HOME ESR EXPERIMENTS LABS etc
E121 E127 E132 E125 E143 laser_cooling_2021 E142 Ê128 E146 E0052 E0018
  Nuclear hyperfine mixing in 229Th89+, all entries  Not logged in ELOG logo
IDdown Date Author Category Subject
  237   Wed Apr 20 10:09:50 2022 RodolfoLaserOptic with spots
The average energy produced by the laser along the beamtime was about 10 mJ/puls. After about two weeks of beamtime some of the optics, especially the optic placed just after the BBO crystall, got some spots, see pictures below. Here the diameter of the laser beam is about 6 mm.
Attachment 1: SHG_Compensator_mitFleck_19-04-2022.jpg
SHG_Compensator_mitFleck_19-04-2022.jpg
Attachment 2: UV_Umlenkspiegel_mitFleck_19-04-2022.jpg
UV_Umlenkspiegel_mitFleck_19-04-2022.jpg
  236   Sat Apr 16 04:19:05 2022 Patrick, Simon, Alex, SarperRunsRuns night + morning shifts 16.04.
Runs of the night shift 16.04. after changing the wavelength range. The new range is 320.12 - 319.859 nm. The step size was decreased from 0.002 nm to 0.001 nm.
The goal was to have the same number of scans as before (261), however, the scan range in the labview program could not be set accordingly. We decided to go with 262 scans after the first run.


TimeSIS-intensitycooler-HVLMD-DAQ2 file nr LMD-DAQ1 file nr scan range(nm)step width(nm)dwell time(s)particles countedcomments
04:24 1.28e9 209616 0338 8051 320.12 - 319.86 0.001 5s 6750 This run had only 260 scans
05:18 1.20e9 209615 0339 8052 320.12 - 319.859 0.001 5s 6300 First run with 262 scans
06:09 1.36e9 209615 0340 8053 320.12 - 319.859 0.001 5s 6910 laser scan started 2 min late at 650 counts
07:03 1.24e9 209615 0341 8054 320.12 - 319.859 0.001 5s 6330
07:59 1.23e9 209615 0342 8055 320.12 - 319.859 0.001 5s 5712
08:51 1.1e9 209615 0343 8056 320.12 - 319.859 0.001 5s 4380
09:44 1.28e9 209615 0344 8057 320.12 - 319.859 0.001 5s 5135
10:39 1.25e9 209615 0345 8058 320.12 - 319.859 0.001 5s 5860
11:30 1.2e9 209615 0346 8059 320.12 - 319.859 0.001 5s 6500
12:22 1.23e9 209618 0347 8060 322.41 - 322.00 0.002 5s 5200 Laser wavelength scan range is changed to 322.41 - 322.00 nm and increment to 0.002 nm.
13:04 1.2e9 209616 0348 8061 322.41 - 322.00 0.002 5s 4411
13:50 1.2e9 209616 0349-0351 8062-8063 322.41 - 322.00 0.002 5s 10651 last scan / 10 loops ~ 3 hours of scan -- Ecooler failed, realized at 16:05 we were on loop8, laser is turned off at 16:10
  235   Fri Apr 15 20:43:18 2022 KonstantinLaserDye changed
Dye of the laser system has been changed. UV laser power increased from ~8 mJ to 11 mJ pulse energy.
  234   Fri Apr 15 12:53:25 2022 Max, DanyalLaserchecked laser pulse energy after change in wavelength range
previous scan range:
the laser pulse energy @ 320.62 nm was ~11 mJ

new scan range:
the laser pulse energy @ 320.12 nm was ~11 mJ
the laser pulse energy @ 319.60 nm was ~10 mJ
  233   Fri Apr 15 12:42:18 2022 Max, Danyal, Carsten, Konstantin, Patrick, SimonGenerallaser wavelength range changed: 320.12 - 319.60 nm

Runs of the morning/afternoon/night shift. The wavelength range is now 320.12 - 319.60 nm.

TimeSIS-intensitycooler-HVLMD-DAQ2 file nr LMD-DAQ1 file nr scan range(nm)step width(nm)dwell time(s)particles countedcomments
12:51 1.2e9 209617 0321 8034 320.12 - 319.60 0.002 5s 5530 ERS Trafo 1.25e7 --> 1.2e9
13:43 1.2e9 209617 0322 8035 320.12 - 319.60 0.002 5s 6408 at 13:49 there was a short broadening of the ion beam in the Schottky spectrum
14:35 1.16e9 209618 0323 8036 320.12 - 319.60 0.002 5s 6585
15:30 1.08e9 209617 0324 8037 320.12 - 319.60 0.002 5s 5701
16:20 1.10e9 209617 0325 8038 320.12 - 319.60 0.002 5s 5470
17:11 1.11e9 209617 0326 8039 320.12 - 319.60 0.002 5s 5519
18:00 1.08e9 209616 0327 8040 320.12 - 319.60 0.002 5s 5402 Ecooler voltage suddenly jumped to 109619 around 18:30. Laser spot seems to drift slowly to an inner position (left on the screen). This might be due to an interplay between a decreasing laser power and the position sensitive detectors of the beam stabilization.
18:52 1.16e9 209620 0328 8041 320.12 - 319.60 0.002 5s 6948
20:39 1.13e9 209619 0329 8042 320.12 - 319.60 0.002 5s 6xxx Dye was changed before this run was started
20:32 1.20e9 209620 0330 8043 320.12 - 319.60 0.002 5s 6948
22:25 1.21e9 209619 0331 8044 320.12 - 319.60 0.002 5s 7120 Night shift took over (Patrick, Simon)
23:15 1.26e9 209619 0332 8045 320.12 - 319.60 0.002 5s 7080
00:06 1.25e9 209616 0333 8046 320.12 - 319.60 0.002 5s 6500
00:59 1.23e9 209616 0334 8047 320.12 - 319.60 0.002 5s 5380
01:50 1.30e9 209616 0335 8048 320.12 - 319.60 0.002 5s 6750
02:41 1.38e9 209616 0336 8049 320.12 - 319.60 0.002 5s 6970
03:32 1.37e9 209616 0337 8050 320.12 - 319.60 0.002 5s 7010
Attachment 1: VoltageJump1830.PNG
VoltageJump1830.PNG
  232   Thu Apr 14 22:44:40 2022 Patrick, Simon, Danyal, MaxRunsRuns night shift 14./15.04.
Runs of the night shift. The wavelength range is 320.62 - 320.10 nm.

TimeSIS-intensitycooler-HVLMD-DAQ2 file nr LMD-DAQ1 file nr scan range(nm)step width(nm)dwell time(s)particles countedcomments
22:38 9.5e8 209621 0305 8018 320.62 - 320.10 0.002 5s 5000 laser scan was started 1 min late
23:38 9.8e8 209622 0306 8019 320.62 - 320.10 0.002 5s 5550
00:32 1.0e9 209621 0307 8020 320.62 - 320.10 0.002 5s 4000 After ~4000 counted particles (second scan, 1:04 am) the e-cooler went off.
01:21 1.1e9 209622 0308 8021 320.62 - 320.10 0.002 5s 6700
02:12 1.2e9 209623 0309 8022 320.62 - 320.10 0.002 5s 6400
03:03 1.1e9 209624 0310 8023 320.62 - 320.10 0.002 5s 5500
03:55 1.3e9 209622 0311 8024 320.62 - 320.10 0.002 5s 7700
04:47 1.2e9 209622 0312 8025 320.62 - 320.10 0.002 5s 5300
05:36 1.2e9 209620 0313 8026 320.62 - 320.10 0.002 5s 6666
06:25 1.2e9 209619 0314 8027 320.62 - 320.10 0.002 5s 6500 change of shift crew (Danyal & Max)
07:16 1.2e9 209618 0315 8028 320.62 - 320.10 0.002 5s 5230
08:13 1.2e9 209620 0316 8029 320.62 - 320.10 0.002 5s 6600
09:04 1.1e9 209619 0317 8030 320.62 - 320.10 0.002 5s 6660
09:54 1.2e9 209619 0318 8031 320.62 - 320.10 0.002 5s 5950
10:49 1.1e9 209619 0319 8032 320.62 - 320.10 0.002 5s 6580
11:38 1.1e9 209617 0320 8033 320.62 - 320.10 0.002 5s 5380
  231   Thu Apr 14 19:46:46 2022 Sarper & Konstantin & RodolfoLaserLaser power
We checked the laser power before starting the new scan range.

- Seed energy before Cobra @ 532 nm: 513 mJ (before 499 mJ).
- New correction factor for Monitor: 71.25.
- UV output energy after SHG @ 320.1 nm: 11 mJ

All values are averaged over 500 laser pulses.
  230   Thu Apr 14 17:47:55 2022 Carsten, Rodolfo, Konstantin, SarperRunsAfternoon shift runs 14.04 changing the wavelength scan range
The new scan range is changed from 321.12 - 320.60 nm to 320.62 - 320.10 nm

TimeSIS-intensitycooler-HVLMD-DAQ2 file nr LMD-DAQ1 file nr scan range(nm)step width(nm)dwell time(s)particles countedcomments
18:36 9.5e8 209618 0301 8014 320.62 - 320.10 0.002 5s 6270
19:45 9.4e8 209615 0302 8015 320.62 - 320.10 0.002 5s 5400
20:44 8.4e8 209618 0303 8016 320.62 - 320.10 0.002 5s 4210
21:37 8.9e8 209616 0304 8017 320.62 - 320.10 0.002 5s 4550
  229   Thu Apr 14 12:38:38 2022 SebastianDetectorsXUV / Cu checkups
Check regularly if the connection to the XUV and Cu detectors are still active and the detectors move in (after injection) and out (after killing the ion beam). 

Therefore, 2 programs should run on the computer where you can also see the running Schottky.

One of the programs is for the XUV and one is for the Cu mirror.
There the Automisation button should be activated!!!

ID 30 contains the manual how to run / start and operate both detectors.
  228   Thu Apr 14 12:27:18 2022 Sebastian, MaxDetectorsConnection to XUV / Cu reestablished!
The connection to the XUV and Cu were lost during the nightshift.

The XUV detector was in the park position,
BUT the Cu mirror was in the "Measurement position" (moved in / active).

This could be one of the main problems that we had much lesser ion beam intensity since the UNILAC and SIS18 failures last night.
  227   Thu Apr 14 10:57:11 2022 CarstenAcceleratorMaintanence UNILAC / Op training
We had no beam since about 1000. Also, we are still trying to find out why we have such a low intensity in the expereimnt.
Presently, there is a planned maintenance in the UNILAC, beam is expected back in 25-30 mins.
The profile grid TE3 in the transfer beamline in front of the target will be used to check if the extracted SIS beam has changed compared to before the crash of the SIS.
All devices in the ESR seem to work normally including ramping of cooler current/voltage, dipole correction windings and sextupoles (all checked).
As we observed that coolng performace after injection is much worse Markus (Steck) suggested that we could try a longer manual cooling in machine 3 (pleae no cahnges in timimng) to see whether the SIS energy has changed (similar to about 1 week ago).
Cooler elctron current iis put back to 450ma (inejection / 40mA measurement).
  226   Thu Apr 14 08:41:42 2022 CarstenAcceleratorLow intensity at the experiment after series of failures during the night
After the recovery from the failures during the night, we see much lower intensity at the experiment (measured with the particle detector count rate).
Instead of 8000-10000 cts we see only 3000-4000cts at comparable SIS intensities.
Also ESR cooler seems to be slightly unstable (wiggling lines) during injection. However, it is visually evident from the Schottky that the injected intensity already is much lower than yesterday evening.

All devices in ESR are (seem to run ) runnng properly, and also slit position (PN devices) are ok.

I am going to open the slits iin the SIS ESR transfer beamline. It would be useful to check for the SIS-ESR timing.
  225   Thu Apr 14 06:29:18 2022 Max, SebastianAcceleratorlesser ESR injection intensity
We now have less ESR injection intensity (see screenshot attached).

This can also be seen in the count rate after "UNILAC/SIS failures".
Before failure: ~7k-8k
Now: 3k

The stored particles in the SIS are only in the range between 1.4 and 1.7e9 
Attachment 1: 2022_04_14-lowCountRate-LesserESRInjection-SchottkyIntensity.JPG
2022_04_14-lowCountRate-LesserESRInjection-SchottkyIntensity.JPG
  224   Wed Apr 13 15:41:29 2022 Rodolfo & SarperLaserLaser status
We have checked the power of the laser and optimized it "a bit".

- Seed energy for the Cobra @ 532 nm: 508 mJ (before 496 mJ)*
- New correction factor for the Monitor: 43.
- UV energy after the SHG @ 321.1 nm: 11.6 mJ*



*Average over 500 pulses.
  223   Wed Apr 13 14:29:04 2022 Carsten, Rodolfo, Sarper, David, Pierre-Michel, Max, SebastianRunsAfternoon - morning shift runs 13.+14.04.
Changed the wavelength scan range from 321.62 - 321.10 nm to 321.12 - 320.60 nm after one scan.

TimeSIS-intensitycooler-HVLMD-DAQ2 file nr LMD-DAQ1 file nr scan range(nm)step width(nm)dwell time(s)particles countedcomments
14:28 1.9e9 209618 0254 7983 321.62 - 321.10 0.002 5s 7950
15:35 1.7e9 209613 0255 7984 321.12 - 320.60 0.002 5s 7100 Wavelength range has changed starting from this scan
16:21 1.8e9 209612 0256 7985 321.12 - 320.60 0.002 5s 6900
17:11 1.8e9 209619 0257 7986 321.12 - 320.60 0.002 5s 7950
17:57 2.0e9 209618 0258-0259 7987 321.12 - 320.60 0.002 5s 8900
18:48 2.1e9 209620 0260-0261 7988 321.12 - 320.60 0.002 5s 9260 After the scan was complete, we have realized that TCL 1064 computer is crashed.. fixed @ 20:05
20:07 2.1e9 209621 0262 7989 321.12 - 320.60 0.002 5s 7800
20:56 2.0e9 209620 0263 7990 321.12 - 320.60 0.002 5s 8190 After closing file, we replaced the dye from the laser.
22:10 0 209620 0264 7991 321.12 - 320.60 0.002 5s 0 No beam due to failures in Unilac and SIS. NTCAP stopped 01:44, restarted 02:15
02:20 1.5e9 209620 0265 7992 321.12 - 320.60 0.002 5s 0 Electron cooler problem during scan, bad file.
02:52 1.4e9 209624 0266-0267 7993 321.12 - 320.60 0.002 5s 3076 --> CU mirror in all time !!!
03:44 1.6e9 209625 0268-0269 7994 321.12 - 320.60 0.002 5s 5156 --> CU mirror in all time !!!
04:35 1.7e9 209624 0270-0271 7995 321.12 - 320.60 0.002 5s 3430 --> CU mirror in all time !!!
05:27 1.6e9 209621 0272-0273 7996 321.12 - 320.60 0.002 5s 3200 --> CU mirror in all time !!!
06:17 1.6e9 209621 0274-0275 7997 321.12 - 320.60 0.002 5s 3371 low particle count since 22:00, see ID:225, --> CU mirror in all time !!!
07:24 1.5e9 209622 0276-0277 7998 321.12 - 320.60 0.002 5s 3366 --> CU mirror in all time !!!
08:33 1.6e9 209621 0278-0279 7999 321.12 - 320.60 0.002 5s 2940 ecooler jumped to 209615 during measurement, --> CU mirror in all time !!!
09:26 1.5e9 209618 0280 8000 321.12 - 320.60 0.002 5s aborted, request of Carsten
09:46 1.6e9 209621 0283-285 8003 321.12 - 320.60 0.002 5s 2950 small ecooler current changes (300mA injection and 50mA @ measurement), fragments survive in schottky @ lower frequencies (see attached pic1 and pic2), it seems to be that the cooler does not work correctly in "phase 1" (pic 1), --> CU mirror in all time !!!
11:28 1.75e9 209624 0287 8005 321.12 - 320.60 0.002 5s ~1800 ESR cooler back to 450mA (injection), 40mA (measurement), additional manual waiting time of 15s in machine 3 (after injection before ramping); ABORT laserscan on Carstens request after ~1 loop; Sergey arrived and we get some time for ion beam adjustements, --> CU mirror in all time !!!
12:23 1.5e9 209623 0289-0290 8007 321.12 - 320.60 0.002 5s 8100 Cu mirror is again automated and intensity in ESR is back up ; @12:42 increase of the width of the ion beam (pic3) @12:43 again normal width, intensity dropped significantly over time afterwards
13:09 1.55e9 209622 0291-292 8008 321.12 - 320.60 0.002 5s 4852 beam killed @ loop 2 scan nbr 253 (8 steps missed)
14:00 1e9 209622 0293-0294 8009 321.12 - 320.60 0.002 5s 5509
14:48 9.5e8 209622 0295-0296 8010 321.12 - 320.60 0.002 5s 5477
15:47 1e9 209622 0297-298 8011 321.12 - 320.60 0.002 5s 6336
16:42 7e8 209619 0299 8012 321.12 - 320.60 0.002 5s 2424
17:45 9.9e8 209620 0300 8013 321.12 - 320.60 0.002 5s 5133
Attachment 1: coolerProblemsAndFragments.JPG
coolerProblemsAndFragments.JPG
Attachment 2: fragments.JPG
fragments.JPG
Attachment 3: BroaderIonBeam.JPG
BroaderIonBeam.JPG
Attachment 4: againNormalWidth.JPG
againNormalWidth.JPG
  222   Tue Apr 12 21:56:54 2022 Volker, David, Pierre-Michel & Danyal, Alexandre, SebastianGeneralnew laser wavelength scan range 321.62 - 321.10 nm
New wavelength scan range is 321.62 - 321.10 nm. Before the new scan range (compare old scan range in Entry 215) was applied,
the cooler settings were slightly modified. Current was changed from 50 mA to 40 mA, correction voltage was changed from 3943 V to 3948 V. Additionally, the positions
of scraper NA was changed from -10 mm to -8 mm and scraper NI from +10 mm to +8 mm.


TimeSIS-intensitycooler-HVLMD-DAQ2 file nr LMD-DAQ1 file nr scan range(nm)step width(nm)dwell time(s)particles countedcomments
21:57 1.55e9 209621 0226-0227 7962 321.62 - 321.10 0.002 5s 7835
22:54 1.4e9 209612 0228 7963 321.62 - 321.10 0.002 5s 3326 PMT south voltage reduced to 2400 V before run, Threshold now 80, Cooler Voltage changed to 209628 V at 23:19
23:45 2.0e9 209628 0229-0230 7964 321.62 - 321.10 0.002 5s 8560
00:34 1.7e9 209626 0231 7965 321.62 - 321.10 0.002 5s 7169
01:29 1.1e9 209624 0232 7966 321.62 - 321.10 0.002 5s 6412
02:19 1.75e9 209626 0233 7967 321.62 - 321.10 0.002 5s 7590
03:06 1.6e9 209630 0234 7968 321.62 - 321.10 0.002 5s 6329
03:58 1.7e9 209629 0235-0236 7969 321.62 - 321.10 0.002 5s 7710
04:43 1.8e9 209629 0237 7970 321.62 - 321.10 0.002 5s Electron cooler went red @04:48
05:48 1.5e9 209623 0238 7971 321.62 - 321.10 0.002 5s 9420
06:42 1.6e9 209616 0239 7972 321.62 - 321.10 0.002 5s 8250
07:32 1.7e9 209621 0240 7974 321.62 - 321.10 0.002 5s 8840 file 7943 was started accidentally too early and killed
08:22 1.85e9 209622 0241 7975 321.62 - 321.10 0.002 5s ABORTED: laser did not start scanning
08:33 1.90e9 209624 0242-243 7976 321.62 - 321.10 0.002 5s 9955
09:23 1.7e9 209624 0244-0245 7977 321.62 - 321.10 0.002 5s 9021 09:50 Ecooler 12V drop for a few seconds; 9:52 again 12V E-cooler drop
10:12 1.85e9 20962x 0246 7978 321.62 - 321.10 0.002 5s 8067
11:10 1.7e9 209615 0247-248 7979 321.62 - 321.10 0.002 5s 8905
11:59 1.94e9 209612 0249-0250 7980 321.62 - 321.10 0.002 5s 8203 drop in E-cooler voltage of 8V at about 12:16 (before there was a slow increase from .612 to .620)
12:48 2.0e9 209612 0251-0252 7981 321.62 - 321.10 0.002 5s 8018 E-cooler is not very stable (varies between .604 and .613) ; ~13:18 E-Cooler 18V jump to 209622V
13:36 1.7e9 209621 0253 7982 321.62 - 321.10 0.002 5s 8170
Attachment 1: Ecooler12VdropOn13_04_22_9_52am.png
Ecooler12VdropOn13_04_22_9_52am.png
Attachment 2: Ecooler18VEcoolerJumpOn13_04_22_13_18pm.png
Ecooler18VEcoolerJumpOn13_04_22_13_18pm.png
  221   Tue Apr 12 17:01:30 2022 KonstantinDetectorsVoltage PMT North
Voltage of PMT North has been increased from 2500 V to 2600 V. Additionally the threshold was adapted from 25 mV to 12 mV.
  220   Tue Apr 12 15:05:56 2022 RodolfoLaserLaser status
We have checked the laser power at 14:15 *

- Pump energy after Q-Ray @ 532nm: 559 mJ.
- Seed energy for Cobra @ 532 nm: 505 mJ (before 481 mJ).
- Correction factor for monitor: 28.8.
- UV-Energy after SHG @ 321.6 nm: 13.7 mJ.


* All values are averaged over 500 shots 
  219   Tue Apr 12 14:52:19 2022 RodolfoDetectorsPMT Nord, Middle. Datasheets
Attached are the datasheets for the solar-blind PMTs.

- PMT Nord. Type 9423. SN: 650
- PMT Middle. Type 9422. SN: 1049
Attachment 1: ET-Enterprises_DataSheets_PMT_9423-9422.pdf
ET-Enterprises_DataSheets_PMT_9423-9422.pdf ET-Enterprises_DataSheets_PMT_9423-9422.pdf ET-Enterprises_DataSheets_PMT_9423-9422.pdf ET-Enterprises_DataSheets_PMT_9423-9422.pdf ET-Enterprises_DataSheets_PMT_9423-9422.pdf
  218   Tue Apr 12 14:11:52 2022 RaganDetectorsSideband in Schottky
> Sometimes we see a broad sideband at lesser Schottky frequencies to the high-intensity thorium beam.
> 
> Pic 1 shows the relative broad sideband on the left.
> 
> Pic 2 depicts the vanishing of the sideband after ~1-2 minutes.


These are not the sidebands. Maybe some short-lived fragments survive even after the scrapers are used?
  217   Tue Apr 12 13:24:40 2022 Alexandre, SebastianDetectorsSideband in Schottky
Sometimes we see a broad sideband at lesser schottky frequencies to the high intensity thorium beam.

Pic 1 shows the relative broad sideband on the left.

Pic 2 depicts the vanishing of the sideband after ~1-2 minutes.
Attachment 1: IMG_20220412_125530_resized_20220412_125736155.jpg
IMG_20220412_125530_resized_20220412_125736155.jpg
Attachment 2: IMG_20220412_125643_resized_20220412_125736537.jpg
IMG_20220412_125643_resized_20220412_125736537.jpg
  216   Tue Apr 12 12:41:20 2022 Alexandre, SebastianAcceleratorno beam in SIS18
  215   Tue Apr 12 04:43:29 2022 Alexandre, Kristian, SebastianRuns322.01 - 321.60 nm
We scan the wavelength scan range is 322.01 - 321.60 nm

before the first scan of the new wavelength range we changed the high voltage divider ratio in Labview from 248514 to 248517, which is the correct value for this voltage. This leads to slightly higher cooler voltages in the log.

TimeSIS-intensitycooler-HVLMD-DAQ2 file nr LMD-DAQ1 file nr scan range(nm)step width(nm)dwell time(s)particles countedcomments
04:40 1.9e9 209625 0203 7938 322.01 - 321.60 0.002 5s 8830
05:20 1.7e9 209626 0204 7939 322.01 - 321.60 0.002 5s 7800
06:00 1.6e9 209626 0205 7940 322.01 - 321.60 0.002 5s 8500
06:45 1.7e9 209620 0206 7941 322.01 - 321.60 0.002 5s 9400 cooler HV decreased slowly by a few V, jumped back at ~7:03
07:25 1.8e9 209620 0207 7942 322.01 - 321.60 0.002 5s 9300
08:05 1.75e9 209620 0208 7943 322.01 - 321.60 0.002 5s 9100
08:45 1.7e9 209618 0209 7944 322.01 - 321.60 0.002 5s 9000 cooler HV decreased 5V to 209614 and jumped back to initial value after ~5s
09:25 1.7e9 209618 0210 7945 322.01 - 321.60 0.002 5s 8500
10:05 1.9e9 209618 0211 7946 322.01 - 321.60 0.002 5s 9200 cooler HV decreased steadily to 209611 V during the run
10:45 1.9e9 209611 0212 7947 322.01 - 321.60 0.002 5s 7500 After injecting into the ESR, we saw after cooling some tails left and right of the Shottky peak of Th. Was not there in the runs before. After some minutes it disappeared in the spectrum
11:35 2e9 209611 0213 7948 322.01 - 321.60 0.002 5s it seems to be that much lesser ions are stored in the ESR - counter shows low rate - ABORTED laser didn't start scanning
11:58 1.75e9 209615 0214 7949 322.01 - 321.60 0.002 5s 7700 cooler HV jumped to 209610 at 12:12 and stayed there
12:53 1.85e9 209611 0215 7950 322.01 - 321.60 0.002 5s 7155 cooler HV increased slowly from initial value to ~209618
13:32 1.9e9 209612 0216 7951 322.01 - 321.60 0.002 5s 6638
14:39 1.8e9 209610 0217 7952 322.01 - 321.60 0.002 5s 6815 Voltage was jumping around from 209610 up to 209624 and back
15:20 1.75e9 209612 0218 7953 322.01 - 321.60 0.002 5s 8400 In contrast to the previous measurement, the cooler voltage was drifting by about 3V around 209612
16:00 1.7e9 209612 0219 7954 322.01 - 321.60 0.002 5s 7920
16:58 1.5e9 209612 0220 7955 322.01 - 321.60 0.002 5s 4577 PMT North voltage and threshold modified Entry 221, Ecooler voltage dcreased to 209609 V, weak injection
18:09 1.62e9 209609 0221 7957 322.01 - 321.60 0.002 5s During the last injection the beam suddenly got lost during the scraping, File 7956 was discarded since go4 was still during the startup of mbs
18:49 1.69e9 209609 0222 7958 322.01 - 321.60 0.002 5s 6133
19:49 1.6e9 209610 0223 7959 322.01 - 321.60 0.002 5s 7035
20:29 1.78e9 209611 0224 7960 322.01 - 321.60 0.002 5s 4490
21:12 1.86e9 209622 0225 7961 322.01 - 321.60 0.002 5s 10296 Note that the cooler voltage is increased. Particle number might be overestimated since it was read when the beam was already dumped.
Attachment 1: DriftingVoltage14-40.PNG
DriftingVoltage14-40.PNG
  214   Mon Apr 11 22:33:16 2022 CarstenGeneralBackup of data to the external RAID disks
  213   Mon Apr 11 22:14:51 2022 Konstantin, SarperLaserChanging of the wavelength range
It is planned to change the scan range of the laser wavelength from 322.41 - 322.0 nm to 322.01 - 321.6 nm @ 4 a.m. 
  212   Mon Apr 11 18:57:18 2022 RodolfoLaserNew flashlamps
We (Sarper, Konstantin and me) have changed the old flashlamps (with ~ 26 Mio. shots) by new "fresh" ones. We have also exchange the dye. Here are some parameters of the laser we measured with the new flashlamps and dye*:

- Output energy after the Quanta-Ray (@ 532 nm): 598 mJ.
- Seed energy for Cobra (@ 532 nm): 505 mJ.
- Correction factor for monitor; 15.9.
- Output energy after Cobra's main amplifier cell (@ 640 nm): 107 mJ.
- Output energy after SHG (@ 320 nm): 15.8 mJ.


