:43 2020 |
Ragan | General | H2 gas jet ready | Thanks to Nikos, stable H2 gas jet target
with 10^14 particles/cm^3 is ready.
(More information can be found on: https://ulpc24.gsi.de/cgi-bin/jet.py?gasart=Helium |
|
25
|
Fri Mar 27 20:52:31 2020 |
Ragan | General | Plans for the measurement with 206Pb81+ | We plan to measure:
1. Lifetime of H-like 206Pb81+ beam with |
|
26
|
Sat Mar 28 01:14:19 2020 |
Ragan | General | Cross-section for capture and ionisation of 206Pb81+ with H2 target | Cross-section for capture and ionisation of
206Pb81+ with H2 gas jet target are calculated
using GLOBAL code.
|
|
27
|
Sat Mar 28 04:32:15 2020 |
Ragan | Detectors | Ionisation events on DSSSD | XY co-relation of DSSSD showing 206Pb82+ beam
hitting the CsISiPHOS detector present in
the inner pocket of ESR after the first dipole |
|
28
|
Sat Mar 28 04:50:34 2020 |
Ragan | Detectors | MWPC | Alex and Pierre-Michel applied 1500 V to the
anode and adjusted the threshold in Messhute.
x1 signal was small & noisy and rest of the |
|
29
|
Sat Mar 28 11:00:14 2020 |
Ragan, RuiJiu, Mei, Yuri, Tino | Detectors | Movement of detector | 10:51 am the CsISiPHOS is moved to 65 mm from
60 mm.The spot on the DSSSD is changed by
5 mm which confirms the hit of the beam.
|
|
30
|
Sat Mar 28 11:07:49 2020 |
Ragan, RuiJiu, Tino, | General | Nikos is changing gas jet target | The gas jet target is now being changed from
H2 to Ar by Nikos. |
|
31
|
Sat Mar 28 11:20:10 2020 |
Ragan, RuiJiu, Mei, Yuri, Tino | General | Reducing beam intensity in ESR | Yuri reduces beam intensity in the ESR to
reduce the countrate on the detectors. |
|
32
|
Sat Mar 28 11:28:11 2020 |
Ragan, RuiJiu, Mei, Yuri, Tino | General | ESR open | ESR is open now |
|
33
|
Sat Mar 28 12:19:21 2020 |
Ragan, RuiJiu | DAQ | Change of the polarity of Amplifiers | Since last night, the signals from the p-side
of all the Si pads were seen as negative
on picoscope.
|
|
34
|
Sat Mar 28 13:09:11 2020 |
Mei,Yury, Tino, Ragan, Ruijiu | General | Shift plan | From Yury,
For now, measure the beam life time with |
|
35
|
Sat Mar 28 13:19:56 2020 |
Ragan | Runs | Template | beam:
energy:
storage time:
|
|
36
|
Sat Mar 28 14:19:24 2020 |
Ragan, RuiJiu, Mei, Yuri | General | Instructions to change the electron cooler current | Attached are the instructions on how to change
the electron cooler current for the lifetime
measurements of 206Pb81+ beam (interaction |
|
37
|
Sat Mar 28 15:07:40 2020 |
ruijiu | DAQ | start run | |
|
38
|
Sat Mar 28 15:19:23 2020 |
ruijiu | | start run e121_run_0236.lmd | store 206Pb81+ beam inside ESR and measure
its halflife.
The HV of detector is off.
|
|
39
|
Sat Mar 28 15:23:05 2020 |
Alex, Ragan, Mei Bai | General | beam lifetime measurement | We see two species in the Schottky spectra
during the beam lifetime measurement without
the target. The one (probably the primiary |
|
40
|
Sat Mar 28 16:09:50 2020 |
Alex | General | no beam in the ESR | Ragan and Ruijiu went in the ESR for short
time to fix something with the slow control
of the silicon detector.
|
|
41
|
Sat Mar 28 16:12:25 2020 |
ruijiu, ragan | DAQ | enter ESR and turn on the HV crate. | |
|
42
|
Sat Mar 28 16:29:27 2020 |
Ragan, RuiJiu, Esther | General | Malfunction of several ESR machines | The HKR crew informs us that several machines
in ESR are showing malfunctions.