* all values are average over 500 shots.
** below you can see a picture of the "old" flashlamps.
Attachment 1: Blitzlampe_26Mio_Schüsse_11-04-2022.jpg
Blitzlampe_26Mio_Schüsse_11-04-2022.jpg
  211   Mon Apr 11 18:46:31 2022 Rodolfo, Sarper and KonstantinLaserAlignment-check
We cross-checked the laser-ion alignment. The horizontal position was optimized. However, 
since the laser beam is much larger than the ion beam, this was not an issue for measurements, which
have been performed during the last shifts.
The modified parameters of the stabilization system are attached.
Attachment 1: MRC_Konfiguration_MitMainAmp_04-11-2022.png
MRC_Konfiguration_MitMainAmp_04-11-2022.png
  210   Mon Apr 11 14:45:11 2022 Paul, Konstantin, Sarper, DavidRunsAfternoon shift runs 11.04
We continue scan the new wavelength scan range is 322.41 - 322.00 nm



TimeSIS-intensitycooler-HVLMD-DAQ1 file nr LMD-DAQ2 file nr scan range(nm)step width(nm)dwell time(s)particles countedcomments
14:45 1.9e9 209618 0189 7924 322.41 - 322.00 0.002 5s 9100
18:54 1.83e9 209616 0191 7926 322.41 - 322.00 0.002 5s 7300
19:34 1.7e9 209615 0192 7927 322.41 - 322.00 0.002 5s 7110
20:13 1.8e9 20961X 0193 7928 322.41 - 322.00 0.002 5s 6730
20:53 1.8e9 209614 0194 7929 322.41 - 322.00 0.002 5s 7550 During the scan the ecooler voltage changed to approximately 209613
21:43 1.7e9 209614 0195 7931 322.41 - 322.00 0.002 5s 7000
22:30 1.6e9 209612 0197 7932 322.41 - 322.00 0.002 5s 7300
23:10 1.4e9 209614 0198 7933 322.41 - 322.00 0.002 5s 6100 For this measurement, ESR_Ring went red, we realized only after completing the measurement. The sections went red are Dipole Correction Points (GE01KP17-18-19-20, 4 in total) @~23:45 and fixed @01:35...
01:52 1.6e9 209614 0199 7934 322.41 - 322.00 0.002 5s 7151
02:32 1.7e9 209616 0200 7935 322.41 - 322.00 0.002 5s 8368
03:22 1.8e9 209617 0201 7936 322.41 - 322.00 0.002 5s 7005
04:01 1.9e9 209616 0202 7937 322.41 - 322.00 0.002 5s Ecooler voltage increased 4 volts during the run
  209   Mon Apr 11 12:50:22 2022 KristianAcceleratorTh lifetime
We used the counter to measure the lifetime. During the 30 min scan time dropped only slowly. 

During a longer break, e.g., when the laser flash lamps are changed, one could take data over a longer time.
Attachment 1: ThLifetime.JPG
ThLifetime.JPG
  208   Mon Apr 11 11:05:35 2022 Sebastian, KristianLaserCheck laser power
we checked the UV laser power at 10:15 am. It was only 8.5 - 9 mJ. Pumping power was 460 mJ, which is the maximum output of the current system. We should change the flashlamps soon
  207   Mon Apr 11 10:31:07 2022 Kristian, Sebastian, Alexandre, Danyal, PaulGeneralnew laser wavelength scan range 322.41 - 322.00 nm
new wavelength scan range is 322.41 - 322.00 nm

at 10:31

TimeSIS-intensitycooler-HVLMD-DAQ1 file nr LMD-DAQ2 file nr scan range(nm)step width(nm)dwell time(s)particles countedcomments
10:31 1.75e9 209617 0180 7915 322.41 - 322.00 0.002 5s 2300 ABORT ... no laser ... beam stabilization was off
10:40 xxe9 209617 0181 7916 322.41 - 322.00 0.002 5s xxx ABORT ... laser did not start from 322.41 nm
10:42 xxe9 209615 0182 7917 322.41 - 322.00 0.002 5s xxx ABORT ... laser did not start from 322.41 nm
10:45 2.1e9 209616 0183 7918 322.41 - 322.00 0.002 5s 9236 HV E-cooler fluctuates slowly over 3 V
11:22 1.7e9 209616 0184 7919 322.41 - 322.00 0.002 5s xxx
12:02 2.0e9 209616 0185 7920 322.41 - 322.00 0.002 5s 9660
12:43 1.8e9 209618 0186 7921 322.41 - 322.00 0.002 5s 6533 HV E-cooler jump to ~209700k for ~10 seconds and than back to 209618
13:24 2.0e9 209617 0187 7922 322.41 - 322.00 0.002 5s 9500
14:05 2.0e9 209618 0188 7923 322.41 - 322.00 0.002 5s 9220
  206   Mon Apr 11 10:17:01 2022 DanyalAcceleratorInterlock - reset
10:17 
Wie heutemorgen in der Sitzung (morning briefing) vereinbart, 
führt Herr Florenkowski einen Interlock und danach einen Reset von E02MK durch. 
Das dauert nur ca. 15 min. 

nach dem interlock wurde der ESR "rot" 

Um 10:21 war das problem gelöst und der ESR war wieder "blau"
  205   Mon Apr 11 07:54:37 2022 Danyal, Alexandre, Kristian, SebastianAcceleratorJump in E-cooler voltage
We saw a jump in the E-cooler voltage at about 7:50. 
jump from 209619 to 209610 V 

At 7:56 it jumped back to 209619 V
seems stable now  
  204   Mon Apr 11 04:26:53 2022 PatrickDAQNext wavelength range
Measurements with the next wavelength scan range should be started roughly around 10:00 am.
The next wavelength scan range is planned to be 322.41 - 322.00 nm, again with a step size of 0.002 nm, 5s dwell time and 2 loops.
This range includes roughly a third of the first scan range.
  203   Sun Apr 10 22:47:05 2022 Patrick, Volker, Prannay, Danyal, Alexandre, Sebastian, KristianRunsRuns night shift 10.04 + morning shift 11.04
These are the measurement runs of the night shift (10/11.04.).

Wavelength range is still 322.81 - 322.40 nm.


TimeSIS-intensitycooler-HVLMD-DAQ1 start-endLMD-DAQ2 start-endscan range(nm)step width(nm)dwell time(s)particles countedcomments
23:05 1.75e92096200165 - 01657901-7901322.81 - 322.400.0025s8500
23:57 1.?e92096200166 - 01667902-7902322.81 - 322.400.0025s8500The HV of PMT south was changed from 2.5kV to 3kV
00:35 1.4e92096200167 - 01677903-7903322.81 - 322.400.0025s4100
01:18 1.75e92096200168 - 01687904-7904322.81 - 322.400.0025s4400
01:58 1.4e92096200169 - 01697905-7905322.81 - 322.400.0025s7700 The ESR went red after this run. The on-call service was called because of some power supply failure, ETA: 45min.
04:12 1.75e92096200171 - 01717906-7906322.81 - 322.400.0025s7600 With the start of this run, the wavemeter, labview and the python script were restarted. The python script was slightly adjusted.
04:50 1.6e92096200172 - 01727907-7907322.81 - 322.400.0025s8300
05:31 1.6e92096190173 - 01737908-7908322.81 - 322.400.0025s8100
06:09 1.6e92096150174 - 01747909-7909322.81 - 322.400.0025s 8000
06:52 1.8e92096150175 - 01757910-7910322.81 - 322.400.0025s8800 at 07:08 the cooler voltage jumped from 209615 V to 209619 V
07:30 1.9e92096190176 - 01767911-7911322.81 - 322.400.0025s forgotten at 07:50 the cooler voltage jumped from 209619 to 209610 V and back again at to 209619 V
08:18 1.8e92096190177 - 01777912-7912322.81 - 322.400.0025s 9100 08:47 the cooler voltage jumped from 209618 to 209614 V and back again at to 209618 V
08:55 1.75e92096190178 - 01787913-7913322.81 - 322.400.0025s 8300
09:36 1.6e92096190179 - 01797914-7914322.81 - 322.400.0025s 8194


The SIS intensity is taken directly before injection to ESR. Not the SIS peak intensity as in yesterday's table.
  202   Sun Apr 10 15:29:53 2022 RodolfoLaserStatus - Laser system
We have checked the laser system.

- The pump laser has ~ 23Mio shots. The total output energy has dropped to about 475 mJ. Maybe it is time to install new fresh flashlamps. In case the accelerator is going to have any mantainance tomorrow (Monday) then we can take the oportunity to exchange the flashlaps.
- The dye laser is pumped with 470 mJ (angle of lambda/2 plate = 112°).
- The energy after the second harmonic is 11,3 mJ @ 646 nm. We are using the Sarper's calibration table (635 nm - 646 nm)
  201   Sun Apr 10 15:29:37 2022 Carsten,SarperAcceleratorEcooler failed
Ecooler failed @15:23 Carsten is fixing it
Fixed @16:00
  200   Sun Apr 10 15:16:19 2022 Carsten, Rodolfo, SarperRunsRuns afternoon shifts 10.04
These are the measurement runs of the afternoon shift (10.04.).

Wavelength range is changed from 323.2 - 322.8 nm to 322.81 - 322.40 nm.


TimeSIS-intensitycooler-HVLMD-DAQ1 start-endLMD-DAQ2 start-endscan range(nm)step width(nm)dwell time(s)comments
16:261.95e92096200155-01557891-7891322.81 - 322.400.0025slaser scan did not work, labview (Thorium_main.vi) communication issue
16:511.8e92096200156-01567892-7892322.81 - 322.400.0025s
17:331.6e92096180157-01577893-7893322.81 - 322.400.0025s 7894 particles on the counter
18:171.6e92096180158-01587894-7894322.81 - 322.400.0025s 8200 particles on the counter
19:061.8e92096180159-01597895-7895322.81 - 322.400.0025s 8650 particles on the counter
19:441.9e92096180160-01607896-7896322.81 - 322.400.0025s 8600 particles on the counter
20:241.7e92096200161-01617897-7897322.81 - 322.400.0025s 4200 particles on the counter
21:041.7e92096190162-01627898-7898322.81 - 322.400.0025s 8380 particles on the counter
21:451.8e92096190163-01637899-7899322.81 - 322.400.0025s 8550 particles on the counter
22:241.8e92096190164-01647900-7900322.81 - 322.400.0025s 8016 particles on the counter
  199   Sun Apr 10 15:08:42 2022 CarstenDAQBackup of Data from 1rst Scanrange to extrenal RAID1 HDDs
I just performed a backup of all data (+log-Files) that were collected until now to the two RAID HDDs.

For DAQ1: /media/sdc2 - last file 229Thor7889.lmd. Please note, that the naming sceme on DAQ1 is inconsistent - please look for the filenumnbering
For DAQ2: /media/sdd2 - last file 229Th0153.lmd
  198   Sun Apr 10 13:17:53 2022 Kristian, MaxDAQWavemeter readout
We changed the Labview code in order to reduce the amount of data that was overfilling the WM data queue. We removed the temperature and intensity values and added an additional 250ms wait.

We have the same wait in the Krypton VI and believed that it also slowed down the WM reading but this was obviously not the case.

Everything seems to work fine now!

Starting with the .lmd files 0151 / 7887 also the WM reading values are correct
  197   Sun Apr 10 11:11:18 2022 Kristian, MaxLaseradditional WM readout
since the WM readout still does not work reliably, I started a python script at atppc023 that saves timestamp and wavemeter frequency. in folder wavemeter at the desktop. 

it is about 1 MB / h

Rename the old file and restart when you change the wavelength range.
  196   Sun Apr 10 08:53:26 2022 Kristian, MaxLaserTiming verified
timing is still good.

we checked the relative timing between laser and ions. the time difference between photodiodes, PMTs and particle detectors is still the same as original (see ELOG ID 169). The common stop of changed a slightly so that everything appears one bin later.
  195   Sun Apr 10 06:39:16 2022 Kristian, Marek, MaxRunsruns morning shift 10.04.
These are the measurement runs of the morning shift (10.04.).


TimeSIS-intensitycooler-HVLMD-DAQ1 start-endLMD-DAQ2 start-endscan range(nm)step width(nm)dwell time(s)comments
06:xx3e82096xx0141-01417876-7876323.2 - 322.80.0025sjust one loop
06:392e92096210142-01427877-7877323.2 - 322.80.0025s
07:182.1e92096160143-01437878-7878323.2 - 322.80.0025s 8000 particles on counter
07:572.2e92096210144-01447879-7879323.2 - 322.80.0025s
08:371.9e92096200145-01457880-7880323.2 - 322.80.0025s 7200 particles on counter
09:242.1e92096210146-01467881-7881323.2 - 322.80.0025s laser pulse energy @ start of run: 488mJ green monitor, 11.6mJ UV, 7700 particles on counte
10:072.1e92096200147-01477882-7882323.2 - 322.80.0025s optimized WM coupling, the WM data is stretched in this run (buffer problem?), also possible for previous runs
11:042.1e92096200148-01487884-7884323.2 - 322.80.0025s restarted WM, still wrong WM data, stopped after 1 run
11:272.1e92096160149-01497885-7885323.2 - 322.80.0025s restarted WM + LV
12:112.0e92096160150-01507886-7886323.2 - 322.80.0025s wrong WM data
12:551.9e92096160151-01517887-7887323.2 - 322.80.0025s changed LV code (ID: 198), WM data works now!
13:371.8e92096200152-01527888-7888323.2 - 322.80.0025s
14:162.1e92096210153-01537889-7889323.2 - 322.80.0025s1 loop
  194   Sun Apr 10 06:34:49 2022 Kristian, MaxDAQWavemeter Readout
Problem solved. Ignore this entry








If the wavemeter reading is not shown correctly in Go4 - Step2 - Labview:

Close Labview, close WM software (all windows)

Start WM software, start Labview, restart MBS
  193   Sun Apr 10 04:37:29 2022 PatrickDAQNext wavelength range
Measurements with the next wavelength scan range should be started roughly around 12:00 noon. The plan is to go to lower wavelengths / higher energies.
So the next wavelength scan range would be 322.81 - 322.4 nm, again with a step size of 0.002 nm and 5s dwell time.

In the picture below you find some calculations/estimates for the current scan range.
Attachment 1: 2022-04-10_calculations_323nm.jpg
2022-04-10_calculations_323nm.jpg
  192   Sun Apr 10 04:07:53 2022 PatrickDAQgo4 shows wrong frequencies and wavelengths
Update (ID:194): In labview "Stop All", close labview, stop python script (ID:197), close wavemeter. Then restart wavemeter, python script, labview an mbs.

Both labview and the wavemeter software are displaying the scanned wavelength correctly (Fig. 1 & 2), but go4 shows something which looks just like a freely drifting wavelength (Fig. 3).
The Cobra set voltages are displayed correctly.
Attachment 1: 2022-04-10_measured_wavel.png
2022-04-10_measured_wavel.png
Attachment 2: 2022-04-10_measured_wavel2.png
2022-04-10_measured_wavel2.png
Attachment 3: 2022-04-10_measured_wavel_go4.png
2022-04-10_measured_wavel_go4.png
  191   Sun Apr 10 03:56:56 2022 V. HannenDetectorsLow rate in PMT South
PMT south shows a much lower count rate than observed in elog entry 170.

Yesterday the voltage on this PMT was increased to 2400 V and the threshold setting of the CAEN CFD to 90 units, (from 70 units before) however the low readout rate was already apparent both for the analog and the discriminated signal then.

Update Sun Apr 10, 21:45: on advice from D. Winters, increased the PMT voltage to 2500 V (max. the HV supply can do, the PMT could handle up to 3000 V)
Attachment 1: 2022-04-10_PMTs_over_wavel-03_56.png
2022-04-10_PMTs_over_wavel-03_56.png
  190   Sun Apr 10 02:20:17 2022 PatrickDAQNew mbs startup guide
Connecting to the rfio server and opening a file is included in '@startup' now. Since mbs crashes reliably every 3 or 4 runs, it may be preferable to use the following procedure (which did not crash yet):

DAQ1DAQ2
1ssh atplaser@r4l-41ssh stoe_exp@r4l-68
2ThE142_2022see ID:179
3cd mbsrun/th22cd mbsrun/th22cd /esr/usr/stoe_exp/E142Brandau/SCA... (auto complete with tab)
// loop start
4reslresl
5mbsmbs
6@startup@startup
7// connect go4 // connect go4
8sta acsta ac
9// measure// measure
10sto acsto ac
11clo ficlo fi
12exitexit
13// disconnect go4 // disconnect go4
14// go to step 4// go to step 4


Note: At least in DAQ1, step 13 is necessary to be able to reconnect mbs to the rfio server.
  189   Sat Apr 9 19:50:40 2022 Carsten New thresholds for ADC of DAQ2 (starting with file0117)
unsigned short caen_V785AH_threshold_mod0 [32] = 
                {0x0100 , 0x0004 , 0x0003 , 0x0004 , 0x0005 , 0x0004 , 0x0006 , 0x0005 ,
                 0x0006 , 0x0005 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 ,
                 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 ,
                 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 };
  188   Sat Apr 9 19:09:57 2022 RodolfoLaserOptimization - Resonator of dye laser
I have tuned a bit the resonator of the dye laser.

The total output energy after the main amplifier is 86 mJ (@ 645,6 nm)

The laser wavelength read by the wavemeter appears to be more stable (on the windows computer). We can see the histogram once the present scanning is finished.
  186   Sat Apr 9 16:55:19 2022 RodolfoLaser 
16:15 I have changed the dye (of both oscillator and amplifier).

16:27 I have increased the pump energy (@ 532 nm) from 476 mJ to 507 mJ.

- UV output energy @ 322,8 nm: 12 mJ. (Before was at 9 mJ).

- New calibration factor is 160 for Quanta Ray monitor signal.
  185   Sat Apr 9 15:47:21 2022 Carsten, Rodolfo, Sarper, PatrickRunsAfternoon and night shift runs
After the morning shift, we got new increment (nm) for the laser scanning. We are now scanning 2 nm of wavelength range in 5 big steps (5 x 0.4 nm). Started with 323.2 nm - 322.8 nm range. Every big step (0.4 nm) is scanned with 0.002 nm of wavelength increment.

Every scan takes ~ 18 min (0.4 nm range with 0.002 nm steps), we have scanned 2 loops. Total scanning time ~36 min.

DAQ1: lxg1927:/data.local2/BeamTimeTh22/
DAQ2: lxg0155:/data.local2/E142/
LMD file name DAQ1:229Thor
LMD file name DAQ2:229Th

Schottky marker pos: 243.973MHz


TimeSIS-intensitycooler-HVLMD-DAQ1 start-endLMD-DAQ2 start-endscan range(nm)step width(nm)dwell time(s)comments
xx:xxx.xe9209xxx0xxx78xx32x.x - 32x.x0.002xsketch for filling the table
15:141.5e92096240111-01117847-7847323.2 - 322.80.0025s DAQ 2 no VUPROM TDC Pat south
xx:xx1.5e92096240111-01117847-7847323.2 - 322.80.0025s DAQ 2 changed TDC part south from ch 8 to ch 10
17:052.2e92096240113-01137848-7848323.2 - 322.80.0025s successful scan
19:041.8e92096160116-0116 7850-7850 323.2 - 322.80.0025s Intensity optimization, see below, DAQ 2 TDC part south back to channel 8 - ok, XUV detector and Cu mirror moved correctly, lost the laser beam after the half of the second loop
19:491.8e92096140117-0117 7851-7851 323.2 - 322.80.0025s successful scan
20:282.0e92096220118-0118 7852-7852 323.2 - 322.80.0025s successful scan
21:072.2e92096230119-119 7853-7853 323.2 - 322.80.0025s successful scan
22:011.8e92096210122-0122 7856-7856 323.2 - 322.80.0025s successful scan
22:41?20962001237857323.2 - 322.80.0025s First scan started by night shift
23:211.1e920962001247858323.2 - 322.80.0025s mbs crashed at 'sta ac'
23:321.3e920961801257859323.2 - 322.80.0025s e-cooler turned off
23:501.5e9209xxx01267860323.2 - 322.80.0025s the stop point was not set
23:531.5e920961101277861323.2 - 322.80.0025s DAQ2 must have crashed between 23:30 - 23:50
00:071.9e9209xxx01287862323.2 - 322.80.0025s mbs crashed at 'sta ac'
00:231.7e920962301317864323.2 - 322.80.0025s successful scan. we 'resl' after every measurement from now on. 'open file' is included in '@startup' now (ID:190).
01:081.6e920962301327865323.2 - 322.80.0025s successful scan
01:471.6e920962301337866323.2 - 322.80.0025s successful scan
02:351.3e920962301347868323.2 - 322.80.0025s successful scan
03:192.0e920962201357869323.2 - 322.80.0025s successful scan
04:041.3e920962201367870323.2 - 322.80.0025s successful scan
04:441.0e920962201377871323.2 - 322.80.0025s e-cooler turned off
05:251.9e920962201407875323.2 - 322.80.0025s successful scan. DAQ1 was started ~7s before DAQ2. The files between the last measurement an this one are essentially empty.


Carsten (19:00h): I notized that a lot of beam gets lost when starting scraping. I called Sergey Litvinov to help me to introduce some additional cooling/waiting (10s) after the ramp and before scraping and bunching. It increased the number of ions available for the measurement roughly by a factor of 3-5.

Some runs have wrong WM data. Set Wavelength is good.

Following files are saved differently, the command missed the 229Th in the end (/data.local2/BeamTimeTh22/229Thor -auto -rfio)
7850 (19:32)
7855 (21:56)
7856 (22:30)
  184   Sat Apr 9 14:15:44 2022 Kristian, Max, KonstantinDAQChange in LV code
We changed the LV code so that the Cobra Set Wavelength is permanently sent. Before it was only sent once at the beginning of each laser step. This, however, lead to too much data for the LV->MBS server.
This was fixed by inserting a 250 ms wait in LV (in Krypton data VI). Basically, all LV values are now updated every 250 ms, which works fine with MBS
  183   Sat Apr 9 13:45:42 2022 Max, KristianRunsfirst scans with LV problem solved!
This is the first time with LV buffer problem solved (see Elog ID: 184). Before the PMT signals were out of sync with the wavelength data!
We concluded to scan with step sizes of 0.002nm, scan range of 0.5nm (f
nm), dwelltime = 150(5s), loops = 2 (approx.: 30min measurements).

DAQ1: lxg1927:/data.local2/BeamTimeTh22/
DAQ2: lxg0155:/data.local2/E142/
LMD file name DAQ1:229Thor
LMD file name DAQ2:229Th

Shottky marker pos: 243.973MHz

TimeSIS-intensitycooler-HVLMD-DAQ1 start-endLMD-DAQ2 start-endscan range(nm)step width(nm)dwell time(s)comments
11:251.0e92096220102 - 1027839-7839323.2 - 322.80.0023sLV readout problem solved. WM readout is wrong (Cobra set is good)
12:15old beam2096220103 - 1037840-7840323.2 - 322.80.0023s WM readout is wrong
12:502.3e92096170104 - 1047841-7841323.2 - 322.80.0023s couldnt open go4 stream view, stopped after one good scan, WM readout is wrong .
13:202.0e92096170104 - 1057842-7842323.2 - 322.80.0023s first scan with LV correct
13:401.2e92096180106 - 1067843-7843323.2 - 322.80.0023s 3 loops
14:201.5e92096120107 - 1077844-7844323.2 - 322.80.0023s 1 loop


Runs after this have the right cobra set value but propably the wrong WM data until 10.04.22 12:44 (see also ID:198)
  182   Sat Apr 9 06:42:23 2022 KristianLaserLaser step size
We changed the laser step size to 0.002 nm which corresponds to 5.75 GHz.
  181   Sat Apr 9 06:25:22 2022 Max, KristianRunsmorning shift runs
DAQ1: lxg1927:/data.local2/BeamTimeTh22/
DAQ2: lxg0155:/data.local2/E142/
LMD file name DAQ1:229Thor
LMD file name DAQ2:229Th

Shottky marker pos: 243.973MHz

TimeSIS-intensitycooler-HVLMD-DAQ1 start-endLMD-DAQ2 start-endscan range(nm)step width(nm)dwell time(s)comments
xx:xxx.xe9209xxx00xx78xx32x.x - 32x.x0.01xsketch for filling the table
06:401.7e92096190098-00997836323.2 - 321.20.0024slaser pulse energy is @ ~12mJ after SHG
09:351.4e92096240101-01017838-7838323.2 - 322.80.0023sonly 0.5nm range, WM power + coupling tuned to scan range, Konstantin updated LV code to hold Cobra Set WL value, aborted LV readout problem
11:251.0e92096220102 - 1027839-7839323.2 - 322.80.0023sLV readout problem solved. WM readout is wrong (Cobra set is good)
12:15old beam2096220103 - 1037840-7840323.2 - 322.80.0023s WM readout is wrong
12:502.3e92096170104 - 1047841-7841323.2 - 322.80.0023s couldnt open go4 stream view, stopped after one good scan
13:202.0e92096170104 - 1057842-7842323.2 - 322.80.0023s first scan with LV correct
  180   Sat Apr 9 05:26:25 2022 PatrickLaserWavemeter
The wavemeter still shows large spikes from time to time. The exposure time is still at 34ms.
Attachment 1: 2022-04-09_Wavemeter_during_scan5.png
2022-04-09_Wavemeter_during_scan5.png
  179   Sat Apr 9 05:00:11 2022 CarstenGeneralDraft Docs and cheat sheet
Please check the attached files,

and correct or enhance them.

Print out a copy
Attachment 1: e142_daq2_cabling.ods
Attachment 2: Documentation_for_beamtime_2022_.doc
  178   Sat Apr 9 04:40:01 2022 PatrickDAQBugged Trending plots?
The problem from yesterday (ID:147) still persists. All the plots (not only the labview stuff) comes in too late in go4. However, the time axis is correct, see picture.
Attachment 1: 2022-04-09_Cobra_set_wavelength2.png
2022-04-09_Cobra_set_wavelength2.png
  177   Sat Apr 9 04:01:35 2022 Carsten 2nd DAQ
Switched the CAEN TDC back on and changed the threshoolds for the ADC to:

unsigned short caen_V785AH_threshold_mod0 [32] =
{0x0100 , 0x0004 , 0x0003 , 0x0002 , 0x0003 , 0x0002 , 0x0004 , 0x0002 ,
0x0004 , 0x0003 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 ,
0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 ,
0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 };
  176   Sat Apr 9 03:57:10 2022 CarstenAcceleratorNew Cooler voltage after the crash of the cooler
After the restart of the cooler the Ohmlabs divider showed a voltage 16V lower than before. This could also be seen as a slight shift in the Schottky lines w.r.t to the bunching frequency and the marker. Corrected
the voltages at injection to DeltaU +3963V and in Sc 5/7 to + 3943V. Now perfect match with the old Schottky frequency.

Note: During the crash we found out that the device GECEKD2D did not show proper values. GECEKD2D is responsible for clearing the cooler of slow trapped ions ("clearing electrode").
Hence, the 16V may be due to partial filling of the space charge potential of te elctron beam.
  175   Sat Apr 9 03:46:31 2022 CarstenAcceleratorSlits in TE line
Changed GTEDSAH Rechts to 10mm
  174   Sat Apr 9 03:27:47 2022 PatrickDAQLaser scanning
DAQ1: lxg1927:/data.local2/BeamTimeTh22/
DAQ2: lxg0155:/data.local2/E142/
LMD file name DAQ1:229Thor
LMD file name DAQ2:229Th

Shottky marker pos: 243.973MHz

TimeSIS-intensitycooler-HVLMD-DAQ1LMD-DAQ2scan range(nm)step width(nm)dwell time(s)comments
xx:xxx.xe9209xxx00xx78xx32x.x - 32x.x0.01xsketch for filling the table
04:131.4e920961400937831323.2 - 321.20.014First laser scan this night shift
04:461.3e920961600947832323.2 - 321.20.014
05:171.0e920961700957833323.2 - 321.20.014The laser left the screen between the two loops
05:541.5e920961900977835323.2 - 321.20.014go4 on DAQ2 does not show any events. mbs does not write to file although it is OPEN and the acq is RUNNING
Attachment 1: does_not_write_data_to_file.png
does_not_write_data_to_file.png
  173   Sat Apr 9 02:55:38 2022 CarstenAcceleratorKühlerausfall und Gründe dazu
Wir hatten heute Abend eine Kühlerausfall, der uns mehrere Stunden beschäftigt hat, weil gem. Anzeige in Device Control kein Netzteil mit „rot“ angezeigt/ausgefallen war (siehe unten).
Nach Rufbereitschaft Serge, dann Regina sowie Controls konnte zunächst gefunden werden, dass das Netzteil einer Clearingelektrode (GECEKD2D) keinen korrekten Wert hat. Problem mittels Operateur (Christoph ?) und Rufbereitschaft Contrls gelöst.
Kühler ist trotzdem jedes Mal ausgefallen, wenn man versucht hat, auch nur den geringsten Strom zu ziehen (mit Hilfe Telefonunterstüzung Regina).
Rufbereitschaft Jon.

Mit ihm haben wir dann herausgefunden, dass im Device-Control, bei Auswahl „Kühler“ UND wenn das Fenster nicht vollständig maximiert ist, die letzten drei Netzteile (ECEBG8T, ECEBG3D, ECEBG4D) nicht angezeigt werden und man auch den Scrollbalken nicht dorthin bewegen kann (ergo: nicht vorhanden sind…). Ist das Fenster von DC maximiert, tauche die Geräte wieder auf und ACH WUNDER ECEBG8T (Kollektor) ist rot, lässt sich einfach wieder zuschalten und auch der Rest wieder anschalten. Ein Fehler, den ich leicht hätte selber beheben können, wenn er denn nur angezeigt worden wäre.

Soll heißen: Man weiß zwar, das irgendwo ein Fehler ist, kriegt aber in diesem Modus das Gerät gar nicht angezeigt…
  172   Fri Apr 8 23:56:07 2022 PatrickDAQDAQ improvement
As requested in ID:146 and ID:147, the laserscan tab was improved:
  • The laserscan tab shows each observable plotted against the predefined wavelength setpoints now.

  • The Kobra set wavelength shows the actual setpoints now and not measured wavelengths.

Note: The bins of the laserscan histograms are defined in TLdaAnlProc.cxx, lines 140-142.
At the moment, the histograms are set up for scans in the range 320 - 325 nm and step sizes of 0.01 nm.
If the step size changes or scans that exceed this range are required, these parameters should be adjusted.
Remember to add or subtract half of the step size to your min. and max. wavelength to prevent binning artifacts.
Then of course, also only scan wavelengths which are multiples of your step size.
  171   Fri Apr 8 22:26:44 2022 PatrickDAQSpike in all detectors
In the previous shift, there was a spike in all detectors in the same scan step. Apparently, this was NOT a resonance since in the next step it appeared again but at a different wavelength.
The current hypothesis is, that this is a disruption signal from one of the machines.
  170   Fri Apr 8 17:57:45 2022 KonstantinDAQLaser scanning


TimeSIS-intensity cooler-HV LMD-DAQ1 (R4L-68) LMD-DAQ2 (R4L-41) scan range (nm) step width(nm)dwell time(s) comments
17:28 1.1e9 - 0083 7822 322.3-321.3 0.01 4 Wrong scan range
17:48 1.4e9 209618 0084 7823 322.3-321.3 0.01 4 Wrong scan range
18:10 1.6e9 - 0085 7824 323.2-321.2 0.01 4 acquisition on r4l-68 crashed
18:13 2e9 - 0086 - 323.2-321.2 0.01 4 acquisition on r4l-41 crashed
18:29 1.9e9 209618 0087 7826 323.2-321.2 0.01 4 An artifact is observed at about 644nm <-> 322nm fundamental wavelength
20:17 2e9 209609 0089 7827 323.2-321.2 0.01 4 Cu-mirror and XUV detector are not driven at the moment. It is unclear for how long this was the case. Optimization of the accelerator settings were done before.
21:12 1.6e9 - 0089 7828 323.2-321.2 0.01 4 Laser got wrong pulse widths during this scan and also during the last one.



At about 20:00 the slits were adjusted to the h=1 settings:

NI: 5mm
NA: -3mm
SA: -10mm (also the voltage for the Scitnilator in this pocket was increased to 1500V)
SA_Scraper: +14mm
Attachment 1: Artifacts_in_PMT_MiddleAndNorth.png
Artifacts_in_PMT_MiddleAndNorth.png
  169   Fri Apr 8 17:44:25 2022 KonstantinCalibrationFinal Timing
We measured the timing for the laser bunch synchronization. A summary is given below.

detector time till common stop [bins] time till common stop [ns]
PD North 28 93.33
PD South 63 210
Particle Detector South 14 46.67
Particle Detector North 94 313.33
PMT middle 119 396.67


Using all numbers, the difference between the center of the photodiodes and PMT middle is
given by 245ns, which corresponds to the half revolution period of 256 ns. Difference between the
center of both photodiodes and particle detector south is given by 105 ns.
The delay for the laser trigger is now set correctly.
  168   Fri Apr 8 15:45:24 2022 YL Spectrum manipulation 5
See attached
Attachment 1: IMG_3027.JPG
IMG_3027.JPG
  167   Fri Apr 8 15:42:20 2022 YuriAcceleratorSlits in the TE line
At around 15:00, The slits in the TE line were changed to :
TE4DS5HL -12 mm -> -20 mm
TE5DSAH 0 mm -> +15 mm
  166   Fri Apr 8 15:39:36 2022 allRunsfirst data after timing set up
started taking data again

started at 15:40  
h=1  

file names 
229Th7821 DAQ 1  607 MB
229Th0082 DAQ 2  820 MB 

stopped at 16:25 


The laser was not really properly scanned. 
This was mainly a test run to see if everything was working. 
  165   Fri Apr 8 14:46:02 2022 Danyal & Sebastian & Volker & KenDetectorshigh dark countrate Cu PMT solved
The problem - "discovered" by Volker and Ken - of the high dark countrate of the Cu PMT has been solved. 

(when the Cu mirror was moved in, the dark countrate was very high ... also without ion beam) 

I asked Graziano Savino to check the vacuum gauges along the target side of the ESR (west side). 
The gauges at the laser window sections (which we do not use here!) - NW and SW - were still on. 
Volker remembered that, in the past, for the lowest dark countrate at the Cu PMT --> ALL GAUGES MUST BE SWITCHED OFF. 
Graziano turned them off and Sebastian and I checked the Cu PMT rate in DAQ1. 

Attached you can clearly see the difference: from 7500 cps to 400 cps. 

When the Cu mirror is retracted the dark countrate is 200 cps.  

Danyal

PS The slow increase in one plot is due to the fact that Graziano switched on the light in the ESR. 
Attachment 1: IMG_20220408_082804.jpg
IMG_20220408_082804.jpg
Attachment 2: IMG_20220408_083031.jpg
IMG_20220408_083031.jpg
  164   Fri Apr 8 14:43:50 2022 WilfriedDAQlaser timing - Q-switch start
below are my notes concerning laser timing / Q-switch start
Attachment 1: IMG_20220408_143753_resized_20220408_023840170.jpg
IMG_20220408_143753_resized_20220408_023840170.jpg
  163   Fri Apr 8 14:14:28 2022 KristianDAQDelay of bunch RF
The bunch HF is now fed through a delay to shift the stop trigger relative to the PMT signal. The delay generator is placed directly after the CFG and before splitting the signal for the two DAQs. The relative timing of both DAQs was not changed.
  162   Fri Apr 8 14:12:57 2022 morning shiftDAQtiming for h=1
The timing for h=1 has been set up 

The time window is now twice as large as before! 
This means that we see the same ion bunch twice. 

(150 bins = 1 turn in the ESR) 

The PMT signal is exactly in between two cycles + the extra flight time (3 bins = 10 ns) from target to PMT north. 
Attachment 1: 2022-04-08_timing_h1_final.png
2022-04-08_timing_h1_final.png
  161   Fri Apr 8 12:04:13 2022 RaganRunsNTCAP started
NTCAP is started for the data taking.

Carrier Frequency: 242.02 M
IQ Rate (S/s): 10 M
Reference level (dBm): -30

SC_2022-04-08_12-04-28
\IQ_2022-04-08_12-03-50
Attachment 1: IMG_0947.jpg
IMG_0947.jpg
  160   Fri Apr 8 11:16:57 2022 KristianLaserWavemeter
We changed the fiber to the wavemeter. The third fiber worked best and we could operate the WM at low exposure times, i.e., below the laser repetition rate. We used the neutral density filter to adapt the laser power that only one laser pulse is measured by the WM each time (Exposure time =34ms)

This way, there are no frequency jumps. The jitter is slighly different at each wavelength which was ~5GHz peak to peak.


We optimized the fiber coupler and slightly optimized the jitter to <4GHz.
Attachment 1: Wavemeter.PNG
Wavemeter.PNG
Attachment 2: Wavemeter2.PNG
Wavemeter2.PNG
  159   Fri Apr 8 11:02:04 2022 DW, YL, RSS, SL Change h=2 to h=1
After changing to h=1
The frequency manipulation #5: f=242.021487MHz (124th harmonic) [no bunching]
Manipulation #7: f=242.021812 MHz [with bunching]
  158   Fri Apr 8 10:44:55 2022 Ragan, Yuri, Danyal, SergeyRunsNTCAP stopped
NTCAP is stopped. Sergey will now set an ion bunch instead of two in the ESR.

SC_2022-04-08_09-39-33
\IQ_2022-04-08_09-39-33
  157   Fri Apr 8 09:39:04 2022 RaganRunsNTCAP started
Carrier Frequency: 242.2 M
IQ Rate (S/s): 10 M
Reference level (dBm): -30

SC_2022-04-08_09-39-33
\IQ_2022-04-08_09-39-33
  156   Fri Apr 8 09:33:52 2022 Dayshift 1 8.4.2022 Reference Measurements
DAQ1: lxg1297:/data.local2/BeamTimeTh22/
DAQ2: lxg0155:/data.local2/E142/
LMD file name DAQ1:229Thor
LMD file name DAQ2:229Th

center freq. 242.2M, 10MIQs, -30dBm
Shottky marker pos: 243.973MHz

TimeSIS-intensitycooler-HVLMD-DAQ1LMD-DAQ2scan range(nm)step width(nm)dwell time(s)comments
09:30??20961400797817323.2-321.20.0142 loops
10:152.3e920961100817820321.0-320.00.018just 1 loop, aborted 2nd loop and started from 320.5-320.4 in 0.005 steps and 10s dwell time (300), started again from 320.5-320.4 in 0.005 steps and 10s dwell time (300)


We crosschecked the last measurements from the nightshift for reference measurements.
Now the ESR group start switching to 1 bunch.
  155   Fri Apr 8 09:32:32 2022 RaganRunsNTCAP stopped
Since there is no beam, NTCAP is stopped.

Carrier Frequency: 242.2 M
IQ Rate (S/s): 10 M
Reference level (dBm): -30

SC_2022-04-07_23-53-47
\IQ_2022-04-07_23-53-47
  154   Fri Apr 8 09:13:38 2022 Ragan, DanyalAcceleratorNo beam
Cathode is being changed at the ion source. So no beam for the moment.

Sergey has been contacted to change from two ion bunches to a single ion bunch in the ESR.
  153   Fri Apr 8 08:40:06 2022 SebastianDAQDAQ improvement
Concerning ID 146 a new histogram for accumulating data (no cleaning histograms) can be found under

Step2_Anl/TDC/TDC***_accumulated_***
  152   Fri Apr 8 08:17:52 2022 SebastianLaserLaser Ext Trig is working
We (Max, Kristian, Danyal, me) fixed the "external trigger" problem.

1.) The delay between lamp sync and Q-switch trigger was too long. The delay must be 200µs (3rd picture)! 

2.) The settings from the left Dual Timer (upper and lower part) in the ESR Laser Lab (above QuantaRay laser) were wrong and are now adjusted. Settings are depicted in the attached photos (1st and 2nd pic).

4th picture shows the pulse train of the pump laser.
Attachment 1: upperDualTimerSettings.JPG
upperDualTimerSettings.JPG
Attachment 2: lowerDualTimerSettings.JPG
lowerDualTimerSettings.JPG
Attachment 3: LampSyncToQSwitchTrig.JPG
LampSyncToQSwitchTrig.JPG
Attachment 4: TriggerPulseTrain.JPG
TriggerPulseTrain.JPG
  151   Fri Apr 8 06:53:29 2022 RaganRunsNTCAP data taking
NTCAP is taking data since 07.04.2022 23:53:47

Carrier Frequency: 242.2 M
IQ Rate (S/s): 10 M
Reference level (dBm): -30

SC_2022-04-07_23-53-47
\IQ_2022-04-07_23-53-47
Attachment 1: IMG_0936.jpg
IMG_0936.jpg
  150   Fri Apr 8 05:46:35 2022 V. HannenDetectorsHigh background rate in Cu PMT points to light leak in ESR or active pressure gauge
The background rate of the Cu mirror PMT is only about 300 cps when the mirror is in the parking position but ca. 7000 cps when in the beam position, even if no beam is present in the ESR. This was noticed when we had an "empty injection" into the ring, causing the Cu mirror to drive into the beam position with no ions present.

This means either we have a light leak somewhere on the detector side of the ring, e.g. a not perfectly covered window, or we have a pressure gauge operating still to close by (during the LIBELLE experiment we turned off all pressure gauges on the detector side of the ESR not only in the straight section but also somewhat into the bends). This has to be checked the next time we can enter the ring.
  149   Fri Apr 8 03:54:39 2022 PatrickLaserQ-switch window
The solution of increasing the Q-switch window from 2us to 5us described in ID:148 fulfills its purpose, but the window is unstable.
We saw the laser jumping across the screen which was because the Laser had a lot of hickups.
The hickups come from the signal which determines the duration of the window.
This window "flickers". It gets very small, leaving no time for coincident events which fire the laser.
This is probably an issue with the NIM module.
Compare the picture below: The oscilloscope freezes and only the first of the yellow pulses is visible which should repeat and span 5us at the moment.

After looking at the different signals to trigger the laser on the oscilloscope, the laser does not fire anymore when used in the external trigger mode.
However, all signals are looking good and everything should be in the same state as before.
The internal Q-switch works as good as before.
Attachment 1: 2022-04-08_Q-switch_window.jpg
2022-04-08_Q-switch_window.jpg
  148   Fri Apr 8 02:14:05 2022 WilfriedLaserLaser timings adjusted
Since we use the middle window as a reference for the laser pulse timing, the fact that the window is 2.25 m behind the target has to be taken into account. From here the ions have 10 ns less time of flight to the middle of the electron cooler than they need for half a revolution. The signals were still symmetrically aligned around the reference bunch as it was done yesterday. Therefore, the delay of the laser pulse was reduced by 10-ns on the oscilloscope, which led both photodiode histograms move 3 bins further to the right (towards larger times till common stop, since the pulse arrives earlier).

Since the RF frequency is turned down from ~ 1 MHz to ~ 400 kHz during injection/preparation, the laser does not fire reliably and the beam stabilization does not work very well during this period. This was solved by increasing the window in which the Q-Switch signal is accepted from 2 microseconds to 5 microsececonds. The laser is now firing regularly and with high power also during the preparation time and the beam position stabilization works very well.
  147   Fri Apr 8 01:48:57 2022 PatrickDAQBugged Trending plots?
The wavelengths/frequencies shown in the graph in the labview window do not match the wavelengths/frequencies in go4.
Compare the picture which shows an incomplete laser scan although the scans in the labview window are completed (The measurement was started at an 'elapsed MBS time' of 2700s and took 1700s/28min).
However, the displayed time is correct. Only the data seems to be "stretched".

The same is true for the 'XUV anode' detector. The counter in the electronic module is ahead of the displayed count rate in go4.


Additional Note: The 'Cobra set wavelength' plot shows wavelengths which seem to be measured. However, we would expect deterministic setpoints from the software, see picture.
Attachment 1: 2022-04-08_Cobra_set_wavelength.png
2022-04-08_Cobra_set_wavelength.png
  146   Fri Apr 8 01:18:51 2022 Ken UeberholzDAQTODO: DAQ improvements
For somebody who knows the DAQ1 code: Go4 resets the histograms with each laser step. Can there be additional histograms where the data gets accumulated?

And possibly a histogram where important detectors are plotted against the laser steps? The read back wavelength of the wavemeter is not very precise. 
  145   Fri Apr 8 00:06:37 2022 PatrickLaserConnection to the laser pc
To login to the laser pc use the command

xfreerdp -g 1920x1080 -u atplaser atppc023.campus.gsi.de
  144   Thu Apr 7 22:18:06 2022 Night shift 7.4-8.4 Next scans
DAQ1: lxg1927:/data.local2/BeamTimeTh22/
DAQ2: lxg0155:/data.local2/E142/
LMD file name DAQ1:229Thor
LMD file name DAQ2:229Th

Shottky and NTCAP started at 23:53, center freq. 242.2M, 10MIQs, -30dBm
Shottky marker pos: 243.973MHz

TimeSIS-intensitycooler-HVLMD-DAQ1LMD-DAQ2scan range(nm)step width(nm)dwell time(s)comments
00:201.4e92096170065-00677810323.2-321.20.014buggy DAQ? see Elog, file 0068 empty
01:271.6e92096060069-00707811323.2-321.20.014buggy DAQ? see Elog, file 0071 empty
02:151.6e92096110072-00737812323.2-321.20.014buggy DAQ? see Elog, file 0074-0075, 7813-7814 empty
03:001.1e9?0076-00777815323.2-321.20.014buggy DAQ? see Elog and below, file 0078, 7816 empty




We were searching for a difference of a factor of twoin both DAQs. It turns out that the default value for the MBSstream server task is scale=2. In the main task this value is explicately set to scale=1. we will now (starting with filenumber: 0078) restart the 2nd DAQ with set stream_serv scale=1.

Also TDC is disabled.
From file number 0076 in DAQ2 : ADC thresholds:
unsigned short caen_V785AH_threshold_mod0 [32] =
{0x0100 , 0x0005 , 0x0004 , 0x0003 , 0x0004 , 0x0003 , 0x0005 , 0x0003 ,
0x0005 , 0x0004 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 ,
0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 ,
0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 , 0x0100 };


Before the next scan, we realized, that the laser destabilized. For the rest of the shift we tried to get laser back online (see ID:149).
  143   Thu Apr 7 19:13:26 2022 Konstantin, PatrickCalibrationHow to find the correct laser position
In order to achieve the correct laser ion beam superposition one needs to do the following steps:


  1. If the laser stabilization is still running, turn both stages off and block the main amplifier.
  2. Ensure that the laser spot is centered on the paper screen, which is located in top of the laser tower in the south (ATTENTION: please only use the preamplifier and not the main amplifier!!! If you're unsure what you are doing please contact Rodolfo or Konstantin).

  3. If this is not the case and the beam is completely off, have a look at the MRC Stabilization system. If it is running, close the software and turn the hardware off and on again. The spot will leave its position and come back after the stabilization is turned on again.
  4. If it is still not centered, use and only use the piezo mirror (the one with red screws) to bring back the spot.

  5. Remove the paper screen and then turn on the main amplifier.

  6. Restart the software and put in the values from the file 07-04-2022(...).png. Start the two stabilization stages in the software. The laser spot should move back to the correct position. Smile
  142   Thu Apr 7 16:50:22 2022 KonstantinCalibrationSpacial laser-ion overlap
Laser-ion-beam overlap was achieved after measuring the ion beam positions (compare Entry 83).
Screenshots are comprised in the following table.

scraper position screenshot
GECEDS1HA -8.6 mm Laser beam scraped from the left
GECEDS1HA -17.4 mm Laser beam scraped from the right
GECEDS2HA -13.4 mm Laser beam scraped from the right
GECEDS2HA -4.6 mm Laser beam scraped from the left
GECEDS2VU 7.7 mm Laser beam scraped from the top
GECEDS2VU -1.3 mm Laser beam scraped from the bottom
GECEDS1VU -0.9 mm Laser beam scraped from the bottom
GECEDS1VU 8.1 mm Laser beam scraped from the top
  141   Thu Apr 7 16:45:10 2022  DetectorsDetector distances
Relativ distances of the detector 
Attachment 1: 20220407_164345.jpg
20220407_164345.jpg
  140   Thu Apr 7 15:18:25 2022 Danyal & SebastianDAQDAQ channels
We checked again the cables for both DAQs 
(on Carsten's kind request) 


Channels for both DAQs are: 

0 XUV-Back 
1 XUV-Anode 
2 XUV-Anode-delayed 
3 PMT-South (new PMT, new threshold)
4 PMT-Middle 
5 PMT-North 
6 PMT-Cu 
7 Part-det-south 
8 Part-det-north 
9 - 
10 - 
11 - 
12 - 
13 PD-NO
14 PD-SO
15 Q-switch 
  139   Thu Apr 7 14:13:27 2022 DanyalDetectorsnew PMT south
I have replaced the PMT south (looks at the gas target). 
in the hope that this will produce less dark counts. 
Thus far, the dark countrate is low (few Hz). 

brand: ET enterprises 
type:  2" photomultiplier, 9423B 
High voltage: -2.45 kV  (up to -3.5 kV) 
spectral range: 110 - 230 nm 

The power comes from an additional 2.5 kV supply. 
(I have changed the cable: was CH0 before) 
  138   Thu Apr 7 14:04:36 2022 Paul IndelicatoGeneralno beam until 17:00
10:10  There is a problem with the UNILAC. 
The repair will take several hours. (4 hrs?) 

14:00  We just enquired about the status and when beam could be back. 
The current estimate is 17:00.

More work on laser aligment is required. 
Estimated time: 1 hour
  137   Thu Apr 7 14:01:22 2022 Sebastian, MaxDetectorsMesytec reset
The Mesytec crate was turned off and on again.

It is again possible to communicate with the XUV detector via python to apply voltage and current.
  136   Thu Apr 7 11:11:31 2022 Max, SebastianLaserdye changed, pulse energy measurements
We changed the dye at 10am.

We increased the pump power for the dye Laser to 480mJ (before 450mJ). New calibration factor is 29 for Quanta Ray monitor signal.