The on-call expert cannot be reached.
|
|
43
|
Sat Mar 28 18:11:13 2020 |
Alex, Yuri | General | no beam in the ESR | Yuri and Sergey (on phone) have investigated
extensively the problem with having no beam
in the ESR. The FRS has been checked and |
|
44
|
Sun Mar 29 09:40:35 2020 |
ruijiu | DAQ | restart go4 | go4 crush up.
the problem is
due to mbs.
|
|
45
|
Sun Mar 29 09:57:26 2020 |
ruijiu | Detectors | the HV of charged particle detector | MHV1 MHV2
ch1:1st Sipad 4th
Sipad
|
|
46
|
Sun Mar 29 10:09:14 2020 |
ruijiu | | start run e121_run_0237.lmd | Sergey and Yuri are tuning Tl beam. The particle
number in ers is about 1e4. I(SIS)=5e8
run stop: after few minutes (garbage data) |
|
48
|
Sun Mar 29 11:12:00 2020 |
Ragan | Runs | start run e121_run_0239.lmd | Sergey and Yuri are tuning Tl beam. The particle
number in ers is about 1e4. I(SIS)=5e8
|
|
49
|
Sun Mar 29 12:56:02 2020 |
Ragan, RuiJiu | General | Good positive signals from MSCF | As we (RuiJiu and me) changed the jumpers
of MSCF 1, 2,3 and 4 yesterday, now we see
nice positive signals on picoscope.
|
|
50
|
Sun Mar 29 13:04:32 2020 |
Ragan, RuiJiu | Runs | run file: 1298 | The Tl fragments are being stacked (almost
~20 staacks) and tried to store nicely in
ESR.
|
|
51
|
Sun Mar 29 13:05:36 2020 |
ruijiu | DAQ | start ntcap | IQ_2020-03-29_13-05-
56
SC_2020-03-29_13-05-
|
|
52
|
Sun Mar 29 13:43:46 2020 |
| | | |
|
53
|
Sun Mar 29 14:01:45 2020 |
ruijiu | | beam position on DSSD | move the detector 1cm
outside.from 60mm to
70mm.
|
|
54
|
Sun Mar 29 14:29:13 2020 |
ruijiu | | e121_run_00240.lmd | s6 positon at 50mm. |
|
55
|
Sun Mar 29 18:41:31 2020 |
ruijiu | Analysis | Ratio between MPWC rate and DSSD rate | slit Ratio error
-1 18.64 0.4
-2 18.18 0.38
|
|
56
|
Sun Mar 29 18:55:19 2020 |
Shahab | Runs | Frequency list for identification | Here are some frequencies for identification
of the fragments.
|
|
57
|
Sun Mar 29 20:32:20 2020 |
Ragan | General | Template for Pb halflive measurement | beam:
energy:
|
|
58
|
Sun Mar 29 21:02:43 2020 |
ruijiu | Analysis | decay line of 205Tl beam | decay line of 205Tl beam with Ar gas jet target
on and S6 slit at -8mm
Ar gas density~1e12 atoms/cm2 |
|
59
|
Sun Mar 29 21:34:46 2020 |
Ragan | Runs | First run | beam: 206Pb81+
energy: 400 MeV/u
|
|
60
|
Sun Mar 29 21:39:27 2020 |
ruijiu | Analysis | Ionization cross section and capture cross section for h-206Pb + Ar | Ionization cross section = 1320 barn.
Capture cross section = 557+137+44.5=735.5.
sigma_Ion/sigma_cap=1.79 |
|
61
|
Sun Mar 29 21:55:47 2020 |
Ragan | General | MWPC | Alex goes to Messhute to check the signals
from MPWC. After he completes, we start with
the measurements with the primary beam ) |
|
62
|
Sun Mar 29 23:48:12 2020 |
Jan | Analysis | run0251: E_spectra for CsISiPhos | This is a collection of energy spectra of
the CsISiPhos detectors from run0251 with
primary beam.