We get now 17mJ UV pulse energy after SHG. Pulse energy before was 14mJ.
  135   Thu Apr 7 10:10:31 2022 Ragan, Yuri, DanyalAcceleratorProblem in UNILAC
The power supply of the UNILAC magnet is broken. The repair will take up to 6-7 hours.
  134   Thu Apr 7 09:58:55 2022 Ragan, Yuri, DanyalAcceleratorKicker problem solved
The kicker problem is solved and the beam is back in the ESR.
  133   Thu Apr 7 09:23:18 2022 SebastianDAQDAQ1 & DAQ2 - 1kHz and delayed cs removed
Questionable 1kHz and delayed common stop signals has been removed.

These two cablings were for some previous tests.
  132   Thu Apr 7 08:43:19 2022 Danyal, Yuri, RaganAcceleratoragain no injection in ESR - ESR kicker problem
we had no injections in the ESR again 

it turned out that the injection kicker of the ESR has a problem 
  131   Thu Apr 7 08:14:03 2022 Yuri & DanyalGeneral229Th89+ line in Schottky
GLOBAL calculations for the "content" of the Th line in the Schottky spectrum
(380 MeV/u exit energy, equilibrium charge state distribution)

Actinium 9.9%  - bare 

Thorium 42.4% - H-like

Protactinium 44.8% - He-like

Uranium 2.7% - Li-like 
  130   Thu Apr 7 07:40:09 2022 Danyal, Max, SebastianDAQNo beam and DAQs crashed
since shortly after 7 AM we have no beam in the ESR
(reason unclear) 

Both DAQs also crashed. 

Beam back in ESR at 7:20 or so 

Problems with restarting DAQ1 

Problems with restarting DAQ2 

Files names 7801 and 7804 and 0047 and 0050 cannot be used
  129   Thu Apr 7 05:55:17 2022 Ken UeberholzDetectorsXUV-Detector Mesytec crash
When the XUV-detector has to shut down unexpectedly, it can happen that the Mesytek power supply crashes and can't be 
communicated with. If this happens the Mesytec PS needs to be restarted from hand inside of the ESR. This can be done by 
restarting the crate located at the bottom of the XUV-detector. 

This crash happened during the night shift today and the Mesytec should be restarted today as soon as possible. For 
example when the laser stabilization gets fixed.

In normal operation this should never happen if no mistakes are made. 
  128   Thu Apr 7 05:44:40 2022 Pierre-Michel, RaganDAQNTCAP settings
Carrier Frequency: 244M
IQ Rate: 10M
reference Level: -30
RF - Attenuation: 40
IF - Attenuation: 19.9288

Masterpath p:\E142\sc
Masterpath p:\E142\IQ

Display: No Display

NTCAP data-taking is stopped at 5:44.

IQ_2022-04-07_02-40-05
SC_2022-04-07_02-40-05
  127   Thu Apr 7 05:23:50 2022 PatrickDAQHow To Start MBS for DAQ2 (Carstens DAQ)
(MBS server should be running at the LXG0155 machine. If not you will get an error message. Then start the server - last command in console)

Just enter the following commands in the console of any PC

ssh stoe_exp@r4l-68
*** Password on a sheet of paper ***
resl
cd /esr/usr/stoe_exp/E142Brandau/SCA... (auto complete with tab)
mbs
@startup
connect rfio lxg0155 -disk
open file lxg0155:/data.local2/E142/229Th -auto -rfio
sta ac




To stop MBS enter the following commands

sto ac
close file
disconnect rfio
@shutdown
exit
resl
  126   Thu Apr 7 04:48:58 2022   ToDo's for 07.04.
Some ToDo's for the next shift:
- Work on  Laser stabilisation 2nd stage in the ESR
- Mesytec power supply of the xuv-detector crashed and needs to be restarted in the ESR. Simply turning it the crate off and on again)!!
- Fix wavemeter fluctuates
- Compare MBS event size of DAQ 1 ("by laser group") and DAQ 2 ("by Carsten"), DAQ 1 data size was ~2 times larger than DAQ 2 data size.
- Use lmd-files measured last night to test Go4-Analysis.
- Practice measurement procedure with beam, see Message ID: 124.
  125   Thu Apr 7 04:10:18 2022 Ken UeberholzDAQCorrected cabling DAQ 2
A lot of cables were wrongly or not 
connected to the DAQ 2. 

Channels are now for both DAQ:
0 XUV-Back
1 XUV-Anode
2 XUV-Anode-delayed
3 PMT-South
4 PMT-Middle
5 PMT-North
6 PMT-Cu
7 Part-det-south
8 Part-det-north
9 1kHz
10 -
11 -
12 Delay-common-stop
13 PD-NO
14 PD-SO
15 Q-switch

All data taken by the DAQ2 has to be 
considered as faulty up to now. 

Carsten was furious.
Attachment 1: 20220407_043337.jpg
20220407_043337.jpg
  124   Thu Apr 7 03:44:21 2022 PatrickDAQMeasurement procedure
Measurement procedure


- The laser hits the screen 'NO' (atppc017) right side of the burn spot
- Be ready to start a laser scan
- Scan laser goes into wavemeter!
- Have mbs connected
- Have go4 connected

Preparation done

- 'open file (...)' for DAQ1 & DAQ2
- request a new beam
- check scraping
- 'sta ac' for DAQ1 & DAQ2
- start laser scan

laser scan started

- 'sh ac' for DAQ1 & DAQ2
- check that acquisition is RUNNING and file is OPENED
- fill in table information in the ELOG.

laser scan complete

- 'sto ac' for DAQ1 & DAQ2
- 'close file'
- check if preparation is still fulfilled
- repeat from Preparation done
  123   Thu Apr 7 03:09:36 2022 CarstenDAQNTCAP running since 02:40
  122   Thu Apr 7 03:06:15 2022 PatrickDAQDAQ file sizes
The file sizes of DAQ1 (229Thor) and DAQ2 (229Th, "Carstens DAQ") are different.
During 20min of laser scanning DAQ1 saves 4 files while DAQ2 saves 2 files which was 3.3 GB and 2 GB, respecively.
The file sizes of DAQ2 should always be greater than those of DAQ1, because of extra ADC data!

The problem seems to be solved after the recabling ID: 125.
  121   Thu Apr 7 02:32:29 2022 all on shiftRunsFirst Scans 322-320nm
Laser scanning from 322-320 steps 0.01nm/s
DAQ1: lxg1927:/data.local2/BeamTimeTh22/
DAQ2: lxg0155:/data.local2/E142/
LMD file name DAQ1:229Thor
LMD file name DAQ2:229Th

TimeSIS-intensitycooler-HVLMD-DAQ1LMD-DAQ2
02.30??Th227781-Th2277840027-0028
03.031.75e92096487785-77870029-0030
03:281.7e920964877880031 (stopped during scan)
Break - fixing cables, Elog ID: 125
04:00 - problems with UNILAC, stopping for now.
Apparently not so bad problems. we can continue.
Mesytek PS of xuv-detector crashed, can only be restarted from inside the ESR by turning the crate on and off.
05.201.23e92096467791-77940035-0038
05.521.5e92096487795-77970039-0042
06.241.5e92096427798-78000043-0046 1 sec waiting at each laser frequency (dwell time 30)
07.36 xx e9209 xx 7803-78040047-0050 problems with DAQ 1 and DAQ2
07.52 xx e9209646 7805-78090051-0055 DAQs started again 5 sec waiting at each laser frequency (dwell time 150)
08.30 e9209 xx 7810-780056-00 DAQs started again 5 sec waiting at each laser frequency (dwell time 150)
  120   Thu Apr 7 01:19:05 2022 PatrickLaserLaser scanning
We did some laser scans. The wavemeter shows spikes during scans. This may be just while the frequency changes. See picture.
Attachment 1: 2022-04-07_Wavemeter_during_scan.png
2022-04-07_Wavemeter_during_scan.png
Attachment 2: 2022-04-07_Wavemeter_during_scan2.png
2022-04-07_Wavemeter_during_scan2.png
Attachment 3: 2022-04-07_Wavemeter_during_scan3.png
2022-04-07_Wavemeter_during_scan3.png
Attachment 4: 2022-04-07_Wavemeter_during_scan4.png
2022-04-07_Wavemeter_during_scan4.png
  119   Thu Apr 7 00:36:36 2022 UweDAQThreshholds and shaping Mesytec for ADC
Attachment 1: snapshot3.png
snapshot3.png
  118   Thu Apr 7 00:15:11 2022 PatrickLaserLaser timing adjusted
We have adjusted the laser timing using PMT-middle. Bunching freq. is 3.90362 MHz.

PD NO: 7.79
PD SO: 43.37
mean: 25.08

PMT middle: 25.02

Delta = 0.6 bins * 3.3 ns = 0.2 ns

New injection:
PMT middle: 25.48 / 101.91
ParDet south: 74.31 / 151.31

ParDet south - PMT middle (furthest / closest distance) = 161.1 ns / 91.1 ns
Attachment 1: 220407-Laser-ion-timing.png
220407-Laser-ion-timing.png
Attachment 2: 220407-Laser-ion-timing-full-period.png
220407-Laser-ion-timing-full-period.png
Attachment 3: 220407-ParDetSO_PMT-middle.png
220407-ParDetSO_PMT-middle.png
  117   Wed Apr 6 22:29:55 2022 PatrickAcceleratorECooler voltages
ECooler voltages:

06.04:
22:30: 209676 V
00:14: 209647 V

07.04.:
00:46: 209647 V
04:06: 209648 V
  116   Wed Apr 6 21:03:25 2022 Ken Ueberholz DetectorsXuv-Detektor, further information
Some further information regarding the 
xuv-detector and its components.
Attachment 1: xuv_detektor.pdf
xuv_detektor.pdf xuv_detektor.pdf xuv_detektor.pdf xuv_detektor.pdf xuv_detektor.pdf xuv_detektor.pdf xuv_detektor.pdf xuv_detektor.pdf
  115   Wed Apr 6 19:39:08 2022 Ken Ueberholz DetectorsLED installed
The UV-LED of Münster was connected over 
channel 8 to the Messhütte. 6V are 
supplied by the power supply (picture 2). 
The Led is located at the xuv detector 
(picture 1).
Attachment 1: 20220406_193541.jpg
20220406_193541.jpg
Attachment 2: 20220406_193439.jpg
20220406_193439.jpg
  113   Wed Apr 6 18:51:33 2022 Danyal & CarstenAcceleratortarget bump
This afternoon, we found out that Sergey has also implemented a "target bump". 
Although we do not use a target, this bump is still convenient because 
we can move the ion beam such that is passes perfectly through the Cu mirror. 

The setting is -8 mm and 1.3 mrad  (if I am not mistaken) 
We tested the effect on the position of the ion beam using the 
horizontal scrapers at the target: GEEXDS1HA and GEEXDS2HA. 

With the target bump set to "zero" (0 mm and 0 mrad), 
the ion beam passed 6-8 mm to the outside. 
This way, it will e.g. not pass centrally through the slit in the Cu mirror. 