|
14x |
63
|
Mon Mar 30 00:32:32 2020 |
Ragan | Runs | First measurement with 206Pb81+ beam | beam: 206Pb81+
energy: 400 MeV/u
|
|
64
|
Mon Mar 30 01:01:53 2020 |
Ragan | Runs | First measurement with 206Pb81+ beam | beam: 206Pb81+
energy: 400 MeV/u
|
|
65
|
Mon Mar 30 01:07:29 2020 |
Ragan | General | Problem with SIS runstop: 0256 | There is problem with SIS
Run stop: 0257.lmd (at1:06) |
|
66
|
Mon Mar 30 01:25:57 2020 |
Ragan | Runs | First measurement with 206Pb81+ beam | 01:17 Problem with SIS is solved
01:19 run start 0258.lmd
|
|
67
|
Mon Mar 30 01:43:58 2020 |
Ragan | General | First measurement with 206Pb81+ beam pattern details | The following shows the pattern for first
measurement in ESR (gas jet is on for = 60*5
secs = 300 secs as it can be seen on step |
|
68
|
Mon Mar 30 02:00:46 2020 |
Ragan | Runs | First measurement with 206Pb81+ beam |
beam: 206Pb81+
energy: 400 MeV/u
|
|
69
|
Mon Mar 30 02:27:44 2020 |
Ragan | Runs | Second measurement with 206Pb81+ beam at I_cooler = 200 mA | I_cooler = 200 mA
beam: 206Pb81+
|
|
71
|
Mon Mar 30 02:58:51 2020 |
Sergiy, Dima | Runs | Second measurement with 206Pb81+ beam at I_cooler = 200 mA | I_cooler = 200 mA
beam: 206Pb81+
|
|
72
|
Mon Mar 30 03:30:03 2020 |
Sergiy, Dima | Runs | Second measurement with 206Pb81+ beam at I_cooler = 200 mA | I_cooler = 200 mA
beam: 206Pb81+
|
|
73
|
Mon Mar 30 04:00:19 2020 |
Sergiy, Dima | Runs | Second measurement with 206Pb81+ beam at I_cooler = 200 mA | I_cooler = 200 mA
beam: 206Pb81+
|
|
74
|
Mon Mar 30 04:15:29 2020 |
Ragan | General | Second measurement with 206Pb81+ beam at I_cooler = 200 mA | In the picture below, a very nice storage
of 206Pb81+ at 200 mA electron cooler current
for no gas jet target can be seen in ESR. |
|
75
|
Mon Mar 30 04:30:17 2020 |
Sergiy, Dima | Runs | Second measurement with 206Pb81+ beam at I_cooler = 200 mA | I_cooler = 200 mA
beam: 206Pb81+
|
|
76
|
Mon Mar 30 06:15:13 2020 |
Ragan | Runs | Second measurement with 206Pb81+ beam at I_cooler = 20 mA | I_cooler = 20 mA
beam: 206Pb81+
|
|
78
|
Mon Mar 30 06:30:52 2020 |
Ragan | Runs | Second measurement with 206Pb81+ beam at I_cooler = 20 mA | I_cooler = 20 mA
beam: 206Pb81+
|
|
79
|
Mon Mar 30 06:34:47 2020 |
Ragan | General | Second measurement with 206Pb81+ beam at I_cooler = 20 mA | In the ESR picture below, the decay of beam
is very fast initially for few minutes and
then the decay is constant. But why does |
|
80
|
Mon Mar 30 07:02:15 2020 |
tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 20 mA | I_cooler = 20 mA
beam: 206Pb81+
|
|
81
|
Mon Mar 30 07:34:06 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 20 mA | I_cooler = 20 mA
beam: 206Pb81+
|
|
82
|
Mon Mar 30 08:00:40 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 20 mA | I_cooler = 20 mA
beam: 206Pb81+
|
|
83
|
Mon Mar 30 08:32:05 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 20 mA | I_cooler = 20 mA
beam: 206Pb81+
|
|
84
|
Mon Mar 30 08:56:04 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 10 mA | I_cooler = 10 mA
beam: 206Pb81+
|
|
85
|
Mon Mar 30 09:26:37 2020 |
Tino | Runs | Stopped Second measurement with 206Pb81+ beam at I_cooler = 10 mA | Stopped Data recording for Restart of the
measurement
|
|
86
|
Mon Mar 30 09:34:02 2020 |
Tino | Runs | Restart of second measurement with 206Pb81+ beam at I_cooler = 10 mA | Stopped Data recording for Restart of the
measurement
|
|
87
|
Mon Mar 30 10:01:31 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 10 mA |
I_cooler = 10 mA
|
|
88
|
Mon Mar 30 10:32:01 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 10 mA |
I_cooler = 10 mA
|
|
89
|
Mon Mar 30 10:57:43 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 10 mA |
I_cooler = 10 mA
|
|
90
|
Mon Mar 30 12:12:25 2020 |
ruijiu | General | Instruction of NTCAP for shift person | To start a new run with NTCap, we need to
retart NTCAP.