With the target bump set to -8 mm and 1.3 mrad, which is the default setting, the ion beam passed centrally. 
Therefore, we left the target bump like this. 
  112   Wed Apr 6 16:01:07 2022 BLAcceleratorESR settings before adjusting laser: 2022-04-06_14-37-30_ESR_EXP22_02_238U92_Brandau_30March22.C1.txt
# Version: 1.2
# Comment: ParamModi Export at 2022-04-06T14:37:35.957978+02:00[Europe/Berlin]
# Context: ESR_EXP22_02_238U92_Brandau_30March22.C1
# Columns: PARAMETERNAME,VALUE,UNIT,BEAMPROCESSPURPOSE
LOGICAL.GE01MU4I/MSEP_HKICK_S,0.0055,rad,RING_INJECTION
LOGICAL.GE01QS8F/K1L,0.392284,1/m,RING_INJECTION
LOGICAL.GE01QS8F/K1L,0.392284,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS8F/K1L,0.392284,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS8F/K1L,0.392284,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS9D/K1L,-0.4256532,1/m,RING_INJECTION
LOGICAL.GE01QS9D/K1L,-0.4256532,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS9D/K1L,-0.4256532,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS9D/K1L,-0.4256532,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01KY4/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE01KY4/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KY4/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KY4/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KY1/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE02KY1/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KY1/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KY1/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX1/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE02KX1/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX1/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX1/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX1/HKICK_ECB,-0.0020715533,rad,RING_INJECTION
LOGICAL.GE02KX2/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE02KX2/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX2/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX2/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX2/HKICK_ECB,-3.000492E-4,rad,RING_INJECTION
LOGICAL.GE02KS1/K2L,-0.189870882,1/m²,RING_INJECTION
LOGICAL.GE02KS1/K2L,-0.189870882,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE02KS1/K2L,-0.189886682,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE02KS1/K2L,-0.189886682,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE02KS2/K2L,0.139882922,1/m²,RING_INJECTION
LOGICAL.GE02KS2/K2L,0.139882922,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE02KS2/K2L,0.139886222,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE02KS2/K2L,0.139886222,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE02KY2/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE02KY2/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KY2/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KY2/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02DD2_G/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION1_S,-0.129,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION1_S,-0.129,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION1_S,-0.02,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION1_S,-0.02,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION1_S,-0.02,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION1_S,-0.129,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION1_S,-0.129,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION1_S,-0.1,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION1_S,-0.1,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION2_S,-0.129,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION2_S,-0.129,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION2_S,-0.02,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION2_S,-0.02,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION2_S,-0.02,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION2_S,-0.129,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION2_S,-0.129,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION2_S,-0.1,m,RING_INTERMEDIATE
LOGICAL.GE02DD2_G/PPOS_POSITION2_S,-0.1,m,RING_INTERMEDIATE
LOGICAL.GE02MK/KICKER_HKICK_S,-0.005,rad,RING_INJECTION
LOGICAL.GE02KX3/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE02KX3/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX3/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX3/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX4/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE02KX4/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX4/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX4/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION1_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION1_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION1_S,0.014,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION1_S,0.014,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION1_S,0.014,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION1_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION1_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION1_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION1_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION2_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION2_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION2_S,0.014,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION2_S,0.014,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION2_S,0.014,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION2_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION2_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION2_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE02DS3HG/PPOS_POSITION2_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE02KY3/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE02KY3/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KY3/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KY3/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KS3/K2L,0.139882922,1/m²,RING_INJECTION
LOGICAL.GE02KS3/K2L,0.139882922,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE02KS3/K2L,0.139886222,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE02KS3/K2L,0.139886222,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE02KS4/K2L,-0.189870882,1/m²,RING_INJECTION
LOGICAL.GE02KS4/K2L,-0.189870882,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE02KS4/K2L,-0.189886682,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE02KS4/K2L,-0.189886682,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE02KX5/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE02KX5/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX5/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX5/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX5/HKICK_TAB,-0.002652,rad,RING_INJECTION
LOGICAL.GE02KX6/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE02KX6/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX6/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX6/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KX6/HKICK_TAB,0.001651,rad,RING_INJECTION
LOGICAL.GE02KY4/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE02KY4/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KY4/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE02KY4/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GEEXDS1HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEEXDS1HG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GEITKX1/K0L_SPEC_S,1.047198,rad,RING_INJECTION
LOGICAL.GEITQT11/K1L_SPEC_S,-0.293044,1/m,RING_INJECTION
LOGICAL.GEITQT12/K1L_SPEC_S,0.820468,1/m,RING_INJECTION
LOGICAL.GEITQT13/K1L_SPEC_S,-0.293044,1/m,RING_INJECTION
LOGICAL.GEITKX2/K0L_SPEC_S,1.047198,rad,RING_INJECTION
LOGICAL.GEEXDD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION1_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION1_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION1_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION1_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION1_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION1_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION1_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION1_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION1_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION2_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION2_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION2_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION2_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION2_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION2_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION2_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION2_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GEEXDD2IG/PPOS_POSITION2_S,0.125,m,RING_INTERMEDIATE
LOGICAL.GE01KY1/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE01KY1/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KY1/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KY1/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01QS0D/K1L,-0.4256532,1/m,RING_INJECTION
LOGICAL.GE01QS0D/K1L,-0.4256532,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS0D/K1L,-0.4256532,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS0D/K1L,-0.4256532,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS1F/K1L,0.392284,1/m,RING_INJECTION
LOGICAL.GE01QS1F/K1L,0.392284,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS1F/K1L,0.392284,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS1F/K1L,0.392284,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01DD1IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD1IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION1_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01DD3IG/PPOS_POSITION2_S,0.1,m,RING_INTERMEDIATE
LOGICAL.GE01KX1/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE01KX1/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX1/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX1/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX1/HKICK_TAB,-0.001651,rad,RING_INJECTION
LOGICAL.GE01KX2/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE01KX2/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX2/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX2/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX2/HKICK_TAB,0.002652,rad,RING_INJECTION
LOGICAL.GE01MU1/K0L,1.04719755,rad,RING_INJECTION
LOGICAL.GE01MU1/K0L,1.04719755,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01MU1/K0L,1.04719755,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01MU1/K0L,1.04719755,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01QS2F/K1L,0.2845252,1/m,RING_INJECTION
LOGICAL.GE01QS2F/K1L,0.2845252,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS2F/K1L,0.2845252,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS2F/K1L,0.2845252,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01KS1/K2L,-0.189870882,1/m²,RING_INJECTION
LOGICAL.GE01KS1/K2L,-0.189870882,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE01KS1/K2L,-0.189886682,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE01KS1/K2L,-0.189886682,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE01QS3D/K1L,-0.5744116,1/m,RING_INJECTION
LOGICAL.GE01QS3D/K1L,-0.5744116,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS3D/K1L,-0.5744116,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS3D/K1L,-0.5744116,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS4F/K1L,0.34865,1/m,RING_INJECTION
LOGICAL.GE01QS4F/K1L,0.34865,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS4F/K1L,0.34865,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS4F/K1L,0.34865,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01KS2/K2L,0.139882922,1/m²,RING_INJECTION
LOGICAL.GE01KS2/K2L,0.139882922,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE01KS2/K2L,0.139886222,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE01KS2/K2L,0.139886222,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE01KY2/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE01KY2/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KY2/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KY2/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01DD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION1_S,0.127,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION1_S,0.127,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION1_S,0.005,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION1_S,0.005,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION1_S,0.005,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION1_S,0.127,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION1_S,0.127,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION1_S,0.127,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION1_S,0.127,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION2_S,0.127,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION2_S,0.127,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION2_S,0.005,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION2_S,0.005,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION2_S,0.005,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION2_S,0.127,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION2_S,0.127,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION2_S,0.127,m,RING_INTERMEDIATE
LOGICAL.GE01DD2IG/PPOS_POSITION2_S,0.127,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/ACTIVE_S,true,,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION1_S,-0.126,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION1_S,-0.126,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION1_S,-0.005,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION1_S,-0.005,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION1_S,-0.005,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION1_S,-0.126,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION1_S,-0.126,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION1_S,-0.125,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION1_S,-0.125,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION2_S,-0.126,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION2_S,-0.126,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION2_S,-0.005,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION2_S,-0.005,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION2_S,-0.005,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION2_S,-0.126,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION2_S,-0.126,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION2_S,-0.125,m,RING_INTERMEDIATE
LOGICAL.GE01DD2AG/PPOS_POSITION2_S,-0.125,m,RING_INTERMEDIATE
LOGICAL.GE01MU5L/MSEP_HKICK_S,0.0,rad,RING_INJECTION
LOGICAL.GE01MU5L/MSEP_HKICK_S,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01MU5L/MSEP_HKICK_S,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01MU5L/MSEP_HKICK_S,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01MU5L/MSEP_K0L_THEO_S,0.0,rad,RING_INJECTION
LOGICAL.GE01MU5L/MSEP_K0L_THEO_S,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01MU5L/MSEP_K0L_THEO_S,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01MU5L/MSEP_K0L_THEO_S,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX3/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE01KX3/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX3/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX3/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX4/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE01KX4/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX4/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX4/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/ACTIVE_S,false,,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION1_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION1_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION1_S,0.014,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION1_S,0.014,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION1_S,0.014,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION1_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION1_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION1_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION1_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION2_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION2_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION2_S,0.014,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION2_S,0.014,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION2_S,0.014,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION2_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION2_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION2_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE01DS3HG/PPOS_POSITION2_S,-0.13,m,RING_INTERMEDIATE
LOGICAL.GE01KY3/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE01KY3/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KY3/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KY3/VKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KS3/K2L,0.139882922,1/m²,RING_INJECTION
LOGICAL.GE01KS3/K2L,0.139882922,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE01KS3/K2L,0.139886222,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE01KS3/K2L,0.139886222,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE01QS5F/K1L,0.34865,1/m,RING_INJECTION
LOGICAL.GE01QS5F/K1L,0.34865,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS5F/K1L,0.34865,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS5F/K1L,0.34865,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS6D/K1L,-0.5744116,1/m,RING_INJECTION
LOGICAL.GE01QS6D/K1L,-0.5744116,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS6D/K1L,-0.5744116,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS6D/K1L,-0.5744116,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01KS4/K2L,-0.189870882,1/m²,RING_INJECTION
LOGICAL.GE01KS4/K2L,-0.189870882,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE01KS4/K2L,-0.189886682,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE01KS4/K2L,-0.189886682,1/m²,STORAGE_MANIP_WAIT
LOGICAL.GE01QS7F/K1L,0.2845252,1/m,RING_INJECTION
LOGICAL.GE01QS7F/K1L,0.2845252,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS7F/K1L,0.2845252,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01QS7F/K1L,0.2845252,1/m,STORAGE_MANIP_WAIT
LOGICAL.GE01KX5/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE01KX5/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX5/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX5/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX5/HKICK_ECB,-0.0022109508,rad,RING_INJECTION
LOGICAL.GE01KX6/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GE01KX6/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX6/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX6/HKICK_COC,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GE01KX6/HKICK_ECB,0.0025045533,rad,RING_INJECTION
ESRB2B/B2B_TRIGGER_OFFSET_S,8.0,deg,RING_INJECTION
ESRBEAM/BUCKETFILL_RAW_S,[[0.0, 0.0]],,RING_INJECTION
ESRBEAM/BUCKETFILL_RAW_S,[[0.0, 0.0]],,RING_BUNCHING
ESRBEAM/BUCKETFILL_RAW_S,[[0.0, 0.0]],,RING_RF_MANIPULATION
ESRBEAM/BUCKETFILL_RAW_S,[[0.0, 0.0]],,RING_INTERMEDIATE
ESRBEAM/BUCKETFILL_RAW_S,[[0.0, 0.0]],,RING_REBUNCHING
ESRBEAM/BUCKETFILL_RAW_S,[[0.0, 0.0]],,RING_RAMP
ESRBEAM/BUCKETFILL_RAW_S,[[0.0, 0.0]],,RING_INTERMEDIATE
ESRBEAM/BUCKETFILL_RAW_S,[[0.0, 1.0]],,RING_INTERMEDIATE
ESRBEAM/BUCKETFILL_RAW_S,[[1.0, 1.0]],,RING_INTERMEDIATE
ESRBEAM/BUCKETFILL_RAW_S,[[1.0, 1.0]],,RING_INTERMEDIATE
ESRBEAM/BUCKETFILL_RAW_S,[[1.0, 1.0]],,RING_INTERMEDIATE
ESRBEAM/BUCKETFILL_RAW_S,[[1.0, 1.0]],,RING_RF_MANIPULATION
ESRBEAM/BUCKETFILL_RAW_S,[[1.0, 1.0]],,RING_INTERMEDIATE
ESRBEAM/BUCKETFILL_RAW_S,[[1.0, 1.0]],,RING_INTERMEDIATE
ESRBEAM/BUCKETFILL_RAW_S,[[1.0, 0.0]],,RING_INTERMEDIATE
ESRBEAM/CH_END_S,0.0,,RING_INJECTION
ESRBEAM/CH_END_S,1.0E-4,,RING_RAMP
ESRBEAM/CV_END_S,0.0,,RING_INJECTION
ESRBEAM/CV_END_S,1.0E-4,,RING_RAMP
ESRBEAM/DELTAR,0.0,m,RING_INJECTION
ESRBEAM/DELTAR,0.0,m,RING_INTERMEDIATE
ESRBEAM/DELTAR,0.0,m,STORAGE_MANIP_WAIT
ESRBEAM/DELTAR,0.0,m,RING_INTERMEDIATE
ESRBEAM/DELTAR,0.0,m,STORAGE_MANIP_WAIT
ESRBEAM/DELTAR,0.0,m,RING_INTERMEDIATE
ESRBEAM/DELTAR,0.0,m,RING_INTERMEDIATE
ESRBEAM/DELTAR,0.0,m,RING_INTERMEDIATE
ESRBEAM/DELTAR,0.0,m,STORAGE_MANIP_WAIT
ESRBEAM/DELTAR,0.0,m,RING_INTERMEDIATE
ESRBEAM/DELTAR,0.0,m,RING_INTERMEDIATE
ESRBEAM/DELTAR,0.0,m,RING_INTERMEDIATE
ESRBEAM/DELTAR,0.0,m,RING_INTERMEDIATE
ESRBEAM/DPFREV,0.0,,RING_INJECTION
ESRBEAM/DPFREV,0.0,,RING_BUNCHING
ESRBEAM/DPFREV,0.0,,RING_RF_MANIPULATION
ESRBEAM/DPFREV,0.0,,RING_INTERMEDIATE
ESRBEAM/DPFREV,0.0,,RING_REBUNCHING
ESRBEAM/DPFREV,0.0,,STORAGE_MANIP_WAIT
ESRBEAM/DPFREV,0.0,,RING_RAMP
ESRBEAM/DPFREV,0.00865,,RING_INTERMEDIATE
ESRBEAM/DPFREV,0.00865,,STORAGE_MANIP_WAIT
ESRBEAM/DPFREV,0.00865,,RING_INTERMEDIATE
ESRBEAM/DPFREV,0.00865,,RING_INTERMEDIATE
ESRBEAM/DPFREV,0.00865,,RING_INTERMEDIATE
ESRBEAM/DPFREV,0.00865,,STORAGE_MANIP_WAIT
ESRBEAM/DPFREV,0.00865,,RING_INTERMEDIATE
ESRBEAM/DPFREV,0.00865,,RING_RF_MANIPULATION
ESRBEAM/DPFREV,0.00865,,RING_INTERMEDIATE
ESRBEAM/DPFREV,0.00865,,RING_INTERMEDIATE
ESRBEAM/DPFREV,0.00865,,RING_INTERMEDIATE
ESRBEAM/ELEMENT_S,92,,RING_INJECTION
ESRBEAM/E_S,3.79E8,eV/u,RING_INJECTION
ESRBEAM/E_S,3.79E8,eV/u,RING_RAMP
ESRBEAM/H_S,2,,RING_INJECTION
ESRBEAM/INJ_BUNCHPATTERN_S,[true, true],,RING_INJECTION
ESRBEAM/INJ_EMIH_S,1.0E-5,m*rad,RING_INJECTION
ESRBEAM/INJ_EMIL_S,0.1,eVs/u,RING_INJECTION
ESRBEAM/INJ_EMIV_S,1.0E-5,m*rad,RING_INJECTION
ESRBEAM/ISOTOPE_S,238,,RING_INJECTION
ESRBEAM/KL_AMPL_S,0.0,,RING_INJECTION
ESRBEAM/KL_AMPL_S,0.0,,RING_BUNCHING
ESRBEAM/KL_AMPL_S,0.0,,RING_RF_MANIPULATION
ESRBEAM/KL_AMPL_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_AMPL_S,0.0,,RING_REBUNCHING
ESRBEAM/KL_AMPL_S,---,,RING_RAMP
ESRBEAM/KL_AMPL_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_AMPL_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_AMPL_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_AMPL_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_AMPL_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_AMPL_S,0.0,,RING_RF_MANIPULATION
ESRBEAM/KL_AMPL_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_AMPL_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_AMPL_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_HARM_S,1,,RING_INJECTION
ESRBEAM/KL_HARM_S,1,,RING_BUNCHING
ESRBEAM/KL_HARM_S,1,,RING_RF_MANIPULATION
ESRBEAM/KL_HARM_S,1,,RING_INTERMEDIATE
ESRBEAM/KL_HARM_S,1,,RING_REBUNCHING
ESRBEAM/KL_HARM_S,---,,RING_RAMP
ESRBEAM/KL_HARM_S,1,,RING_INTERMEDIATE
ESRBEAM/KL_HARM_S,1,,RING_INTERMEDIATE
ESRBEAM/KL_HARM_S,1,,RING_INTERMEDIATE
ESRBEAM/KL_HARM_S,1,,RING_INTERMEDIATE
ESRBEAM/KL_HARM_S,1,,RING_INTERMEDIATE
ESRBEAM/KL_HARM_S,1,,RING_RF_MANIPULATION
ESRBEAM/KL_HARM_S,1,,RING_INTERMEDIATE
ESRBEAM/KL_HARM_S,1,,RING_INTERMEDIATE
ESRBEAM/KL_HARM_S,1,,RING_INTERMEDIATE
ESRBEAM/KL_OFFSET_S,0.0,,RING_INJECTION
ESRBEAM/KL_OFFSET_S,0.0,,RING_BUNCHING
ESRBEAM/KL_OFFSET_S,0.0,,RING_RF_MANIPULATION
ESRBEAM/KL_OFFSET_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_OFFSET_S,0.0,,RING_REBUNCHING
ESRBEAM/KL_OFFSET_S,---,,RING_RAMP
ESRBEAM/KL_OFFSET_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_OFFSET_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_OFFSET_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_OFFSET_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_OFFSET_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_OFFSET_S,0.0,,RING_RF_MANIPULATION
ESRBEAM/KL_OFFSET_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_OFFSET_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_OFFSET_S,0.0,,RING_INTERMEDIATE
ESRBEAM/KL_PHASE_S,0.0,deg,RING_INJECTION
ESRBEAM/KL_PHASE_S,0.0,deg,RING_BUNCHING
ESRBEAM/KL_PHASE_S,0.0,deg,RING_RF_MANIPULATION
ESRBEAM/KL_PHASE_S,0.0,deg,RING_INTERMEDIATE
ESRBEAM/KL_PHASE_S,0.0,deg,RING_REBUNCHING
ESRBEAM/KL_PHASE_S,---,deg,RING_RAMP
ESRBEAM/KL_PHASE_S,0.0,deg,RING_INTERMEDIATE
ESRBEAM/KL_PHASE_S,0.0,deg,RING_INTERMEDIATE
ESRBEAM/KL_PHASE_S,0.0,deg,RING_INTERMEDIATE
ESRBEAM/KL_PHASE_S,0.0,deg,RING_INTERMEDIATE
ESRBEAM/KL_PHASE_S,0.0,deg,RING_INTERMEDIATE
ESRBEAM/KL_PHASE_S,0.0,deg,RING_RF_MANIPULATION
ESRBEAM/KL_PHASE_S,0.0,deg,RING_INTERMEDIATE
ESRBEAM/KL_PHASE_S,0.0,deg,RING_INTERMEDIATE
ESRBEAM/KL_PHASE_S,0.0,deg,RING_INTERMEDIATE
ESRBEAM/NPARTICLES_S,0.0,,RING_INJECTION
ESRBEAM/QH_END_S,2.4174,,RING_INJECTION
ESRBEAM/QH_END_S,2.4174,,STORAGE_MANIP_WAIT
ESRBEAM/QH_END_S,2.4174,,RING_RAMP
ESRBEAM/QH_END_S,2.4174,,STORAGE_MANIP_WAIT
ESRBEAM/QH_END_S,2.4174,,STORAGE_MANIP_WAIT
ESRBEAM/QV_END_S,2.3943,,RING_INJECTION
ESRBEAM/QV_END_S,2.3943,,STORAGE_MANIP_WAIT
ESRBEAM/QV_END_S,2.3943,,RING_RAMP
ESRBEAM/QV_END_S,2.3943,,STORAGE_MANIP_WAIT
ESRBEAM/QV_END_S,2.3943,,STORAGE_MANIP_WAIT
ESRBEAM/Q_S,92,,RING_INJECTION
ESRIKICKER/KICKER_MODE_S,1,,RING_INJECTION
ESRIKICKER/KICKER_START_S,76.0,deg,RING_INJECTION
ESRIKICKER/KICKER_THIGH1_S,5.087240783885225E-7,s,RING_INJECTION
ESRIKICKER/KICKER_TOFFSET1_S,2.8E-6,s,RING_INJECTION
ESRIKICKER/NBUNCH1_INPUT_S,1,,RING_INJECTION
ESRIKICKER/TGX_TIMING_TRIGGERED_B,false,,RING_INJECTION
ESROPTICS/OPTIC_NAME_S,ESR_STANDARD_OPTICS_TABLE,,RING_INJECTION
ESROPTICS/TAU_END_S,0.0,,RING_INJECTION
ESROPTICS/TAU_END_S,0.0,,RING_RAMP
ESRORBIT/XANG_ECB,0.0,rad,RING_INJECTION
ESRORBIT/XANG_ECB,0.0,rad,STORAGE_MANIP_WAIT
ESRORBIT/XANG_ECB,0.0,rad,STORAGE_MANIP_WAIT
ESRORBIT/XANG_ECB,0.0,rad,STORAGE_MANIP_WAIT
ESRORBIT/XANG_TAB,0.0013000000000000002,rad,RING_INJECTION
ESRORBIT/XANG_TAB,0.0013000000000000002,rad,STORAGE_MANIP_WAIT
ESRORBIT/XANG_TAB,0.0013000000000000002,rad,STORAGE_MANIP_WAIT
ESRORBIT/XANG_TAB,0.0013000000000000002,rad,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_ECB,-0.005,m,RING_INJECTION
ESRORBIT/XPOS_ECB,-0.005,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_ECB,-0.005,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_ECB,-0.005,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_SCK1,0.0,m,RING_INJECTION
ESRORBIT/XPOS_SCK1,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_SCK1,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_SCK1,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_SCK2,0.0,m,RING_INJECTION
ESRORBIT/XPOS_SCK2,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_SCK2,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_SCK2,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_SCP1,0.0,m,RING_INJECTION
ESRORBIT/XPOS_SCP1,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_SCP1,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_SCP1,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_SCP2,0.0,m,RING_INJECTION
ESRORBIT/XPOS_SCP2,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_SCP2,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_SCP2,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_TAB,0.0,m,RING_INJECTION
ESRORBIT/XPOS_TAB,0.0,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_TAB,-0.008,m,STORAGE_MANIP_WAIT
ESRORBIT/XPOS_TAB,-0.008,m,STORAGE_MANIP_WAIT
ESRRF/CAVITYPATTERN_S,[false, false, true],,RING_INJECTION
ESRRF/CAVITY_MODE_2D_S,[],,RING_INJECTION
ESRRF/CAVITY_MODE_2D_S,[],,RING_BUNCHING
ESRRF/CAVITY_MODE_2D_S,[],,RING_RF_MANIPULATION
ESRRF/CAVITY_MODE_2D_S,[],,RING_INTERMEDIATE
ESRRF/CAVITY_MODE_2D_S,[],,RING_REBUNCHING
ESRRF/CAVITY_MODE_2D_S,[],,STORAGE_MANIP_PERFORM
ESRRF/CAVITY_MODE_2D_S,[],,STORAGE_MANIP_WAIT
ESRRF/CAVITY_MODE_2D_S,[],,STORAGE_MANIP_RESTART_FGS
ESRRF/CAVITY_MODE_2D_S,[],,RING_RAMP
ESRRF/CAVITY_MODE_2D_S,[],,RING_INTERMEDIATE
ESRRF/CAVITY_MODE_2D_S,[],,STORAGE_MANIP_PERFORM
ESRRF/CAVITY_MODE_2D_S,[],,STORAGE_MANIP_WAIT
ESRRF/CAVITY_MODE_2D_S,[],,STORAGE_MANIP_RESTART_FGS
ESRRF/CAVITY_MODE_2D_S,[],,RING_INTERMEDIATE
ESRRF/CAVITY_MODE_2D_S,[],,RING_INTERMEDIATE
ESRRF/CAVITY_MODE_2D_S,[],,RING_INTERMEDIATE
ESRRF/CAVITY_MODE_2D_S,[],,STORAGE_MANIP_PERFORM
ESRRF/CAVITY_MODE_2D_S,[],,STORAGE_MANIP_WAIT
ESRRF/CAVITY_MODE_2D_S,[],,STORAGE_MANIP_RESTART_FGS
ESRRF/CAVITY_MODE_2D_S,[],,RING_INTERMEDIATE
ESRRF/CAVITY_MODE_2D_S,[],,RING_RF_MANIPULATION
ESRRF/CAVITY_MODE_2D_S,[],,RING_INTERMEDIATE
ESRRF/CAVITY_MODE_2D_S,[],,RING_INTERMEDIATE
ESRRF/CAVITY_MODE_2D_S,[],,RING_INTERMEDIATE
ESRRF/DUALH_ACTIVE_S,false,,RING_INJECTION
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_INJECTION
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_BUNCHING
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_RF_MANIPULATION
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_INTERMEDIATE
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_REBUNCHING
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_RAMP
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_INTERMEDIATE
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_INTERMEDIATE
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_INTERMEDIATE
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_INTERMEDIATE
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_INTERMEDIATE
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_RF_MANIPULATION
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_INTERMEDIATE
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_INTERMEDIATE
ESRRF/DUALH_RAW_S,[[0.0, 0.0]],,RING_INTERMEDIATE
ESRRF/PHASE_OFFSET_S,0.0,deg,RING_INJECTION
ESRRF/RF_MANIPULATION_RAW_S,[],,RING_RF_MANIPULATION
ESRRF/RF_MANIPULATION_RAW_S,---,,RING_REBUNCHING
ESRRF/RF_MANIPULATION_RAW_S,[[5, -1, -1, -1]],,RING_RAMP
ESRRF/RF_MANIPULATION_RAW_S,[],,RING_RF_MANIPULATION
ESRRF/SEQUENTIAL_RF_B,true,,RING_INJECTION
ESRSPEC/E_SPEC_S,0.0,eV/u,RING_INJECTION
ESRSPEC/GAMMA_SPEC_USER_S,1.0,,RING_INJECTION
ESRSPEC/SPEC_ACTIVE_B,false,,RING_INJECTION
ESRSYSTEM/GENERATE_MASP_MASKED_DEVICES_B,false,,RING_INJECTION
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_INJECTION
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_BUNCHING
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_RF_MANIPULATION
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_INTERMEDIATE
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_REBUNCHING
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_RAMP
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_INTERMEDIATE
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_INTERMEDIATE
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_INTERMEDIATE
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_INTERMEDIATE
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_INTERMEDIATE
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_RF_MANIPULATION
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_INTERMEDIATE
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_INTERMEDIATE
ESRSYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_INTERMEDIATE
ESRTIMEPARAM/BDOT_S,[0.3, 0.3],T/s,BEAMOUT_PRE
ESRTIMEPARAM/BDOT_S,[0.3, 0.3],T/s,RING_RAMP
ESRTIMEPARAM/BDOT_S,[0.3, 0.3],T/s,BEAMOUT_RAMP
ESRTIMEPARAM/BDOT_S,[0.3, 0.3],T/s,BEAMOUT_POST
ESRTIMEPARAM/BP_INDEX_B,---,,RING_INJECTION
ESRTIMEPARAM/BP_INDEX_S,---,,RING_INJECTION
ESRTIMEPARAM/COUPLING_TIMEOUT_S,---,s,RING_INJECTION
ESRTIMEPARAM/EVENT_B,---,,RING_INJECTION
ESRTIMEPARAM/EVENT_ID_S,---,,RING_INJECTION
ESRTIMEPARAM/MINPDIST_S,0.0,,BEAMOUT_PRE
ESRTIMEPARAM/MINPDIST_S,0.0,,STATIC
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_INJECTION
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_BUNCHING
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_RF_MANIPULATION
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_INTERMEDIATE
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_REBUNCHING
ESRTIMEPARAM/MINPDIST_S,0.0,,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/MINPDIST_S,0.0,,STORAGE_MANIP_WAIT
ESRTIMEPARAM/MINPDIST_S,0.0,,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_RAMP
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_INTERMEDIATE
ESRTIMEPARAM/MINPDIST_S,0.0,,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/MINPDIST_S,0.0,,STORAGE_MANIP_WAIT
ESRTIMEPARAM/MINPDIST_S,0.0,,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_INTERMEDIATE
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_INTERMEDIATE
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_INTERMEDIATE
ESRTIMEPARAM/MINPDIST_S,0.0,,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/MINPDIST_S,0.0,,STORAGE_MANIP_WAIT
ESRTIMEPARAM/MINPDIST_S,0.0,,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_INTERMEDIATE
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_RF_MANIPULATION
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_INTERMEDIATE
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_INTERMEDIATE
ESRTIMEPARAM/MINPDIST_S,0.0,,RING_INTERMEDIATE
ESRTIMEPARAM/MINPDIST_S,0.0,,BEAMOUT_RAMP
ESRTIMEPARAM/MINPDIST_S,0.0,,BEAMOUT_POST
ESRTIMEPARAM/OFFSET_S,---,s,RING_INJECTION
ESRTIMEPARAM/TGRID_S,0.002,s,BEAMOUT_PRE
ESRTIMEPARAM/TGRID_S,0.002,s,STATIC
ESRTIMEPARAM/TGRID_S,0.002,s,RING_INJECTION
ESRTIMEPARAM/TGRID_S,0.002,s,RING_BUNCHING
ESRTIMEPARAM/TGRID_S,0.002,s,RING_RF_MANIPULATION
ESRTIMEPARAM/TGRID_S,0.002,s,RING_INTERMEDIATE
ESRTIMEPARAM/TGRID_S,0.002,s,RING_REBUNCHING
ESRTIMEPARAM/TGRID_S,0.002,s,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/TGRID_S,0.002,s,STORAGE_MANIP_WAIT
ESRTIMEPARAM/TGRID_S,0.002,s,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/TGRID_S,0.002,s,RING_RAMP
ESRTIMEPARAM/TGRID_S,0.002,s,RING_INTERMEDIATE
ESRTIMEPARAM/TGRID_S,0.002,s,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/TGRID_S,0.002,s,STORAGE_MANIP_WAIT
ESRTIMEPARAM/TGRID_S,0.002,s,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/TGRID_S,0.002,s,RING_INTERMEDIATE
ESRTIMEPARAM/TGRID_S,0.002,s,RING_INTERMEDIATE
ESRTIMEPARAM/TGRID_S,0.002,s,RING_INTERMEDIATE
ESRTIMEPARAM/TGRID_S,0.002,s,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/TGRID_S,0.002,s,STORAGE_MANIP_WAIT
ESRTIMEPARAM/TGRID_S,0.002,s,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/TGRID_S,0.002,s,RING_INTERMEDIATE
ESRTIMEPARAM/TGRID_S,0.002,s,RING_RF_MANIPULATION
ESRTIMEPARAM/TGRID_S,0.002,s,RING_INTERMEDIATE
ESRTIMEPARAM/TGRID_S,0.002,s,RING_INTERMEDIATE
ESRTIMEPARAM/TGRID_S,0.002,s,RING_INTERMEDIATE
ESRTIMEPARAM/TGRID_S,0.002,s,BEAMOUT_RAMP
ESRTIMEPARAM/TGRID_S,0.002,s,BEAMOUT_POST
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,STATIC
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_INJECTION
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_BUNCHING
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_INTERMEDIATE
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_RAMP
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_INTERMEDIATE
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_INTERMEDIATE
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_INTERMEDIATE
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_INTERMEDIATE
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_INTERMEDIATE
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_INTERMEDIATE
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_INTERMEDIATE
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_INTERMEDIATE
ESRTIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RAMP
ESRTIMEPARAM/TMEASURE_S,0.0,s,RING_INJECTION
ESRTIMEPARAM/TMEASURE_S,0.0,s,RING_BUNCHING
ESRTIMEPARAM/TMEASURE_S,0.0,s,RING_RF_MANIPULATION
ESRTIMEPARAM/TMEASURE_S,10.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/TMEASURE_S,0.0,s,RING_REBUNCHING
ESRTIMEPARAM/TMEASURE_S,---,s,RING_RAMP
ESRTIMEPARAM/TMEASURE_S,10.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/TMEASURE_S,10.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/TMEASURE_S,10.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/TMEASURE_S,10.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/TMEASURE_S,10.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/TMEASURE_S,0.0,s,RING_RF_MANIPULATION
ESRTIMEPARAM/TMEASURE_S,10.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/TMEASURE_S,10.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/TMEASURE_S,10.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,BEAMOUT_PRE
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,STATIC
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_INJECTION
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_BUNCHING
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_RF_MANIPULATION
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_INTERMEDIATE
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_REBUNCHING
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,STORAGE_MANIP_WAIT
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_RAMP
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_INTERMEDIATE
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,STORAGE_MANIP_WAIT
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_INTERMEDIATE
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_INTERMEDIATE
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_INTERMEDIATE
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,STORAGE_MANIP_WAIT
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_INTERMEDIATE
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_RF_MANIPULATION
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_INTERMEDIATE
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_INTERMEDIATE
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_INTERMEDIATE
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,BEAMOUT_RAMP
ESRTIMEPARAM/TROUND_S,[0.032, 0.032],s,BEAMOUT_POST
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,BEAMOUT_PRE
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,STATIC
ESRTIMEPARAM/T_BP_LENGTH_S,10.0,s,RING_INJECTION
ESRTIMEPARAM/T_BP_LENGTH_S,10.0,s,RING_BUNCHING
ESRTIMEPARAM/T_BP_LENGTH_S,0.2,s,RING_RF_MANIPULATION
ESRTIMEPARAM/T_BP_LENGTH_S,10.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_BP_LENGTH_S,0.016,s,RING_REBUNCHING
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,STORAGE_MANIP_WAIT
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/T_BP_LENGTH_S,0.064,s,RING_RAMP
ESRTIMEPARAM/T_BP_LENGTH_S,0.1,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,STORAGE_MANIP_WAIT
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/T_BP_LENGTH_S,0.1,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_BP_LENGTH_S,0.1,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_BP_LENGTH_S,10.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,STORAGE_MANIP_WAIT
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/T_BP_LENGTH_S,0.1,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_BP_LENGTH_S,0.2,s,RING_RF_MANIPULATION
ESRTIMEPARAM/T_BP_LENGTH_S,0.1,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_BP_LENGTH_S,0.1,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_BP_LENGTH_S,10.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,BEAMOUT_RAMP
ESRTIMEPARAM/T_BP_LENGTH_S,0.196,s,BEAMOUT_POST
ESRTIMEPARAM/T_WAIT_S,0.032,s,BEAMOUT_PRE
ESRTIMEPARAM/T_WAIT_S,0.0,s,STATIC
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_INJECTION
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_BUNCHING
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_RF_MANIPULATION
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_REBUNCHING
ESRTIMEPARAM/T_WAIT_S,0.04,s,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/T_WAIT_S,0.0,s,STORAGE_MANIP_WAIT
ESRTIMEPARAM/T_WAIT_S,0.0,s,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/T_WAIT_S,0.128,s,RING_RAMP
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_WAIT_S,0.04,s,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/T_WAIT_S,0.0,s,STORAGE_MANIP_WAIT
ESRTIMEPARAM/T_WAIT_S,0.0,s,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_WAIT_S,0.04,s,STORAGE_MANIP_PERFORM
ESRTIMEPARAM/T_WAIT_S,0.0,s,STORAGE_MANIP_WAIT
ESRTIMEPARAM/T_WAIT_S,0.0,s,STORAGE_MANIP_RESTART_FGS
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_RF_MANIPULATION
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_WAIT_S,0.0,s,RING_INTERMEDIATE
ESRTIMEPARAM/T_WAIT_S,0.032,s,BEAMOUT_RAMP
ESRTIMEPARAM/T_WAIT_S,0.032,s,BEAMOUT_POST
LOGICAL.GECEMO1P/I,206.9,A,ECOOLER_COOLING
LOGICAL.GECEMO1P/I,206.9,A,ECOOLER_COOLING
LOGICAL.GECEMO1P/I,206.9,A,ECOOLER_COOLING
LOGICAL.GECEMO1P/I,206.9,A,ECOOLER_COOLING
LOGICAL.GECEMO1P/I,206.9,A,ECOOLER_COOLING
LOGICAL.GECEMO1P/I,206.9,A,ECOOLER_COOLING
LOGICAL.GECEKX1/I,430.0,A,ECOOLER_COOLING
LOGICAL.GECEKX1/I,430.0,A,ECOOLER_COOLING
LOGICAL.GECEKX1/I,430.0,A,ECOOLER_COOLING
LOGICAL.GECEKX1/I,430.0,A,ECOOLER_COOLING
LOGICAL.GECEKX1/I,430.0,A,ECOOLER_COOLING
LOGICAL.GECEKX1/I,430.0,A,ECOOLER_COOLING
LOGICAL.GECEKY1/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKY1/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKY1/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKY1/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKY1/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKY1/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEMO3C/I,277.5,A,ECOOLER_COOLING
LOGICAL.GECEMO3C/I,277.5,A,ECOOLER_COOLING
LOGICAL.GECEMO3C/I,277.5,A,ECOOLER_COOLING
LOGICAL.GECEMO3C/I,277.5,A,ECOOLER_COOLING
LOGICAL.GECEMO3C/I,277.5,A,ECOOLER_COOLING
LOGICAL.GECEMO3C/I,277.5,A,ECOOLER_COOLING
LOGICAL.GECEKT1G/I,138.7,A,ECOOLER_COOLING
LOGICAL.GECEKT1G/I,138.7,A,ECOOLER_COOLING
LOGICAL.GECEKT1G/I,138.7,A,ECOOLER_COOLING
LOGICAL.GECEKT1G/I,138.7,A,ECOOLER_COOLING
LOGICAL.GECEKT1G/I,138.7,A,ECOOLER_COOLING
LOGICAL.GECEKT1G/I,138.7,A,ECOOLER_COOLING
LOGICAL.GECEMO4K/SOLENOID_I,534.54,A,ECOOLER_COOLING
LOGICAL.GECEMO4K/SOLENOID_I,534.54,A,ECOOLER_COOLING
LOGICAL.GECEMO4K/SOLENOID_I,534.54,A,ECOOLER_COOLING
LOGICAL.GECEMO4K/SOLENOID_I,534.54,A,ECOOLER_COOLING
LOGICAL.GECEMO4K/SOLENOID_I,534.54,A,ECOOLER_COOLING
LOGICAL.GECEMO4K/SOLENOID_I,534.54,A,ECOOLER_COOLING
LOGICAL.GECEKT3C/I,95.0,A,ECOOLER_COOLING
LOGICAL.GECEKT3C/I,95.0,A,ECOOLER_COOLING
LOGICAL.GECEKT3C/I,95.0,A,ECOOLER_COOLING
LOGICAL.GECEKT3C/I,95.0,A,ECOOLER_COOLING
LOGICAL.GECEKT3C/I,95.0,A,ECOOLER_COOLING
LOGICAL.GECEKT3C/I,95.0,A,ECOOLER_COOLING
LOGICAL.GECEKT4C/I,95.0,A,ECOOLER_COOLING
LOGICAL.GECEKT4C/I,95.0,A,ECOOLER_COOLING
LOGICAL.GECEKT4C/I,95.0,A,ECOOLER_COOLING
LOGICAL.GECEKT4C/I,95.0,A,ECOOLER_COOLING
LOGICAL.GECEKT4C/I,95.0,A,ECOOLER_COOLING
LOGICAL.GECEKT4C/I,95.0,A,ECOOLER_COOLING
LOGICAL.GECEKT5K/I,150.0,A,ECOOLER_COOLING
LOGICAL.GECEKT5K/I,150.0,A,ECOOLER_COOLING
LOGICAL.GECEKT5K/I,150.0,A,ECOOLER_COOLING
LOGICAL.GECEKT5K/I,150.0,A,ECOOLER_COOLING
LOGICAL.GECEKT5K/I,150.0,A,ECOOLER_COOLING
LOGICAL.GECEKT5K/I,150.0,A,ECOOLER_COOLING
LOGICAL.GECEKY6G/TOROID_I,127.8374,A,ECOOLER_COOLING
LOGICAL.GECEKY6G/TOROID_I,127.8374,A,ECOOLER_COOLING
LOGICAL.GECEKY6G/TOROID_I,127.8374,A,ECOOLER_COOLING
LOGICAL.GECEKY6G/TOROID_I,127.8374,A,ECOOLER_COOLING
LOGICAL.GECEKY6G/TOROID_I,127.8374,A,ECOOLER_COOLING
LOGICAL.GECEKY6G/TOROID_I,127.8374,A,ECOOLER_COOLING
LOGICAL.GECEKY7K/TOROID_I,127.8374,A,ECOOLER_COOLING
LOGICAL.GECEKY7K/TOROID_I,127.8374,A,ECOOLER_COOLING
LOGICAL.GECEKY7K/TOROID_I,127.8374,A,ECOOLER_COOLING
LOGICAL.GECEKY7K/TOROID_I,127.8374,A,ECOOLER_COOLING
LOGICAL.GECEKY7K/TOROID_I,127.8374,A,ECOOLER_COOLING
LOGICAL.GECEKY7K/TOROID_I,127.8374,A,ECOOLER_COOLING
LOGICAL.GECEKY8G/TOROID_I,83.586,A,ECOOLER_COOLING
LOGICAL.GECEKY8G/TOROID_I,83.586,A,ECOOLER_COOLING
LOGICAL.GECEKY8G/TOROID_I,83.586,A,ECOOLER_COOLING
LOGICAL.GECEKY8G/TOROID_I,83.586,A,ECOOLER_COOLING
LOGICAL.GECEKY8G/TOROID_I,83.586,A,ECOOLER_COOLING
LOGICAL.GECEKY8G/TOROID_I,83.586,A,ECOOLER_COOLING
LOGICAL.GECEKY9K/TOROID_I,83.586,A,ECOOLER_COOLING
LOGICAL.GECEKY9K/TOROID_I,83.586,A,ECOOLER_COOLING
LOGICAL.GECEKY9K/TOROID_I,83.586,A,ECOOLER_COOLING
LOGICAL.GECEKY9K/TOROID_I,83.586,A,ECOOLER_COOLING
LOGICAL.GECEKY9K/TOROID_I,83.586,A,ECOOLER_COOLING
LOGICAL.GECEKY9K/TOROID_I,83.586,A,ECOOLER_COOLING
LOGICAL.GECEKX3G/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX3G/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX3G/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX3G/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX3G/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX3G/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKY3G/I,-50.0,A,ECOOLER_COOLING
LOGICAL.GECEKY3G/I,-50.0,A,ECOOLER_COOLING
LOGICAL.GECEKY3G/I,-50.0,A,ECOOLER_COOLING
LOGICAL.GECEKY3G/I,-50.0,A,ECOOLER_COOLING
LOGICAL.GECEKY3G/I,-50.0,A,ECOOLER_COOLING
LOGICAL.GECEKY3G/I,-50.0,A,ECOOLER_COOLING
LOGICAL.GECEKX4K/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX4K/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX4K/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX4K/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX4K/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX4K/I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKY4K/I,-50.0,A,ECOOLER_COOLING
LOGICAL.GECEKY4K/I,-50.0,A,ECOOLER_COOLING
LOGICAL.GECEKY4K/I,-50.0,A,ECOOLER_COOLING
LOGICAL.GECEKY4K/I,-50.0,A,ECOOLER_COOLING
LOGICAL.GECEKY4K/I,-50.0,A,ECOOLER_COOLING
LOGICAL.GECEKY4K/I,-50.0,A,ECOOLER_COOLING
LOGICAL.GECEKX5C/ECORR_ANG_I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX5C/ECORR_ANG_I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX5C/ECORR_ANG_I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX5C/ECORR_ANG_I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX5C/ECORR_ANG_I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX5C/ECORR_ANG_I,0.0,A,ECOOLER_COOLING
LOGICAL.GECEKX5C/STEERER_ANG_S,0.0,rad,ECOOLER_COOLING
LOGICAL.GECEKX5C/STEERER_ANG_S,0.0,rad,ECOOLER_COOLING
LOGICAL.GECEKX5C/STEERER_ANG_S,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GECEKX5C/STEERER_ANG_S,0.0,rad,ECOOLER_COOLING
LOGICAL.GECEKX5C/STEERER_ANG_S,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GECEKX5C/STEERER_ANG_S,0.0,rad,ECOOLER_COOLING
LOGICAL.GECEKX5C/STEERER_ANG_S,0.0,rad,STORAGE_MANIP_WAIT
LOGICAL.GECEKX5C/STEERER_ANG_S,0.0,rad,ECOOLER_COOLING
LOGICAL.GECEKX5C/STEERER_ANG_S,0.0,rad,ECOOLER_COOLING
LOGICAL.GECEKY5C/ECORR_ANG_I,-0.1818,A,ECOOLER_COOLING
LOGICAL.GECEKY5C/ECORR_ANG_I,-0.1818,A,ECOOLER_COOLING
LOGICAL.GECEKY5C/ECORR_ANG_I,-0.1818,A,ECOOLER_COOLING
LOGICAL.GECEKY5C/ECORR_ANG_I,-0.1818,A,ECOOLER_COOLING
LOGICAL.GECEKY5C/ECORR_ANG_I,-0.1818,A,ECOOLER_COOLING
LOGICAL.GECEKY5C/ECORR_ANG_I,-0.1818,A,ECOOLER_COOLING
LOGICAL.GECEKY5C/STEERER_ANG_S,-2.5E-4,rad,ECOOLER_COOLING
LOGICAL.GECEKY5C/STEERER_ANG_S,-2.5E-4,rad,ECOOLER_COOLING
LOGICAL.GECEKY5C/STEERER_ANG_S,-2.5E-4,rad,STORAGE_MANIP_WAIT
LOGICAL.GECEKY5C/STEERER_ANG_S,-2.5E-4,rad,ECOOLER_COOLING
LOGICAL.GECEKY5C/STEERER_ANG_S,-2.5E-4,rad,STORAGE_MANIP_WAIT
LOGICAL.GECEKY5C/STEERER_ANG_S,-2.5E-4,rad,ECOOLER_COOLING
LOGICAL.GECEKY5C/STEERER_ANG_S,-2.5E-4,rad,STORAGE_MANIP_WAIT
LOGICAL.GECEKY5C/STEERER_ANG_S,-2.5E-4,rad,ECOOLER_COOLING
LOGICAL.GECEKY5C/STEERER_ANG_S,-2.5E-4,rad,ECOOLER_COOLING
LOGICAL.GECEKD1D/I,0.98,A,ECOOLER_COOLING
LOGICAL.GECEKD1D/I,0.98,A,ECOOLER_COOLING
LOGICAL.GECEKD1D/I,0.98,A,ECOOLER_COOLING
LOGICAL.GECEKD1D/I,0.98,A,ECOOLER_COOLING
LOGICAL.GECEKD1D/I,0.98,A,ECOOLER_COOLING
LOGICAL.GECEKD1D/I,0.98,A,ECOOLER_COOLING
LOGICAL.GECEKD2D/I,1.85,A,ECOOLER_COOLING
LOGICAL.GECEKD2D/I,1.85,A,ECOOLER_COOLING
LOGICAL.GECEKD2D/I,1.85,A,ECOOLER_COOLING
LOGICAL.GECEKD2D/I,1.85,A,ECOOLER_COOLING
LOGICAL.GECEKD2D/I,1.85,A,ECOOLER_COOLING
LOGICAL.GECEKD2D/I,1.85,A,ECOOLER_COOLING
LOGICAL.GECEMT3G/I,301.9,A,ECOOLER_COOLING
LOGICAL.GECEMT3G/I,301.9,A,ECOOLER_COOLING
LOGICAL.GECEMT3G/I,301.9,A,ECOOLER_COOLING
LOGICAL.GECEMT3G/I,301.9,A,ECOOLER_COOLING
LOGICAL.GECEMT3G/I,301.9,A,ECOOLER_COOLING
LOGICAL.GECEMT3G/I,301.9,A,ECOOLER_COOLING
LOGICAL.GECEBG1E/DELUACC_S,3937.0,V,ECOOLER_COOLING
LOGICAL.GECEBG1E/DELUACC_S,3937.0,V,ECOOLER_COOLING
LOGICAL.GECEBG1E/DELUACC_S,3937.0,V,STORAGE_MANIP_WAIT
LOGICAL.GECEBG1E/DELUACC_S,3957.0,V,ECOOLER_COOLING
LOGICAL.GECEBG1E/DELUACC_S,3957.0,V,STORAGE_MANIP_WAIT
LOGICAL.GECEBG1E/DELUACC_S,3957.0,V,ECOOLER_COOLING
LOGICAL.GECEBG1E/DELUACC_S,3957.0,V,STORAGE_MANIP_WAIT
LOGICAL.GECEBG1E/DELUACC_S,3957.0,V,ECOOLER_COOLING
LOGICAL.GECEBG1E/DELUACC_S,3957.0,V,ECOOLER_COOLING
LOGICAL.GECEBG1E/UACC_START_END_S,[209678.0449, 209678.0449],V,ECOOLER_COOLING
LOGICAL.GECEBG1E/UACC_START_END_S,[209678.0449, 209678.0449],V,ECOOLER_COOLING
LOGICAL.GECEBG1E/UACC_START_END_S,[209650.0595, 209650.0595],V,ECOOLER_COOLING
LOGICAL.GECEBG1E/UACC_START_END_S,[209650.0595, 209650.0595],V,ECOOLER_COOLING
LOGICAL.GECEBG1E/UACC_START_END_S,[209650.0595, 209650.0595],V,ECOOLER_COOLING
LOGICAL.GECEBG1E/UACC_START_END_S,[209650.0595, 209650.0595],V,ECOOLER_COOLING
LOGICAL.GECEBG1E/U_COOLER,209678.0449,V,STORAGE_MANIP_WAIT
LOGICAL.GECEBG1E/U_COOLER,209650.0595,V,STORAGE_MANIP_WAIT
LOGICAL.GECEBG1E/U_COOLER,209650.0595,V,STORAGE_MANIP_WAIT
LOGICAL.GECEBG2T/U_COOLER,3538.9215,V,ECOOLER_COOLING
LOGICAL.GECEBG2T/U_COOLER,3538.9215,V,ECOOLER_COOLING
LOGICAL.GECEBG2T/U_COOLER,1404.4219,V,ECOOLER_COOLING
LOGICAL.GECEBG2T/U_COOLER,1404.4219,V,ECOOLER_COOLING
LOGICAL.GECEBG2T/U_COOLER,1404.4219,V,ECOOLER_COOLING
LOGICAL.GECEBG2T/U_COOLER,1404.4219,V,ECOOLER_COOLING
LOGICAL.GECEBG5T/U_GUN_S,2000.0,V,ECOOLER_COOLING
LOGICAL.GECEBG5T/U_GUN_S,2000.0,V,ECOOLER_COOLING
LOGICAL.GECEBG5T/U_GUN_S,2000.0,V,ECOOLER_COOLING
LOGICAL.GECEBG5T/U_GUN_S,2000.0,V,ECOOLER_COOLING
LOGICAL.GECEBG5T/U_GUN_S,2000.0,V,ECOOLER_COOLING
LOGICAL.GECEBG5T/U_GUN_S,2000.0,V,ECOOLER_COOLING
LOGICAL.GECEBG6T/U_COOLER,3538.9215,V,ECOOLER_COOLING
LOGICAL.GECEBG6T/U_COOLER,3538.9215,V,ECOOLER_COOLING
LOGICAL.GECEBG6T/U_COOLER,1404.4219,V,ECOOLER_COOLING
LOGICAL.GECEBG6T/U_COOLER,1404.4219,V,ECOOLER_COOLING
LOGICAL.GECEBG6T/U_COOLER,1404.4219,V,ECOOLER_COOLING
LOGICAL.GECEBG6T/U_COOLER,1404.4219,V,ECOOLER_COOLING
LOGICAL.GECEBG7T/U_COOLER,280.0,V,ECOOLER_COOLING
LOGICAL.GECEBG7T/U_COOLER,280.0,V,ECOOLER_COOLING
LOGICAL.GECEBG7T/U_COOLER,220.0,V,ECOOLER_COOLING
LOGICAL.GECEBG7T/U_COOLER,220.0,V,ECOOLER_COOLING
LOGICAL.GECEBG7T/U_COOLER,220.0,V,ECOOLER_COOLING
LOGICAL.GECEBG7T/U_COOLER,220.0,V,ECOOLER_COOLING
LOGICAL.GECEBG8T/U_S,5000.0,V,ECOOLER_COOLING
LOGICAL.GECEBG8T/U_S,5000.0,V,ECOOLER_COOLING
LOGICAL.GECEBG8T/U_S,5000.0,V,ECOOLER_COOLING
LOGICAL.GECEBG8T/U_S,5000.0,V,ECOOLER_COOLING
LOGICAL.GECEBG8T/U_S,5000.0,V,ECOOLER_COOLING
LOGICAL.GECEBG8T/U_S,5000.0,V,ECOOLER_COOLING
LOGICAL.GECEBG1D/U_COOLER,308.0,V,ECOOLER_COOLING
LOGICAL.GECEBG1D/U_COOLER,308.0,V,ECOOLER_COOLING
LOGICAL.GECEBG1D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG1D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG1D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG1D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG2D/U_COOLER,308.0,V,ECOOLER_COOLING
LOGICAL.GECEBG2D/U_COOLER,308.0,V,ECOOLER_COOLING
LOGICAL.GECEBG2D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG2D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG2D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG2D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG3D/U_COOLER,308.0,V,ECOOLER_COOLING
LOGICAL.GECEBG3D/U_COOLER,308.0,V,ECOOLER_COOLING
LOGICAL.GECEBG3D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG3D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG3D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG3D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG4D/U_COOLER,308.0,V,ECOOLER_COOLING
LOGICAL.GECEBG4D/U_COOLER,308.0,V,ECOOLER_COOLING
LOGICAL.GECEBG4D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG4D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG4D/U_COOLER,242.0,V,ECOOLER_COOLING
LOGICAL.GECEBG4D/U_COOLER,242.0,V,ECOOLER_COOLING
ESR_COOLER_EBEAM/BT,0.1,T,ECOOLER_COOLING
ESR_COOLER_EBEAM/BT,0.1,T,ECOOLER_COOLING
ESR_COOLER_EBEAM/BT,0.1,T,ECOOLER_COOLING
ESR_COOLER_EBEAM/BT,0.1,T,ECOOLER_COOLING
ESR_COOLER_EBEAM/BT,0.1,T,ECOOLER_COOLING
ESR_COOLER_EBEAM/BT,0.1,T,ECOOLER_COOLING
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STATIC
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,ECOOLER_COOLING
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STATIC
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STATIC
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STATIC
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,ECOOLER_COOLING
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STORAGE_MANIP_PERFORM
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STORAGE_MANIP_WAIT
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STORAGE_MANIP_RESTART_FGS
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,BEAMOUT_RAMP
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,ECOOLER_COOLING
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STORAGE_MANIP_PERFORM
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STORAGE_MANIP_WAIT
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STORAGE_MANIP_RESTART_FGS
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,ECOOLER_COOLING
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STATIC
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STATIC
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STORAGE_MANIP_PERFORM
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STORAGE_MANIP_WAIT
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STORAGE_MANIP_RESTART_FGS
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,ECOOLER_COOLING
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STATIC
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STATIC
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,ECOOLER_COOLING
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,STATIC
ESR_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,BEAMOUT_RAMP
ESR_COOLER_EBEAM/GAMME_USER,1.4025,,ECOOLER_COOLING
ESR_COOLER_EBEAM/GAMME_USER,1.4025,,ECOOLER_COOLING
ESR_COOLER_EBEAM/GAMME_USER,1.4025,,ECOOLER_COOLING
ESR_COOLER_EBEAM/GAMME_USER,1.4025,,ECOOLER_COOLING
ESR_COOLER_EBEAM/GAMME_USER,1.4025,,ECOOLER_COOLING
ESR_COOLER_EBEAM/GAMME_USER,1.4025,,ECOOLER_COOLING
ESR_COOLER_EBEAM/IE_S,0.4,A,ECOOLER_COOLING
ESR_COOLER_EBEAM/IE_S,0.4,A,ECOOLER_COOLING
ESR_COOLER_EBEAM/IE_S,0.4,A,STORAGE_MANIP_WAIT
ESR_COOLER_EBEAM/IE_S,0.1,A,ECOOLER_COOLING
ESR_COOLER_EBEAM/IE_S,0.1,A,STORAGE_MANIP_WAIT
ESR_COOLER_EBEAM/IE_S,0.1,A,ECOOLER_COOLING
ESR_COOLER_EBEAM/IE_S,0.1,A,STORAGE_MANIP_WAIT
ESR_COOLER_EBEAM/IE_S,0.1,A,ECOOLER_COOLING
ESR_COOLER_EBEAM/IE_S,0.1,A,ECOOLER_COOLING
ESR_COOLER_EBEAM/OVERWRITE_GAMME_B,true,,ECOOLER_COOLING
ESR_COOLER_EBEAM/OVERWRITE_GAMME_B,true,,ECOOLER_COOLING
ESR_COOLER_EBEAM/OVERWRITE_GAMME_B,true,,ECOOLER_COOLING
ESR_COOLER_EBEAM/OVERWRITE_GAMME_B,true,,ECOOLER_COOLING
ESR_COOLER_EBEAM/OVERWRITE_GAMME_B,true,,ECOOLER_COOLING
ESR_COOLER_EBEAM/OVERWRITE_GAMME_B,true,,ECOOLER_COOLING
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,STATIC
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,ECOOLER_COOLING
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,STATIC
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,STATIC
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,STATIC
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,ECOOLER_COOLING
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RAMP
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,ECOOLER_COOLING
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,ECOOLER_COOLING
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,STATIC
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,STATIC
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,ECOOLER_COOLING
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,STATIC
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,STATIC
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,ECOOLER_COOLING
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,STATIC
ESR_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RAMP
LOGICAL.ESR_COOLER_EAUX/BETAE_S,0.7012,,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/BETAE_S,0.7012,,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/BETAE_S,0.7012,,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/BETAE_S,0.7012,,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/BETAE_S,0.7012,,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/BETAE_S,0.7012,,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/NERF_S,4.1896966112323794E12,1/m³,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/NERF_S,4.1896966112323794E12,1/m³,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/NERF_S,1.0474241528080948E12,1/m³,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/NERF_S,1.0474241528080948E12,1/m³,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/NERF_S,1.0474241528080948E12,1/m³,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/NERF_S,1.0474241528080948E12,1/m³,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/UACC_S,205677.0644,V,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/UACC_S,205677.0644,V,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/UACC_S,205677.0644,V,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/UACC_S,205677.0644,V,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/UACC_S,205677.0644,V,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/UACC_S,205677.0644,V,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/USC_START_END_S,[63.9805, 63.9805],V,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/USC_START_END_S,[63.9805, 63.9805],V,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/USC_START_END_S,[15.9951, 15.9951],V,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/USC_START_END_S,[15.9951, 15.9951],V,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/USC_START_END_S,[15.9951, 15.9951],V,ECOOLER_COOLING
LOGICAL.ESR_COOLER_EAUX/USC_START_END_S,[15.9951, 15.9951],V,ECOOLER_COOLING
  111   Wed Apr 6 15:19:29 2022 Svea, ShahabAccelerator5s delay implemented before injection
Operators have informed us that for better stability and operation (and cooperation with HHT), and after discussing with Sergey, they have introduced 5s delay "Wartezeit RESET" before every injection.

We have to observe this new behavior and in case it needs further optimizations, we have to inform the operators.
  110   Wed Apr 6 14:52:29 2022 RodolfoRunsScraping the ion beam
We are T-scraping the ion beam.
  108   Wed Apr 6 13:32:57 2022 Max, SebastianDAQLabView Cobra Channel List
channel 0: linux time (epoch time)
channel 1: ms timer
channel 2: E-Cooler Voltage(Ohmlabs)
channel 3: Cobra Set Wavelength
channel 4: WS7 wavelength
channel 5: WS7 frequency
channel 6: WS7 status
channel 7: Status keysight (?)
channel 8: WS7 pressure (?)
channel 9: CobraMotorPosUpperPart
channel 10: CobraMotorPosLowerPart
channel 11: CobraNumberOfLoop
channel 12: StatusCobra
channel 13: WS7 temperature (?)
channel 14: CobraFromWavelength (higher wavelength)
channel 15: CobraToWavelength (lower wavelength) 
channel 16: CobraIncrement
channel 17: CobraStepNr
channel 18: status?
channel 19: PTB divider (not connected to cooler)
channel 20: ?



 
  107   Wed Apr 6 09:30:53 2022 DanyalAcceleratorESR is blue again - errors are fixed
The ESR is "blue" again. 

The errors (scu related) have been fixed. 

In principle, normal operation should be possible. 

After the morning meeting Regina will return to the main control room. 

I guess that we continue at 10 AM. 
  106   Wed Apr 6 08:31:54 2022 Danyal & ReginaGeneralESR had some errors
Regina noticed that the ESR was "red" 

This means that there are some errors. 

She found: 
 
correction fields in the dipoles were off

GE01KP02 ... 05
GE01KP22 ... 24 

and some correction elements were off 

GE02KX6 
GE01KX2 


Regina would like to know since WHEN this is the case. 

In general, such errors affect the ion beam trajectory ! 

Regina will try to find out more details on how this may have shifted the orbit.
  105   Wed Apr 6 08:06:02 2022 DanyalDAQstopped NTCAP data acquisition
I stopped the NTCAP data acquisition at 8 AM.

Let's hope that the file contains good data.
  104   Tue Apr 5 23:55:11 2022 CarstenRunsLong time measurment with NTCAP
Settings:
Center: 2242.5MHz
RefLevel: -25dB
Rate 15 MIQs

File Numbers: 2022_04_05 23-46-22

Please note that the file started one minute earlier had wrong settings.

File contains also injection, paused in machine #5: ramped to central orbit / not yet bunched.
The measurement does not represent the later settings since here hte 229Th89+ is still on a too inner orbit (cf. previous post).

The beam settings can also be found in the previous post.
  103   Tue Apr 5 23:07:34 2022 CarstenAccelerator229Th89+ identification after re-tuning of the ESR
The ESR was retuned this aftenoon since the it was unclear if we still sit the 229Th89+ line.
This lead to new ring settings (data with all the settings will be put in tomorrow).

Thhe ESR had to leave at around 1900 so we did not find the time for finetuning and adjustments of the bunching.

Yet, we performed the particle identification with:
- (1) Energy of the SIS in the maximum of 238U92+ (534MeV/u) but ring settings Brho etc. and Cooler voltage already for 229Th89+ (+1937 kV compared to optimal settings for 238U92+) (Ucool according to "green" voltage measurement in Messhütte) 
- (2) Energy of SIS +3.5 MeV/u (maximiun of 229/89+ production), ESR with identical settings as for te ID run.



In setting (1) the priary beam is still in the ring aceptance and can be used as a unique identifier, but it is cooled very slowly.

In the measurement we typicall have 500mA at injection (fast cooling) and 100 mA for the measurement (lon glifetime of beam), but for the particle ID we also used 500MA in order toaccelerate cooling.
The ion beam slowlly grows as the ions are cooled in and gets the strongest line but also fades out much faster than the other peakks during a much higher recombination (=capture of cooler electron) than the 229Th89+. (Empty K-shell comared to 1e- in K-shell => factor of 2 recombination in cooler).

Frequencies (stopped in machine 5):

242.047 MHz (238U92+, @ 500mA) in machine #5
242.277 MHz (229/89+, @ 500mA) in machine #5
minus 4.65kHz for 100mA ecurrent

Voltage settings for cooler:
Sc3 (500mA, 209794V)
SC5,7 (100mA, 209750.06V)
  102   Tue Apr 5 20:58:53 2022 WilfriedLaserTrigger for Laser
Electronic for the timing of the laser puls optimized. The problem with the broad photodiode histograms is solved.
The photo of the oscilloscope picture shows in magenta the pulses from the (discriminated RF)/2, in yellow the pulses that are generated to open the Q-Switch. The latter are generated by the coincidence of the 30-Hz trigger (2 microsec long) to
allow for the Q-Switch to be fired. Within this period are usually 2 pulses from the RF and both generate a 100 ns long coincidence puls. The first one of those creates a 50 microsec long window (light blue) that is send to the Q-switch. The length
and the delay of this pulse can be changed. While the length is kept fixed, the delay can be changed in order to shift the arrival time of the laser pulse at the electron cooler to coincide with the ion bunch.
The problem of the wide photodiode histograms and the background was caused by a too large pulsewidth of the discriminated RF. The magenta pulses were about 100 ns long. Any pulse that arrives within a timespan between 99 and 0 ns before the 30-Hz
trigger of the Q-switch "allowance" will trigger a laser pulse immediately at the start of this trigger and therefore a jitter of up to 100 ns can occur. Therefore it is important that the CFD pulses are as short as possible, we set them to 20 ns
and the width of the photodiode histogram was just 3 bins wide (at the foot maybe 5 bins).

I (Rodolfo) just added the picture with the cabling configuration. The colors of cables match together with the colors show in the oscilloscope.
Attachment 1: TriggerForLaser_05-04-2022.PNG
TriggerForLaser_05-04-2022.PNG
Attachment 2: TriggerLaser_Cabling.jpg
TriggerLaser_Cabling.jpg
  101   Tue Apr 5 20:16:13 2022 RodolfoLaserDiscriminator for HF reference signal
For the laser trigger we need to generate a few ns NIM-puls from the HF reference signal. Therefore we (Wilfried, Konstantin and me) have changed the constant fraction descriminator (CFD) to generate this kind of pulse.

- We are using now the module N843 from CAEN, see picture below. With this we could now produce ~20 ns long pulse.
- This signal is also used as STOP trigger for the VUPROMs
Attachment 1: CFD_für_HFSignal.jpg
CFD_für_HFSignal.jpg
Attachment 2: Disc_HFSignal_05-04-2022.PNG
Disc_HFSignal_05-04-2022.PNG
  100   Tue Apr 5 15:25:47 2022 Sebastian, Kristian, Pierre-MichelDAQGo4 Conditions for "TDC_stacked_Sig/Ref" histogram
First version of TDC_stacked histograms implemented.