1. Stop labview program.
|
|
91
|
Mon Mar 30 12:16:04 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 10 mA |
I_cooler = 10 mA
|
|
92
|
Mon Mar 30 12:33:04 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 10 mA |
I_cooler = 10 mA
|
|
93
|
Mon Mar 30 13:02:49 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 10 mA |
I_cooler = 10 mA
|
|
94
|
Mon Mar 30 13:31:58 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 10 mA |
I_cooler = 10 mA
|
|
95
|
Mon Mar 30 13:40:57 2020 |
ruijiu | Detectors | HV of Inner detector | |
|
96
|
Mon Mar 30 13:41:20 2020 |
ruijiu | Detectors | HV of Inner detector | |
|
97
|
Mon Mar 30 14:02:41 2020 |
Tino | Runs | Second measurement with 206Pb81+ beam at I_cooler = 10 mA |
I_cooler = 10 mA
|
|
98
|
Mon Mar 30 14:24:46 2020 |
ruijiu | DAQ | stop taking data. | 1. stop run0272.lmd.
2. stop NTCAP.
NTCAp file:
|
|
99
|
Mon Mar 30 14:48:02 2020 |
ruijiu and Tino | Detectors | The leakcurrent of SiPad is over the setting limit. | Because the
leakcurrent of
6 Sipads is
|
|
100
|
Mon Mar 30 15:03:58 2020 |
ruijiu Tino, Yuri, Lasoro, Nik and Uli | Detectors | the gas bottle is empty. | The gas bottle was empty. Tino replaced
the previous old bottle with 50 bar gas left.
|
|
101
|
Mon Mar 30 16:25:05 2020 |
ruijiu | Detectors | turn down the HV | turn down the hv and pull out the detector.
|
|
102
|
Mon Mar 30 16:37:53 2020 |
ruijiu | Analysis | | |
|
103
|
Mon Mar 30 20:51:06 2020 |
Ragan | Detectors | Bias Voltage for Si-pads | The limit of the leakage current for all Si
pads was increased from 1500 nA to 5000nA
and
|
|
104
|
Mon Mar 30 23:30:35 2020 |
Jan | Analysis | run251 - Si-pad performance & status | Attached are plots for Si-pad 2 with hits
from ionization of 206Pb81+ at the target.
The plots are representative for all Si-pads, |
7x |
105
|
Tue Mar 31 00:47:18 2020 |
Yuri | Runs | S2 slits 0/+35 mm, target bump +13 mm | Run start: 0276.lmd |
|
106
|
Tue Mar 31 15:30:43 2020 |
ruijiu | Analysis | The beam position on DSSD with different conditions on on the dEE spectrum | I analyzed the first measurement with 206Pb81+
beam, run 250-267. |
6x |
107
|
Tue Mar 31 20:32:05 2020 |
Ragan | General | 203Tl80+ 200Hg79+ 205Tl81+ | Below in the schottky spectrum, on left is
203Tl80+ contamination, in middel is 200Hg79+
contamination and on right most is 205Tl81+.
|
|
108
|
Tue Mar 31 20:50:05 2020 |
Ragan | General | 200Hg79+ 205Tl81+ | 203Tl80+ impurity is removed by moving scrapper
inside ESR.
Only 220Hg79+ is left now |
|
109
|
Tue Mar 31 21:07:05 2020 |
Ragan | General | Separation of 203Tl80+ and 200Hg79+ using scrapper in ESR | It can be seen in the video how 203Tl80+ (on
extreme left) and then 200Hg79+ (in middle
originally) is separted from 205Tl81+ by |
|
110
|
Tue Mar 31 23:31:41 2020 |
Shahab | Runs | alpha_p calibration | Vc = 212849.9349
Ic = 0.2
|
|
111
|
Wed Apr 1 01:02:24 2020 |
ruijiu | Detectors | the detector cable is disconnected. | |
|
112
|
Wed Apr 1 01:05:36 2020 |
ruijiu | Detectors | detector position fixed at 60 mm | The detector cable was disconnected . We entered
and reconnected the cable. |
|
113
|
Thu Apr 2 02:36:48 2020 |
Ragan | General | Stochastic cooling and orbit problem | On 1 April by 5 pm, we could stop the stochastic
cooling after the stacking process and also
change the orbit of the Tl beam to centre. |
|
114
|
Thu Apr 2 02:38:32 2020 |
Ragan, Yuri, Sergey, Esther, Oliver | Runs | First measurement with zero storage time | beam: 205Tl81+ (with no scraping)
energy: 400 MeV/u
storage time: zero
|
|
115
|
Thu Apr 2 02:46:57 2020 |
Ragan, Yuri, Sergey, Esther, Oliver | Runs | Measurement with 2 hrs storage time |
|
|
116
|
Thu Apr 2 05:00:44 2020 |
Ragan, Esther, Oliver | Runs | Second measurement with 2 hrs storage time | Electron cooler was off here. Thus, this measurement
is not what we needed.