Under folder "Conditions" you can now integrate over user defined Limits (Xmin and Xmax).
  99   Tue Apr 5 14:51:51 2022 KristianDAQdark counts
We shielded the PMTs, i.e., the N2 tube, which improved the Cu PMT background rate.

Without beam and ESR lights off:

PMT Mitte: 4 Hz
PMT Nord: 1 Hz
PMT Cu: 240 Hz
  98   Tue Apr 5 13:28:06 2022 KristianDAQSpikes in PMT signal
Occasionally, we noticed a spike in the PMT signal. No ions in the ring and at PMT Cu was not even supplied with HV. Has to be some electronic pickup
Attachment 1: spike.png
spike.png
  97   Tue Apr 5 13:24:40 2022 KristianDetectorsPMT Cu
HV cable was in wrong channel in power supply. Now it is back to the correct position. Checked connection at the PMT.
  96   Tue Apr 5 12:17:12 2022 Ragan, Rui-JiuDAQInstructions to start and stop NTCAP
Attached are the instructions to start and stop data taking using the NTCAP.
Attachment 1: Start_data_taking.pdf
Start_data_taking.pdf
Attachment 2: Stop_data_taking.pdf
Stop_data_taking.pdf
Attachment 3: Start_data_taking.png
Start_data_taking.png
Attachment 4: Stop_data_taking.png
Stop_data_taking.png
  95   Tue Apr 5 11:14:52 2022 Sebastian, Kristian, Pierre-MichelDAQPMT over wavelength histogram v2
Today we finalized the PMT over wavelength histogram in:

Analysis/Histograms/Step2_Anl/LabView/laserscan

Currently the histogram shows the PMT middle signal on the y axis.

Remark: Tomorrow we create this kind of histogram for all PMTs.
  94   Tue Apr 5 09:45:47 2022 Danyal & YuriAcceleratorbeam is back in the ESR - a slit was moved in
And now also in English :) 

The ion beam is back in the ESR! 
Apparently, there was a slit moved in. (Maybe even 2)

This could have been GEEXDR11S and/or the GEEXDR1AS 

We now have the following parameters: 

SIS injection energy = 537.5 MeV/u  (we did not change this) 
Chopper window 70 us (we did not change this) 

We now have about 1.2e9 ions per injection in the ESR
  93   Tue Apr 5 09:39:01 2022 Danyal & YuriAcceleratorStrahl ist wieder im ESR - Schlitz war reingefahren
Der Strahl ist wieder im ESR! 
Angeblich war einen Schlitz, oder sogar 2, reingefahren worden. 
Es könnte entweder der GEEXDR11S und/oder den GEEXDR1AS  gewesen sein. 

Wir haben jetzt folgende Parameter: 

SIS Injektionsenergie = 537.5 MeV/u  (haben wir nicht geändert) 
Chopper window 70 us (nicht geändert) 

Wir haben jetzt etwa 1.2e9 Ionen pro Injektion im ESR
  92   Tue Apr 5 08:00:50 2022 Kristian & SebastianDAQMBS Channellist (so far)
MBS Channellist (time 5.4.2022)

0 Anode
1 Front
2 Back
3 PMT Süd
4 PMT Mitte
5 PMT Nord
6 PMT Cu
7 Par Det Süd
8 Par Det Nord
9 1kHz from clock generator ???
10 empty
11 empty
12 delayed common stop ???
13 PD NO
14 PD SO
15 Q-Switch

16 DC Trafo
17 Injection
18 U-Ecool
19 I-Ecool
20 P-Gun
21 P-Coll
22 Divided RF
23 1 Mhz Clock
24 empty
25 empty
26 empty 
27 dye out (1MHz)
28 empty
29 detector in (1MHz)
30 Laser step complete
31 Laser scan complete
  91   Mon Apr 4 19:05:57 2022 CarstenDAQCooler Frequency Signals Ion current not connected until now
Up to now the signals for 
Ion Current
Cooler elctron current
Cooler voltage (frequency)
were not connected to the DAQs et al.

Cables in the "rded corner", i.e. where their original soruce is were not connected !!!
  90   Mon Apr 4 17:26:48 2022 Jan GloriusDAQMSCF shaper settings
attached are the current shaper settings.

list of currently connected channels:
ch2: mid x1
ch4: Cu  x1
ch6: mid x2
ch8: Cu  x2
ch9: XUV x1
ch10:XUV x2
Attachment 1: setting_e142.start3
1649085859
Mon Apr  4 17:24:19 CEST 2022
e127pi:mrcc:mscf2:getGainCommon 15
e127pi:mrcc:mscf2:getShapingTimeCommon 0
e127pi:mrcc:mscf2:getThresholdCommon 200
e127pi:mrcc:mscf2:getPzCommon  255
e127pi:mrcc:mscf2:getGain1     15
e127pi:mrcc:mscf2:getGain2     10
e127pi:mrcc:mscf2:getGain3     15
e127pi:mrcc:mscf2:getGain4     15
e127pi:mrcc:mscf2:getShapingTime1 0
e127pi:mrcc:mscf2:getShapingTime2 0
e127pi:mrcc:mscf2:getShapingTime3 0
e127pi:mrcc:mscf2:getShapingTime4 1
e127pi:mrcc:mscf2:getThreshold1 255
e127pi:mrcc:mscf2:getThreshold2 2
e127pi:mrcc:mscf2:getThreshold3 200
e127pi:mrcc:mscf2:getThreshold4 2
e127pi:mrcc:mscf2:getThreshold5 222
e127pi:mrcc:mscf2:getThreshold6 2
e127pi:mrcc:mscf2:getThreshold7 200
e127pi:mrcc:mscf2:getThreshold8 10
e127pi:mrcc:mscf2:getThreshold9 1
e127pi:mrcc:mscf2:getThreshold10 10
e127pi:mrcc:mscf2:getThreshold11 255
e127pi:mrcc:mscf2:getThreshold12 255
e127pi:mrcc:mscf2:getThreshold13 100
e127pi:mrcc:mscf2:getThreshold14 255
e127pi:mrcc:mscf2:getThreshold15 255
e127pi:mrcc:mscf2:getThreshold16 255
e127pi:mrcc:mscf2:getPz1       100
e127pi:mrcc:mscf2:getPz2       100
e127pi:mrcc:mscf2:getPz3       100
e127pi:mrcc:mscf2:getPz4       100
e127pi:mrcc:mscf2:getPz5       100
e127pi:mrcc:mscf2:getPz6       100
e127pi:mrcc:mscf2:getPz7       100
e127pi:mrcc:mscf2:getPz8       100
e127pi:mrcc:mscf2:getPz9       100
e127pi:mrcc:mscf2:getPz10      100
e127pi:mrcc:mscf2:getPz11      100
e127pi:mrcc:mscf2:getPz12      100
e127pi:mrcc:mscf2:getPz13      100
e127pi:mrcc:mscf2:getPz14      100
e127pi:mrcc:mscf2:getPz15      100
e127pi:mrcc:mscf2:getPz16      100
e127pi:mrcc:mscf2:getSingleChMode 1
e127pi:mrcc:mscf2:getRcMode    1
e127pi:mrcc:mscf2:getAutoPZ    18
e127pi:mrcc:mscf2:getMultiplicityHi 8
e127pi:mrcc:mscf2:getMultiplicityLo 0
e127pi:mrcc:mscf2:getSumTrgThresh 18
e127pi:mrcc:mscf2:getBlrOn     1
e127pi:mrcc:mscf2:getCoincTime 121
e127pi:mrcc:mscf2:getThreshOffset 70
e127pi:mrcc:mscf2:getShaperOffset 35
e127pi:mrcc:mscf2:getBlrThresh 25
e127pi:mrcc:mscf2:getECLDelay  18
  89   Mon Apr 4 16:26:04 2022 CarstenDAQBackup Harddisk /External Disk
Since we cannot write on lustre, as a temproal solution two RAID 1 (mirror) USB hard disks  with cpacity 6 TB each are installed.
The disk on the lxg1297 the disk can be accessd at /meida/sdd2
an on the lxg0155 at /media/sdc2
Regular backups should be written to these disks but NOT during data taking.

If we run out of local disk space /data.localx on the machines they could also be used as target for mbs.

Pleae check regularly if there is enough spance on the local disks.
  88   Mon Apr 4 15:32:38 2022 Kristiand & SebastianDAQGo4 Backup Code
Due to some code changes (PMT over wavelength historgram) Kristian and I backuped a working Go4 code in the current go4 folder on the atplaser linux account. 
It can be found in the subfolder "working go4 code 4.4.2020"

Nevertheless, the "normal" Go4 code in the th22 folder still works.
  87   Mon Apr 4 15:27:31 2022 SebastianDAQPMT over wavelength histogram
Kristian and I tried to create a "PMT over wavelength" histogram under step2Anl/LabView.
Unfortunately, the code ist still in progress and does not work yet.

The current code can be found in the TldaAnlProc.cxx
  86   Mon Apr 4 09:10:44 2022 Ragan, Yuri, Rui-JiuRunsMeasurement
NTCAP is taking data with the beam with a stop at manipulation 5 (taking all the fragments).

1)

Start time: 09:07
Stop time:  11:31

Reference level: -25 dBm

SC_2022-04-04_09-07-57
IQ_2022-04-04_09-07-57

2)

Start time: 11:35
Stop time:  14:00

Reference level: -25 dBm

SC_2022-04-04_11-35-25
IQ_2022-04-04_11-35-25
  85   Mon Apr 4 00:19:16 2022 Ken UeberholzDAQFirstTests
New measurement:
Start: About 00:12
Stop: About 00:43
LMDfile: 229ThFirstTest7775.lmd-229ThFirstTest7776.lmd
First tries to see the bunched ions with full test experiment circle and detectors.
Bunching visible in xuv-anode, sa_sz, PMT-south, PMT-north.
Bunches seem to be very wide, possible wrong revolution frequency set in the DAQ.
PD NO doesn't see the laser, screen prop. still in front of the window.
7e8 ions in the SIS
Standard XUV-settings




Several DAQ crashes and errors Confused




New measurement:
Start: About 02:00
Stop: About 02:30
LMDfile: 229ThFirstTest7780.lmd
Same test with new freq: 3.90415MHZ and without screen.
Nice Bunches in particle detector. Broad bunches in detectors.
Errors in DAQ
PD not working correctly or laser wrongly setup.
4.3e8 ions in the SIS
Standard XUV-settings
Attachment 1: 44_AM.png
44_AM.png
Attachment 2: 06_AM.png
06_AM.png
  84   Sun Mar 24 06:22:00 120 Ken UeberholzDetectorsXUV-Detector Rates
Count rates were measured for the XUV-
detector for a full circle:
Cathode: -5V, shields: 0V, main coil 8A, 
sec coil 2A, 
No beam - pos 0mm: ~10 Hz
Hot beam - pos 0mm: ~5 kHZ
Cool beam - pos 147mm: ~200Hz
Attachment 1: Screenshot_20220404-000343_Gallery.jpg
Screenshot_20220404-000343_Gallery.jpg
Attachment 2: Screenshot_20220404-000327_Gallery.jpg
Screenshot_20220404-000327_Gallery.jpg
Attachment 3: Screenshot_20220404-000411_Gallery.jpg
Screenshot_20220404-000411_Gallery.jpg
  83   Sun Apr 3 18:52:30 2022 KonstantinCalibrationLaser ion beam overlap
We measured vertical and horizontal ion beam positions. Unfortunately, the horizontal scraper positions can not be manipulated
by the "Device Control" software. Robert Boywitt has supported us a lot to get the drives moving by using the expert software on
a local control PC, which can only be remotely accessed from beapc032 with the usual experiment account "atplaser". In the first
try we were only able to determine the vertical positions of a beam which was not the 229Th (positions were measured already on
Sunday, 03.04.)

Scraper ion beam position (outer->inner)
GECEDS2VU -1.3(2) mm
GECEDS1VU -0.7(2) mm


Finally, we got 229Th (Wednesday, 06.04.) and were able to measure the ion beam positions. Those are
summarized in the following table. The first values are those were the scraping begins, hence representing the
edge of the ion beam. The second values represent the central positions of the ion beam.

Scraper ion beam position (outer->inner) ion beam position (inner->outer)
GECEDS2VU -1.6(2) mm / -1.3(2) mm
GECEDS2HA -13.8(2) mm / -13.4(2) mm -4.0(2) mm / -4.6(2) mm
GECEDS1VU -1(4) mm / -0.9(2) mm
GECEDS1HA -18.1(2) mm / -17.6(2) mm -7.7(2) mm / -8.2(2) mm


Schreenshots taken at scraper positions are given in Entry 142
  82   Sun Apr 3 18:41:11 2022 Konstantin and RodolfoLaserBeam Position Stabilization
We (Konstantin and I) have optimized the TEM "laser-beam position stabilization".

- I took some pictures (screenshots) about the current setting*.
- In order to be able to move the laser position faster we increase the P-Factor of both stages to 5 (maximum value).
- In "TriggerSignals_f_MRC_04-04-2022" the fast PD defines the origin (t = 0 s).
Attachment 1: MRC_Konfiguration_MitMainAmp_03-04-2022.png
MRC_Konfiguration_MitMainAmp_03-04-2022.png
Attachment 2: MRC-ControllerSetting_03-04-2022.jpg
MRC-ControllerSetting_03-04-2022.jpg
Attachment 3: FG_SettingsMRC_03-04-2022.jpg
FG_SettingsMRC_03-04-2022.jpg
Attachment 4: TriggerSignals_f_MRC_04-04-2022.PNG
TriggerSignals_f_MRC_04-04-2022.PNG
  81   Sun Apr 3 15:34:34 2022 Ken Ueberholz  Xuv-Detektor CFD-treshhold
I co controlled all detector signals and 
adjusted the threshold to be just above 
the noise. I will double check this when 
the detector can be moved in and we have a 
beam. 
  80   Sun Apr 3 13:05:08 2022 CarstenLaserDistance of Partilce detecotrs wr.t. to electron cooler
As of Yuris post in the elog the positions (Info from H. Weick):

The postion of the particle counter behind the cooler is 21.6 m behind the middle of the cooler.
This correspond to 21.6m /108,4m = 1 / 5.02 of a full revolution (please check the present revolution frequency, i.e. for 2MHz, i.e. 500ns we have the signal approx 100ns after the ion is in the middle of the cooler).
If the detecot Nord would be used for bunch timing (only planned if detctor south is defect) the distance  is half a ring + 21.4m, beind the center  of the cooler, i.e. (54.2m+21.6m)/108.4m ~ 0.7
  79   Sun Apr 3 12:35:17 2022 MaxDAQGo 4 manual
How to start go4?:

- go to console
- change directory to '/u/atplaser/go4/th22' by typing 'cd /u/atplaser/go4/th22' in the command prompt
- [OPTIONAL]: If go4 has not been started from this shell before type '. go4login64.sh'
- go4 &
- click on Launch analysis (see picture go4_1)
- click OK on the first pop-up window
- to get current data stream: enter event source: "MBS STREAM SERVER" and name: "r4l-41" (see picture go4_2), Click Submit+Start
- to analyze old data: select old .lmd file
- click on icon with three green arrows (see picture go4_3)
- click on Analysis -> Histograms -> Step2_Anl. Relevant data can be found under: "Trending" or "TDC"





if ESR bunch frequency has changed:

- open /u/atplaser/go4/th22/TLdaAnlProc.cxx in Geany (if not already opened)
- in line 490 change variable periodInBins to current frequency (frequency in e6 between /)
- close go4 and go to console
- make clean
- make all
- reopen go4 again
Attachment 1: go4_1.png
go4_1.png
Attachment 2: go4_2.png
go4_2.png
Attachment 3: go4_3.png
go4_3.png
  78   Sun Apr 3 12:31:10 2022 Rui-Jiu Chen, Yuri, Carsten, RaganRunsMeasurement of beam with different circles
Parameters of NTCAP:

1. IQ rate 20 MSamples/s
2. Carrier frequency: 245 MHz
3. RF attenuation(dB): 40
4. IF attenuation(dB): 19.9288

Data files:
Samples/record: 2^18=262144
Records/File:2^12=4096

Masterpath:
p:/E142/iq
p:/E142/sc


1. Manipulation 1:

(ESR EXP22 02 238U92 Brandau 30March22.C1.3 WAIT FOR MANIP BY. OF O)
Data A: IQ_2022-04-03_11-37-01, SC_2022-04-03_11-37-01
Data B: IQ_2022-04-03_11-46-54, SC_2022-04-03_11-47-04


2. Manipulation 2:

(ESR EXXP22 02.23U92 Brandau SOMarch22.CIS WAIT FOR MANI BY OP O )
Data A: IQ_2022-04-03_11-56-17, SC_2022-04-03_11-56-17 (Reference level 0dBm)
Data B: IQ_2022-04-03_12-03-27, SC_2022-04-03_12-03-27 (Reference level 0dBm)
Data C: IQ_2022-04-03_12-58-00, SC_2022-04-03_12-58-00 (Reference level -25dBm, record data
for long time.)\


3. Manipulation 3:

(ESR EXP22 02 23AUS2 Branda3OMarch22C1.7 WAIT FOR MANIP BY OP)
Data A: IQ_2022-04-03_12-11-11, SC_2022-04-03_12-11-11 (Reference level 0dBm)
Data B: IQ_2022-04-03_12-18-49, SC_2022-04-03_12-18-49 (Reference level 0dBm)


4. Manipulation 1+2+3. Measuring two injections.

Data A: IQ_2022-04-03_12-26-47, SC_2022-04-03_12-26-47(REFERENCEL LEVEL 0dBm)
Data B: IQ_2022-04-03_12-26-55, SC_2022-04-03_12-26-55(Reference level -25dBm)

Preliminary result: comparison between manipulation (MP) 1,2,3 and full manipulation




Attachment 1: 202204031422502.jpg
202204031422502.jpg
Attachment 2: 202204031422501.jpg
202204031422501.jpg
Attachment 3: 20220403142250.jpg
20220403142250.jpg
Attachment 6: Comparison_between_manipulations.pdf
Comparison_between_manipulations.pdf Comparison_between_manipulations.pdf
  77   Sun Apr 3 11:40:48 2022 Shahab, YuriDetectors245 MHz Resonator tuned to new frequency
resonance frequency changed from 243.2 MHz to 244.692 MHz by reducing the value of both of the plungers from 395 to 325. Now after movement, the peak is on the resonance.
Attachment 1: Screenshot_2022-04-03_at_11.24.15.png
Screenshot_2022-04-03_at_11.24.15.png
  76   Sun Apr 3 11:01:57 2022 RodolfoAcceleratorScrapers @ E-Cooler
We the mid- and night shift (Wilfried, Simon, Patrick, Ken and me) we not able to manipulate the scrapers in the E-Cooler.

- Carsten contacted Markus concerning this issue.
- Markus replied one should follows the instructions he forward us. They are given in Entry 39 (this e-log)
- Zitat vom Markus:

"ich hatte die Scraper ja letzte Woche getestet und war zu einem vergleichbaren (Negativ-)Resultat gekommen.
Daraufhin hatte ich den Experten gebeten, die Scraper zu überprüfen, was in der Anleitung resultierte, die ich Carsten geschickt habe.
Im Gespräch habe ich verstanden, dass das Problem in der (modifizierten ?) Frontend-Software liegt.
Da nützt dann auch ein anderes Programm, ähnlich Nodal, nichts. Nodal gibt es nicht mehr, das Programm Prophelper bietet jetzt vergleichbare Möglichkeiten, aber da muss man schon wissen, was man tun will/tut."

Google translation:

"I had tested the scraper last week and had come to a comparable (negative) result.
I then asked the expert to review the scrapers, which resulted in the instructions I sent to Carsten.
During the conversation I understood that the problem lies in the (modified ?) frontend software.
Then another program, similar to Nodal, is useless. Nodal no longer exists, the Prophelper program now offers comparable options, but you have to know what you want to do/do."
  75   Sun Apr 3 10:35:20 2022 Yuri (Sergey)AcceleratorDipole correction
The ramp for moving the beam to the central orbit
To be inserted into manipulation, GE01MU1 (SC 5): 1.05969755 rad
This can be done only when one stays in the manipulation 5
Afterwards “Manipulieren” and not “An Geräte schicken”
  74   Sun Apr 3 10:28:25 2022 Yuri (Helmut Weick)AcceleratorDistance cooler - detector
Calculation from Helmut Weick
Distance e-cooler to particle detectors chamber:
“This is half of ESR plus distance target - detector. This even is on the web page”
54.28 m + 21.64 m
  73   Sun Apr 3 00:41:45 2022 Ken Ueberholz  Xuv-Detektor Signale
The Xuv-detector cabel channels seem to be 
wrongly labeled in the Messhütte (see 
picture) and are propably also wrongly 
connected. Need to be relabeled and reconnected either in the 
messhütte or in the laserlab. I will look for the best 
solution tomorrow morning. 
Attachment 1: 20220403_004944.jpg
20220403_004944.jpg
  72   Sat Apr 2 23:16:55 2022 Carsten Cu mirror and CsI moved in and out of the ring
Ken tested the Cu-mirror and CsI disk Detector. They move without a problem and don't scrape the ion beam.
  71   Sat Apr 2 22:43:36 2022 Carsten Ring set-up for 229/89+, scraped and bunched, Iel=500mA at injection and 100mA during measurment
The ring SIS/ESR were set up for 229/89+. Pölease note that this not only 1e- Th but ponteially also the isobars of Ac (0e-1)/Pa(2e-, strongest) and U(3e-).
SIS eenrgy plus 3.5 MeV/u w.r.t. to the 238U92+ settings. We nearly don't see any of the primary beam in the ring
Cooling energy is 208998 KeV (read from the ESR multimeter).
The positioning of the scrapers is automatized but needs to be checked again tomorrow.
In order to allow for a longer measurment time, the electron curent is 500mA only during injection but is decreased to 100mA during measurement (=> longer beam lifetime).

 
 