(in the picture below, it can be seen that |
|
117
|
Thu Apr 2 06:25:13 2020 |
Ragan | Runs | Template | beam: 205Tl81+ (no scraping)
energy: 400 MeV/u
storage time: ___ hrs
|
|
118
|
Thu Apr 2 07:01:32 2020 |
Ragan, Esther, Oliver | Runs | Measurement with 4 hrs storage time | beam: 205Tl81+ (no scraping)
energy: 400 MeV/u
storage time: 4 hrs
|
|
119
|
Thu Apr 2 09:21:19 2020 |
Ruijiu | Runs | 2nd measurement with 2 hrs storage time (repeat) | Because the electron cooler was not switched
on during beam accumulation in the previous
measurement, we repeat this measurement again.
|
|
120
|
Thu Apr 2 12:52:25 2020 |
ruijiu | General | setup FRS with 2 g/cm2 degrader. | Yuri sets up FRS with 2 g/cm2 degrader (previous
one is 1 g/cm2). The ESR is not changed.
The contamination should be less now. |
|
121
|
Thu Apr 2 15:24:15 2020 |
Ragan | General | How to know whether electron cooling is working | For Alle and Kuehler the bottom left status
should look like as shown in pictures below. |
|
122
|
Thu Apr 2 21:03:40 2020 |
Ragan, Yuri, Sergey, Nikos | Runs | Zero hour measurement (S2:-10/35 mm) | beam: 205Tl81+ (no scraping, Al ~1g/cm2)
energy: 400 MeV/u
storage time: zero hrs
|
|
123
|
Thu Apr 2 21:10:57 2020 |
Ragan, Yuri, Sergey, Nikos | Runs | One hour measurement (S2:-10/35 mm) | beam: 205Tl81+ (no scraping, Al ~1g/cm2)
energy: 400 MeV/u
storage time: 1 hrs
|
|
124
|
Thu Apr 2 21:12:39 2020 |
Ragan, Nikos, Pierre-Michel, Dima | Runs | Three hour measurement (S2: 0/35 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 3 hrs
|
|
125
|
Fri Apr 3 00:39:07 2020 |
Ragan, Pierre-Michel, Dima | Runs | Half hour measurement (S2: 0/35 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0.5 hr
|
|
126
|
Fri Apr 3 01:22:13 2020 |
Ragan, Pierre-Michel, Dima | Runs | One hour measurement (S2: 0/35 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 1 hr
|
|
127
|
Fri Apr 3 03:18:06 2020 |
Ragan, Pierre-Michel, Dima | Runs | Zero hour measurement (S2: 0/35 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
|
|
128
|
Fri Apr 3 03:19:46 2020 |
Ragan, Pierre-Michel, Dima | Runs | Half hour measurement (S2: 0/35 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0.5 hr
|
|
129
|
Fri Apr 3 03:59:14 2020 |
Ragan, Pierre-Michel, Dima | Runs | Two hour measurement (S2: 0/35 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 2 hr
|
|
130
|
Fri Apr 3 04:36:21 2020 |
Ragan, Pierre-Michel, Dima | General | Electron cooler problem which was then solved | 04:09 Electron cooler had some problem when
we were stacking for 2 hours measurement.
04:20 GECEBG2T and GECEBG5T were Reset and |
|
131
|
Fri Apr 3 06:35:37 2020 |
Ragan, Pierre-Michel, Dima, Mei, Shahab | Runs | Half hour measurement (S2: 0/35 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0.5 hr
|
|
132
|
Fri Apr 3 10:06:15 2020 |
Shahab | Runs | Plots from Scopes | Just two plots from the scopes for documentation:
magnets.png:
|
|
133
|
Fri Apr 3 11:52:27 2020 |
Shahab | Runs | Stacking 54 times! | |
|
134
|
Fri Apr 3 11:59:50 2020 |
Ragan, Pierre-Michel, Dima | Runs | Four hour measurement (S2: 0/35 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 4 hr
|
|
135
|
Fri Apr 3 12:02:32 2020 |
Ragan, Mei, Shahab | Runs | Half hour measurement (S2: 0/35 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0.5 hr
|
|
136
|
Fri Apr 3 13:21:16 2020 |
Ragan, Mei, Shahab | Runs | Zero hour measurement (S2: 0/35 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
|
|
137
|
Fri Apr 3 13:39:58 2020 |
Ragan, Mei, Shahab, Laszlo | Runs | Eight hour measurement (S2: 0/35 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 8 hr
|
|
138
|
Fri Apr 3 14:08:41 2020 |
Shahab | Runs | Stacking | |
|
139
|
Fri Apr 3 17:55:13 2020 |
Shahab | Runs | Nice picture from 205-Tl | In this high contrast Schottky recording,
the main three frequency peaks are resolved
w.r.t. time from left to right:
|
|
140
|
Sat Apr 4 00:00:20 2020 |
Ragan, Laszlo, Pierre-Michel, Dima | Runs | Zero hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
|
|
141
|
Sat Apr 4 00:11:23 2020 |
Ragan, Pierre-Michel, Dima | Runs | Half hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0.5 hr
|
|
142
|
Sat Apr 4 00:40:29 2020 |
Ragan, Pierre-Michel, Dima | Runs | Zero hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
|
|
143
|
Sat Apr 4 03:06:12 2020 |
Ragan | General | Instructions if electron cooler goes off during long storage time measurements | Please read the attachment. |
|
144
|
Sat Apr 4 03:27:48 2020 |
Ragan, Pierre-Michel, Dima, Shahab | Runs | Six hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 6 hr
|
|
145
|
Sat Apr 4 10:32:16 2020 |
Ragan, Shahab | Runs | Five hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 5 hr
|
|
146
|
Sat Apr 4 13:41:04 2020 |
Shahab | Runs | cooler down | cooler is down. only one device is off GECEBG2T.
updated now it is working. |
|
147
|
Sat Apr 4 15:59:16 2020 |
Ragan, Shahab, Alex, Esther | Runs | 0.5 hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0.5 hr
|
|
148
|
Sat Apr 4 17:32:01 2020 |
Ragan, Alex, Esther | General | No beam in ESR | The beam is coming from SIS but doesn't arrive
in ESR because the quadrupole magnets in
ESR have failed.
|
|
149
|
Sat Apr 4 18:29:44 2020 |
Ragan, Alex, Esther | Runs | 0 hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
|
|
150
|
Sat Apr 4 18:57:49 2020 |
Ragan, Alex, Esther | General | Timing problem with SIS & ESR and problems with stacking | There are further problems with beam stacking
in ESR. It works occasionally but keeps failing.
There is also timing problem between SIS |
|
151
|
Sat Apr 4 19:55:37 2020 |
Ragan, Alex, Esther | Runs | Failed measurement...Ten hour measurement (S2: 0/35 mm and S6: -20/7 mm) | FAILED - measurement was stopped by sudden
loss of the beam
|
|
152
|
Sat Apr 4 22:31:02 2020 |
Alex, Esther | General | Beam in ESR lost | The beam in ESR was lost suddenly at ~22:20
due to a power supply failure of the quadrupoles.
|
|
153
|
Sat Apr 4 23:44:22 2020 |
Ragan, RuiJiu, Laszlo | Runs | Ten hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 10 hr
|
|
154
|
Sun Apr 5 10:21:54 2020 |
Shahab | Runs | 10 hour measurement pictures | Schottky pictures from the 10 hour measurement
gas target, including the time before gas
target. |
|
155
|
Sun Apr 5 10:31:08 2020 |
Ragan, Shahab | Runs | Two hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: hr
|
|
156
|
Sun Apr 5 12:48:58 2020 |
Shahab | Runs | 2hour measurement parent pictures | |
6x |
157
|
Sun Apr 5 13:05:43 2020 |
Ragan, Shahab | Runs | Zero measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
|
|
158
|
Sun Apr 5 15:28:35 2020 |
Ragan, Alex, Esther | Runs | Four hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 4 hr
|
7x |
159
|
Sun Apr 5 20:23:02 2020 |
Ragan, Alex, Esther | Runs | Half-hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0.5 hr
|
7x |
160
|
Sun Apr 5 21:50:02 2020 |
Ragan, Alex, Esther | Runs | Half-hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0.5 hr
|
7x |
161
|
Sun Apr 5 23:28:01 2020 |
Ragan, Alex, Esther | Runs | One-hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 1 hr
|
7x |
162
|
Mon Apr 6 01:02:00 2020 |
Ragan, Laszlo, Nikos | Runs | Three hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 3 hr
|
9x |
163
|
Mon Apr 6 05:28:55 2020 |
Ragan, Laszlo, Nikos | Runs | Zero hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 0 hr
|
|
164
|
Mon Apr 6 05:43:50 2020 |
Ragan, Laszlo, Nikos | Runs | One and a half hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 1.5 hr
|
|
165
|
Mon Apr 6 08:37:02 2020 |
Ragan, Shahab, Pierre-Michel | Runs | 10 hour measurement (S2: 0/35 mm and S6: -20/7 mm) | beam: 205Tl81+ (no scraping , Al ~1g/cm2)
energy: 400 MeV/u
storage time: 10 hr
|
8x |
166
|
Mon Apr 6 09:34:58 2020 |
Shahab | Runs | Pictures from one and a half hour measurement | cheers! |
|
167
|
Mon Apr 6 14:17:54 2020 |
Yuri, Shahab | Runs | FRS valves | We saw reduction in ESR beam life. It turned
out that FRS has opened valves and venting
caused us reduction of the quality of vacuum |
|
168
|
Mon Apr 6 14:57:04 2020 |
Shahab | Runs | cooler down | cooler component GECEBG2T again had to be
reset. |
|
169
|
Mon Apr 6 20:03:50 2020 |
Ragan | General | Experiment finished )) | E121 experiment is finished with the last
10 hours measurement at 19:47 ))
Many thanks to everyone for there significant |
|
170
|
Thu Apr 9 11:16:35 2020 |
Ragan | General | Measurements done in the experiment | |
|
171
|
Thu Apr 9 11:47:28 2020 |
ruijiu | | backup data | 2020.4.8 12:00Started copying
data。
2020.4.9 11:52 Copied 6.3TB
|
|
172
|
Fri Apr 17 18:27:34 2020 |
ruijiu | Analysis | backup data | 1.connect USB harddisk to computer lxg1254
and copy data to sever.
|
|
173
|
Mon Apr 20 11:17:18 2020 |
Ragan | General | Logbook | |
|
174
|
Wed Aug 5 17:19:16 2020 |
Rui-Jiu Chen | Analysis | Data structure | |
|
175
|
Thu Oct 1 22:20:03 2020 |
Jan | DAQ | final unpacker config | We identified an issue with randomly missing
adc channels in all lmd-files before run
0273.
|
|
176
|
Mon Nov 2 16:45:55 2020 |
Jan | DAQ | f_user & mbslog | Attached is the f_user.c and the mbslog.l
files.
The readout function is for the following |
|
177
|
Thu Nov 5 15:13:43 2020 |
Jan | Analysis | root script example | Attached is an example root script/macro that
shows how to use scripts for analysis.
|
|
178
|
Thu Nov 19 09:14:40 2020 |
Jan | Detectors | remote MSCF settings for CsISiPHOS | Attached is a list of all set values for the
5 MSCF shaper modules.
This was done prior to run0251, which served |
|
180
|
Tue Dec 8 15:47:07 2020 |
Jan | Detectors | manual preamp & shaper settings for CsISiPhos | attached is a document showing fotos of all
involved amplifiers in the chain to document
the manual settings active during the experiment.
|
|
181
|
Tue Dec 15 09:25:41 2020 |
Jan | DAQ | SiCsIPhos signal/amplitude reconstruction | |
|
182
|
Mon Mar 29 16:31:09 2021 |
Pierre-Michel | DAQ | cross section | (1.393*^-8 + 3.18*^-13 + 4.707*^-8)/4.707*^-8
= 1.29595 |
|
183
|
Sun May 30 12:09:00 2021 |
Ragan | General | NTCAP | Attached is the info given by Carsten.
The instructions to operate NTCAP are given
on https://wiki.gsi.de/ESR_EXP/ManualOfNTCAP |
|
184
|
Wed Aug 25 15:13:41 2021 |
Jan | DAQ | SC13 clock frequency | The frequency of the clock used as reference
in scaler channel 13 has been measured precisely.
In contrast to what was expected (1.5MHz |
|