  70   Sat Apr 2 18:28:47 2022 Markus/BerndAccelerator SIS setting complete for fragments in ESR: 2022-04-02_18-09-10_SIS18_FAST_E142_20220325_110213.C1.txt
# Version: 1.2 # Comment: ParamModi Export at 2022-04-02T18:09:36.402593+02:00[Europe/Berlin] # Context: SIS18_FAST_E142_20220325_110213.C1 # Columns: PARAMETERNAME,VALUE,UNIT,BEAMPROCESSPURPOSE 
LOGICAL.GTK7MU5/HKICK,0.0,rad,TRANSFER_INJECTION LOGICAL.GTK7MU5/HKICK_THEO,0.0018,rad,TRANSFER_INJECTION LOGICAL.GTK7BC1L/HKICK,0.0,rad,TRANSFER_INJECTION LOGICAL.GTK7BC1L/HKICK_THEO,-0.0035,rad,TRANSFER_INJECTION 
LOGICAL.GTK7BC1L/THIGH_S,7.0E-5,s,TRANSFER_INJECTION GTK3MV4_TO_PLTKMH2_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT 
GTK3MV4_TO_PLTKMH2_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_INJECTION GTK3MV4_TO_PLTKMH2_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET 
LOGICAL.GTK9MB1V/BUMPER_VKICK_S,0.0,rad,TRANSFER_INJECTION LOGICAL.GS12ME1I/ESEP_HKICK_S,0.0,rad,TRANSFER_INJECTION LOGICAL.GS12ME1I/ESEP_K0L_THEO_S,-0.049,rad,TRANSFER_INJECTION 
LOGICAL.GS12MU3I/HKICK,0.0,rad,TRANSFER_INJECTION LOGICAL.GS12MU3I/K0L_THEO,-0.1535,rad,TRANSFER_INJECTION PLTKMH2_TO_SIS18_BEAM/MAX_PART_RATE_S,1.0E12,Hz,TRANSFER_INJECTION 
PLTKMH2_TO_SIS18_BUMPER/BUMPER_CURVATURE_S,[0, 0],s,TRANSFER_INJECTION PLTKMH2_TO_SIS18_BUMPER/TFALL_S,1.7E-4,s,TRANSFER_INJECTION PLTKMH2_TO_SIS18_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT 
PLTKMH2_TO_SIS18_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_INJECTION PLTKMH2_TO_SIS18_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET LOGICAL.GS00BS1W/ACTIVE_S,false,,RING_EXTRACTION_FAST 
LOGICAL.GS00BS1W/QRIPPLE_AMPL_START_S,0.0,V,RING_EXTRACTION_FAST LOGICAL.GS00BS1W/QRIPPLE_FREQ_START_S,0.0,Hz,RING_EXTRACTION_FAST LOGICAL.GS01MU1A/HKICK_COC,0.0,rad,RING_INJECTION 
LOGICAL.GS01MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS06MU4/BYP_HKICK_DELTA_S,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS06MU4/BYP_HKICK_START_S,0.0,rad,RING_EXTRACTION_FAST 
LOGICAL.GS01QS1F/B1L_CHIMNEY_S,6.876008,T,BEAMOUT_RESET LOGICAL.GS01KM2DV/VKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS01KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST 
LOGICAL.GS01QS2D/B1L_CHIMNEY_S,-6.474563,T,BEAMOUT_RESET LOGICAL.GS02MU1A/HKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS02MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS02KM2DV/VKICK_COC,0.0,rad,RING_INJECTION 
LOGICAL.GS02KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS03MU1A/HKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS03MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST 
LOGICAL.GS03KH1I/SCALE_B0L_IPM_S,1.0,,RING_INJECTION LOGICAL.GS03KH1I/SCALE_B0L_IPM_S,---,,RING_RAMP LOGICAL.GS03KV1I/SCALE_B0L_IPM_S,1.0,,RING_INJECTION LOGICAL.GS03KV1I/SCALE_B0L_IPM_S,---,,RING_RAMP 
LOGICAL.GS03KH2I/SCALE_B0L_IPM_S,1.0,,RING_INJECTION LOGICAL.GS03KH2I/SCALE_B0L_IPM_S,---,,RING_RAMP LOGICAL.GS03KV2I/SCALE_B0L_IPM_S,1.0,,RING_INJECTION LOGICAL.GS03KV2I/SCALE_B0L_IPM_S,---,,RING_RAMP 
LOGICAL.GS03KH3I/SCALE_B0L_IPM_S,1.0,,RING_INJECTION LOGICAL.GS03KH3I/SCALE_B0L_IPM_S,---,,RING_RAMP LOGICAL.GS03KV3I/SCALE_B0L_IPM_S,1.0,,RING_INJECTION LOGICAL.GS03KV3I/SCALE_B0L_IPM_S,---,,RING_RAMP 
LOGICAL.GS03KM2DV/VKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS03KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS04MU2A/HKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS04MU2A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST 
LOGICAL.GS04ME1E/ACTIVE_S,false,,RING_EXTRACTION_FAST LOGICAL.GS04KM2DV/VKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS04KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS05MU1A/HKICK_COC,0.0,rad,RING_INJECTION 
LOGICAL.GS05MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS05MQ1/K0L_S,0.0,rad,RING_INJECTION LOGICAL.GS05MQ1/K0L_S,---,rad,RING_RAMP LOGICAL.GS05MQ1/K0L_S,0.0,rad,RING_PRE_EXTRACTION LOGICAL.GS05MQ1/K0L_S,--
-,rad,RING_EXTRACTION_FAST LOGICAL.GS05MQ1/QKICKER_ACTIVE_B,---,,RING_INJECTION LOGICAL.GS05MQ1/QKICKER_ACTIVE_B,---,,RING_PRE_EXTRACTION LOGICAL.GS05KM2DV/VKICK_COC,0.0,rad,RING_INJECTION 
LOGICAL.GS05KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS06MU2A/HKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS06MU2A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS06KM2DV/VKICK_COC,0.0,rad,RING_INJECTION 
LOGICAL.GS06KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS07MU1A/HKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS07MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS07KM2DV/VKICK_COC,0.0,rad,RING_INJECTION 
LOGICAL.GS07KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS08MU1A/HKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS08MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS08KM2DV/VKICK_COC,0.0,rad,RING_INJECTION 
LOGICAL.GS08KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS09MU1A/HKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS09MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS09KM2DV/VKICK_COC,0.0,rad,RING_INJECTION 
LOGICAL.GS09KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS10MU1A/HKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS10MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS10KX1/HKICK_COC,0.0,rad,RING_INJECTION 
LOGICAL.GS10KX1/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS10KX2/HKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS10KX2/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS10KM2DV/VKICK_COC,0.0,rad,RING_INJECTION 
LOGICAL.GS10KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS11MU1A/HKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS11MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS11MU2/ACTIVE_S,false,,RING_INJECTION 
LOGICAL.GS11MU2/B0L_CHIMNEY_S,4.82717365,Tm,BEAMOUT_RESET LOGICAL.GS11MU2/MEC_RELDAMPL_S,0.0,,RING_INJECTION LOGICAL.GS11MU2/MEC_RELDTIME_S,0.0,,RING_INJECTION LOGICAL.GS11KM2DV/VKICK_COC,0.0,rad,RING_INJECTION 
LOGICAL.GS11KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST LOGICAL.GS12MU1A/HKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS12MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST 
LOGICAL.GS12QS1F/B1L_CHIMNEY_S,6.876008,T,BEAMOUT_RESET LOGICAL.GS12KM2DV/VKICK_COC,0.0,rad,RING_INJECTION LOGICAL.GS12KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST 
LOGICAL.GS12QS2D/B1L_CHIMNEY_S,-6.474563,T,BEAMOUT_RESET LOGICAL.GS12QS3T/B1L_CHIMNEY_S,0.580287,T,BEAMOUT_RESET SIS18B2B/B2B_KICK_START_OFFSET_S,-2.5E-5,s,RING_EXTRACTION_FAST 
SIS18B2B/B2B_MODE_RAW_S,B2EXTRACTION,,RING_EXTRACTION_FAST SIS18B2B/B2B_PHASE_DIFFERENCE_S,0.0,deg,RING_EXTRACTION_FAST SIS18B2B/B2B_PREDEFINED_BY_COUPLING_B,true,,RING_EXTRACTION_FAST 
SIS18B2B/B2B_TRIGGER_OFFSET_S,8.6,deg,RING_EXTRACTION_FAST SIS18BEAM/BEAM_MODE_S,1,,RING_INJECTION SIS18BEAM/BUCKETFILL_RAW_S,[[0.0, 0.0]],,RING_INJECTION SIS18BEAM/BUCKETFILL_RAW_S,[[0.0, 1.4]],,RING_BUNCHING 
SIS18BEAM/BUCKETFILL_RAW_S,[[1.4, 2.0]],,RING_RAMP SIS18BEAM/BUCKETFILL_RAW_S,[[2.0, 3.0]],,RING_RF_MANIPULATION SIS18BEAM/BUCKETFILL_RAW_S,[[3.0, 10.0]],,RING_PRE_EXTRACTION SIS18BEAM/BUCKETFILL_RAW_S,[[10.0, 
10.0]],,RING_EXTRACTION_FAST SIS18BEAM/BUCKETFILL_RAW_S,[[10.0, 10.0]],,RING_POST_EXTRACTION SIS18BEAM/CHIMNEY_B,true,,BEAMOUT_RESET SIS18BEAM/CH_END_S,-4.09258183,,RING_INJECTION 
SIS18BEAM/CH_END_S,-6.45521578,,RING_RAMP SIS18BEAM/CH_END_S,---,,RING_PRE_EXTRACTION SIS18BEAM/CV_END_S,-5.63105355,,RING_INJECTION SIS18BEAM/CV_END_S,-4.10566257,,RING_RAMP SIS18BEAM/CV_END_S,--
-,,RING_PRE_EXTRACTION SIS18BEAM/DELTAR,-0.001,m,RING_INJECTION SIS18BEAM/DELTAR,0.0,m,RING_EXTRACTION_FAST SIS18BEAM/DPFREV,0.0,,RING_INJECTION SIS18BEAM/DPFREV,0.0,,RING_EXTRACTION_FAST SIS18BEAM/DP_OVER_P_S,8.0E-
4,,RING_INJECTION SIS18BEAM/ELEMENT_S,92,,RING_INJECTION SIS18BEAM/E_S,1.1205E7,eV/u,RING_INJECTION SIS18BEAM/E_S,5.395E8,eV/u,RING_RAMP SIS18BEAM/FINAL_HARMONIC_S,1,,RING_RF_MANIPULATION 
SIS18BEAM/H_S,4,,RING_INJECTION SIS18BEAM/INJ_EMIH_S,1.5E-4,m*rad,RING_INJECTION SIS18BEAM/INJ_EMIV_S,5.0E-5,m*rad,RING_INJECTION SIS18BEAM/ISOTOPE_S,238,,RING_INJECTION SIS18BEAM/KL_AMPL_S,0.0,,RING_INJECTION 
SIS18BEAM/KL_AMPL_S,0.0,,RING_BUNCHING SIS18BEAM/KL_AMPL_S,0.0,,RING_RAMP SIS18BEAM/KL_AMPL_S,0.0,,RING_RF_MANIPULATION SIS18BEAM/KL_AMPL_S,0.0,,RING_PRE_EXTRACTION SIS18BEAM/KL_AMPL_S,0.0,,RING_EXTRACTION_FAST 
SIS18BEAM/KL_AMPL_S,0.0,,RING_POST_EXTRACTION SIS18BEAM/KL_HARM_S,1,,RING_INJECTION SIS18BEAM/KL_HARM_S,1,,RING_BUNCHING SIS18BEAM/KL_HARM_S,1,,RING_RAMP SIS18BEAM/KL_HARM_S,1,,RING_RF_MANIPULATION 
SIS18BEAM/KL_HARM_S,1,,RING_PRE_EXTRACTION SIS18BEAM/KL_HARM_S,1,,RING_EXTRACTION_FAST SIS18BEAM/KL_HARM_S,1,,RING_POST_EXTRACTION SIS18BEAM/KL_OFFSET_S,0.0,,RING_INJECTION 
SIS18BEAM/KL_OFFSET_S,0.0,,RING_BUNCHING SIS18BEAM/KL_OFFSET_S,0.0,,RING_RAMP SIS18BEAM/KL_OFFSET_S,0.0,,RING_RF_MANIPULATION SIS18BEAM/KL_OFFSET_S,0.0,,RING_PRE_EXTRACTION 
SIS18BEAM/KL_OFFSET_S,0.0,,RING_EXTRACTION_FAST SIS18BEAM/KL_OFFSET_S,0.0,,RING_POST_EXTRACTION SIS18BEAM/KL_PHASE_S,0.0,deg,RING_INJECTION SIS18BEAM/KL_PHASE_S,0.0,deg,RING_BUNCHING 
SIS18BEAM/KL_PHASE_S,0.0,deg,RING_RAMP SIS18BEAM/KL_PHASE_S,0.0,deg,RING_RF_MANIPULATION SIS18BEAM/KL_PHASE_S,0.0,deg,RING_PRE_EXTRACTION SIS18BEAM/KL_PHASE_S,0.0,deg,RING_EXTRACTION_FAST 
SIS18BEAM/KL_PHASE_S,0.0,deg,RING_POST_EXTRACTION SIS18BEAM/NPARTICLES_S,1.0E8,,RING_INJECTION SIS18BEAM/QH_END_S,4.27,,RING_INJECTION SIS18BEAM/QH_END_S,4.27,,RING_RAMP SIS18BEAM/QH_END_S,4.3,,RING_PRE_EXTRACTION 
SIS18BEAM/QV_END_S,3.24,,RING_INJECTION SIS18BEAM/QV_END_S,3.24,,RING_RAMP SIS18BEAM/QV_END_S,3.14,,RING_PRE_EXTRACTION SIS18BEAM/Q_S,73,,RING_INJECTION SIS18BTM/BTM_DELAYS_INPUT_S,[],s,RING_INJECTION 
SIS18BTM/BTM_DELAYS_INPUT_S,[],s,RING_EXTRACTION_FAST SIS18BTM/BTM_DEVICES_INPUT_S,[],,RING_INJECTION SIS18BTM/BTM_DEVICES_INPUT_S,[],,RING_EXTRACTION_FAST SIS18BTM/BTM_EVENTS_INPUT_S,[],,RING_INJECTION 
SIS18BTM/BTM_EVENTS_INPUT_S,[],,RING_EXTRACTION_FAST SIS18BTM/BTM_EXTRACTION_POINTS_INPUT_S,[],,RING_INJECTION SIS18BTM/BTM_EXTRACTION_POINTS_INPUT_S,[],,RING_EXTRACTION_FAST SIS18BUMPER/BUMPER_CURVATURE_S,[0, 
0],s,RING_INJECTION SIS18BUMPER/BUMPER_KNOB_S,70.0,mm,RING_INJECTION SIS18BUMPER/BUMPER_RELDSLOPE_S,0.0,,RING_INJECTION SIS18BUMPER/TFALL_S,1.8E-4,s,RING_INJECTION 
SIS18EKICKER/KICKER_KNOB_S,6.5,mrad,RING_EXTRACTION_FAST SIS18EKICKER/KICKER_MODE_S,1,,RING_EXTRACTION_FAST SIS18EKICKER/KICKER_START_S,76.5,deg,RING_EXTRACTION_FAST SIS18EKICKER/KICKER_TOFFSET1_S,2.0E-
6,s,RING_EXTRACTION_FAST SIS18EKICKER/NBUNCH1_INPUT_S,4,,RING_EXTRACTION_FAST SIS18EKICKER/TGX_TIMING_TRIGGERED_B,---,,RING_EXTRACTION_FAST SIS18IPM/IPM_ACTIVE_B,false,,RING_INJECTION 
SIS18IPM/IPM_PLANE_S,HORIZONTAL,,RING_INJECTION SIS18OPTICS/OPTIC_NAME_S,SIS18_STANDARD_OPTICS_TABLE,,RING_INJECTION SIS18OPTICS/SIGMA_S,0.0,,RING_INJECTION SIS18OPTICS/SIGMA_S,0.0,,RING_RAMP 
SIS18OPTICS/SIGMA_S,0.0,,RING_PRE_EXTRACTION SIS18OPTICS/TAU_ENDPOINT_S,0.0,,RING_RAMP SIS18OPTICS/TAU_ENDPOINT_S,0.0,,RING_PRE_EXTRACTION SIS18OPTICS/TAU_END_S,0.0,,RING_INJECTION 
SIS18OPTICS/TAU_END_S,1.0,,RING_RAMP SIS18OPTICS/TAU_END_S,1.0,,RING_PRE_EXTRACTION SIS18OPTICS/TAU_NLP_S,0.0,,RING_RAMP SIS18OPTICS/TAU_NLP_S,0.0,,RING_PRE_EXTRACTION SIS18ORBIT/AMPL_ECB_CORR,0.0,,RING_INJECTION 
SIS18ORBIT/COH01,0.009000000000000001,m,RING_INJECTION SIS18ORBIT/COH01,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COH02,-0.004,m,RING_INJECTION SIS18ORBIT/COH02,0.0,m,RING_EXTRACTION_FAST 
SIS18ORBIT/COH03,-0.006,m,RING_INJECTION SIS18ORBIT/COH03,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COH04,0.008,m,RING_INJECTION SIS18ORBIT/COH04,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COH05,-0.004,m,RING_INJECTION 
SIS18ORBIT/COH05,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COH06,-0.003,m,RING_INJECTION SIS18ORBIT/COH06,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COH07,0.005,m,RING_INJECTION SIS18ORBIT/COH07,0.0,m,RING_EXTRACTION_FAST 
SIS18ORBIT/COH08,-0.003,m,RING_INJECTION SIS18ORBIT/COH08,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COH09,0.004,m,RING_INJECTION SIS18ORBIT/COH09,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COH10,0.008,m,RING_INJECTION 
SIS18ORBIT/COH10,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COH11,-0.004,m,RING_INJECTION SIS18ORBIT/COH11,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COH12,-0.01,m,RING_INJECTION SIS18ORBIT/COH12,0.0,m,RING_EXTRACTION_FAST 
SIS18ORBIT/COV01,0.005,m,RING_INJECTION SIS18ORBIT/COV01,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COV02,0.004,m,RING_INJECTION SIS18ORBIT/COV02,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COV03,-0.004,m,RING_INJECTION 
SIS18ORBIT/COV03,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COV04,-0.002,m,RING_INJECTION SIS18ORBIT/COV04,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COV05,0.005,m,RING_INJECTION SIS18ORBIT/COV05,0.0,m,RING_EXTRACTION_FAST 
SIS18ORBIT/COV06,-0.004,m,RING_INJECTION SIS18ORBIT/COV06,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COV07,0.0,m,RING_INJECTION SIS18ORBIT/COV07,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COV08,0.0,m,RING_INJECTION 
SIS18ORBIT/COV08,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COV09,0.0,m,RING_INJECTION SIS18ORBIT/COV09,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COV10,0.002,m,RING_INJECTION SIS18ORBIT/COV10,0.0,m,RING_EXTRACTION_FAST 
SIS18ORBIT/COV11,-0.004,m,RING_INJECTION SIS18ORBIT/COV11,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/COV12,-0.004,m,RING_INJECTION SIS18ORBIT/COV12,0.0,m,RING_EXTRACTION_FAST 
SIS18ORBIT/EXTESEP_START_S,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/EXTMSEP_START_S,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/EXT_ESMS_START_S,0.0,m,RING_EXTRACTION_FAST SIS18ORBIT/XANG_ECB,0.0,rad,RING_INJECTION 
SIS18ORBIT/XPOS_ECB,-0.001,m,RING_INJECTION SIS18ORBIT/YANG_ECB,0.0,rad,RING_INJECTION SIS18ORBIT/YPOS_ECB,0.0,m,RING_INJECTION SIS18QKICKER/QKICKER_EVENT_POSITION_S,0.5,,RING_INJECTION 
SIS18QKICKER/QKICKER_EVENT_POSITION_S,0.5,,RING_PRE_EXTRACTION SIS18RF/BUNCH_ROTATE_ACTIVE_B,false,,RING_EXTRACTION_FAST SIS18RF/BUNCH_ROTATE_OFFSET_S,9.999999999999999E-5,s,RING_EXTRACTION_FAST 
SIS18RF/CAVITYPATTERN_S,[true, false, false, true, true],,RING_INJECTION SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_INJECTION SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_BUNCHING SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_RAMP 
SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_RF_MANIPULATION SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_PRE_EXTRACTION SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_EXTRACTION_FAST SIS18RF/CAVITY_MODE_2D_RAW_S,
[],,RING_POST_EXTRACTION SIS18RF/CAVITY_TRANSFER_B,false,,RING_INJECTION SIS18RF/DUALH_ACTIVE_S,false,,RING_INJECTION SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_INJECTION SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_BUNCHING 
SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_RAMP SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_RF_MANIPULATION SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_PRE_EXTRACTION SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_EXTRACTION_FAST 
SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_POST_EXTRACTION SIS18RF/PHASE_CHANGE_B,false,,RING_INJECTION SIS18RF/PHASE_OFFSET_S,40.0,deg,RING_INJECTION SIS18RF/RF_MANIPULATION_RAW_S,[],,RING_RAMP 
SIS18RF/RF_MANIPULATION_RAW_S,[],,RING_RF_MANIPULATION SIS18RF/RF_MANIPULATION_TIMES_S,---,s,RING_RAMP SIS18RF/RF_MANIPULATION_TIMES_S,[0.065, 0.085],s,RING_RF_MANIPULATION SIS18RF/SEQUENTIAL_RF_B,false,,RING_INJECTION 
SIS18RF/SIS18_STANDARD_RF_MANI_ENUM_S,REBUNCHING,,RING_RF_MANIPULATION SIS18RF/USE_CAVITY_MODE_MAP_B,true,,RING_INJECTION SIS18SYSTEM/GENERATE_MASP_MASKED_DEVICES_B,true,,RING_INJECTION 
SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_INJECTION SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_BUNCHING SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_RAMP 
SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_RF_MANIPULATION SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_PRE_EXTRACTION SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_EXTRACTION_FAST 
SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_POST_EXTRACTION SIS18TIMEPARAM/BDOT_S,[2.0, 2.0],T/s,BEAMOUT_INIT SIS18TIMEPARAM/BDOT_S,[3.0, 3.0],T/s,RING_RAMP SIS18TIMEPARAM/BDOT_S,[4.0, 4.0],T/s,BEAMOUT_RESET 
SIS18TIMEPARAM/BP_INDEX_B,[false, false, false],,RING_INJECTION SIS18TIMEPARAM/BP_INDEX_S,[-1, -1, -1],,RING_INJECTION SIS18TIMEPARAM/CHOPPER_OFFSET_S,6.0E-5,s,RING_INJECTION SIS18TIMEPARAM/EVENT_B,[false, false, 
false],,RING_INJECTION SIS18TIMEPARAM/EVENT_ID_S,[0, 0, 0],,RING_INJECTION SIS18TIMEPARAM/MINPDIST_S,0.0,,BEAMOUT_INIT SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_INJECTION SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_BUNCHING 
SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_RAMP SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_RF_MANIPULATION SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_PRE_EXTRACTION SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_EXTRACTION_FAST 
SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_POST_EXTRACTION SIS18TIMEPARAM/MINPDIST_S,0.0,,BEAMOUT_RESET SIS18TIMEPARAM/NINJECTIONS_S,1,,RING_INJECTION SIS18TIMEPARAM/OFFSET_S,[0.0, 0.0, 0.0],s,RING_INJECTION 
SIS18TIMEPARAM/TGRID_S,0.002,s,BEAMOUT_INIT SIS18TIMEPARAM/TGRID_S,0.002,s,RING_INJECTION SIS18TIMEPARAM/TGRID_S,0.002,s,RING_BUNCHING SIS18TIMEPARAM/TGRID_S,0.002,s,RING_RAMP 
SIS18TIMEPARAM/TGRID_S,0.002,s,RING_RF_MANIPULATION SIS18TIMEPARAM/TGRID_S,0.002,s,RING_PRE_EXTRACTION SIS18TIMEPARAM/TGRID_S,0.002,s,RING_EXTRACTION_FAST SIS18TIMEPARAM/TGRID_S,0.002,s,RING_POST_EXTRACTION 
SIS18TIMEPARAM/TGRID_S,0.002,s,BEAMOUT_RESET SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_INJECTION 
SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_BUNCHING SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_RAMP SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_PRE_EXTRACTION 
SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_EXTRACTION_FAST SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_POST_EXTRACTION SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET 
SIS18TIMEPARAM/TMEASURE_S,0.0,s,BEAMOUT_INIT SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_INJECTION SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_BUNCHING SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_RAMP 
SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_RF_MANIPULATION SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_PRE_EXTRACTION SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_EXTRACTION_FAST 
SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_POST_EXTRACTION SIS18TIMEPARAM/TMEASURE_S,0.0,s,BEAMOUT_RESET SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,BEAMOUT_INIT SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_INJECTION 
SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_BUNCHING SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_RAMP SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_RF_MANIPULATION SIS18TIMEPARAM/TROUND_S,[0.032, 
0.032],s,RING_PRE_EXTRACTION SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_EXTRACTION_FAST SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_POST_EXTRACTION SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,BEAMOUT_RESET 
SIS18TIMEPARAM/T_BP_LENGTH_S,0.17200000000000001,s,BEAMOUT_INIT SIS18TIMEPARAM/T_BP_LENGTH_S,0.5,s,RING_INJECTION SIS18TIMEPARAM/T_BP_LENGTH_S,0.032,s,RING_BUNCHING SIS18TIMEPARAM/T_BP_LENGTH_S,0.08,s,RING_RAMP 
SIS18TIMEPARAM/T_BP_LENGTH_S,0.16,s,RING_RF_MANIPULATION SIS18TIMEPARAM/T_BP_LENGTH_S,0.04,s,RING_PRE_EXTRACTION SIS18TIMEPARAM/T_BP_LENGTH_S,0.016,s,RING_EXTRACTION_FAST 
SIS18TIMEPARAM/T_BP_LENGTH_S,0.04,s,RING_POST_EXTRACTION SIS18TIMEPARAM/T_BP_LENGTH_S,0.084,s,BEAMOUT_RESET SIS18TIMEPARAM/T_WAIT_CHIMNEY_S,1.0,s,BEAMOUT_RESET SIS18TIMEPARAM/T_WAIT_S,0.04,s,BEAMOUT_INIT 
SIS18TIMEPARAM/T_WAIT_S,0.0,s,RING_INJECTION SIS18TIMEPARAM/T_WAIT_S,0.0,s,RING_BUNCHING SIS18TIMEPARAM/T_WAIT_S,0.04,s,RING_RAMP SIS18TIMEPARAM/T_WAIT_S,0.0,s,RING_RF_MANIPULATION 
SIS18TIMEPARAM/T_WAIT_S,0.0,s,RING_PRE_EXTRACTION SIS18TIMEPARAM/T_WAIT_S,0.0,s,RING_EXTRACTION_FAST SIS18TIMEPARAM/T_WAIT_S,0.0,s,RING_POST_EXTRACTION SIS18TIMEPARAM/T_WAIT_S,0.04,s,BEAMOUT_RESET 
SIS18TIMEPARAM/UNILAC_BREQ_OFFSET_S,-0.046,s,RING_INJECTION SIS18TIMEPARAM/UNILAC_NOBEAM_INPUT_S,false,,RING_INJECTION SIS18TIMEPARAM/UNILAC_NO_REQUEST_B,false,,RING_INJECTION SIS18TIMEPARAM/UNILAC_TOFFSET_S,4.5E-
5,s,RING_INJECTION SIS18TIMEPARAM/UNILAC_VIRTACC_RAW_S,9,,RING_INJECTION LOGICAL.GSCEKY2G/TOROID_I,5.6826,A,ECOOLER_COOLING LOGICAL.GSCEKY4K/TOROID_I,5.6826,A,ECOOLER_COOLING 
LOGICAL.GSCEMT4K/SOLENOID_I,360.402,A,ECOOLER_COOLING LOGICAL.GSCEBG1E/DELUACC_S,110.0,V,ECOOLER_COOLING LOGICAL.GSCEBG1E/UACC_START_END_S,[6413.9328, 6413.9328],V,ECOOLER_COOLING 
LOGICAL.GSCEBG2T/U_GUN_START_END_S,[1667.5698, 1667.5698],V,ECOOLER_COOLING LOGICAL.GSCEBG3T/U_AN_START_END_S,[700.0, 700.0],V,ECOOLER_COOLING LOGICAL.GSCEBG4T/U_SUPPR_START_END_S,[530.0, 530.0],V,ECOOLER_COOLING 
LOGICAL.GSCEBG5T/U_S,3000.0,V,ECOOLER_COOLING LOGICAL.GSCEBG1D/U_S,0.0,V,ECOOLER_COOLING LOGICAL.GSCEBG2D/U_S,0.0,V,ECOOLER_COOLING LOGICAL.GSCEBG3D/U_START_END_S,[800.0, 800.0],V,ECOOLER_COOLING 
LOGICAL.GSCEBG4D/U_START_END_S,[800.0, 800.0],V,ECOOLER_COOLING LOGICAL.GSCEMO5K/SOLENOID_GUN_I,382.077,A,ECOOLER_COOLING LOGICAL.GSCEKX1G/STEERER_POS_S,-0.002,m,ECOOLER_COOLING 
LOGICAL.GSCEKY1G/STEERER_POS_S,0.002,m,ECOOLER_COOLING LOGICAL.GSCEKX3C/STEERER_ANG_S,5.0E-4,rad,ECOOLER_COOLING LOGICAL.GSCEKY3C/STEERER_ANG_S,-2.0E-4,rad,ECOOLER_COOLING 
LOGICAL.GSCEKX5K/STEERER_POS_S,0.002,m,ECOOLER_COOLING LOGICAL.GSCEKY5K/STEERER_POS_S,-0.002,m,ECOOLER_COOLING LOGICAL.GSCEKD1D/SOLENOID_I,0.682,A,ECOOLER_COOLING 
LOGICAL.GSCEKD2D/SOLENOID_I,2.35,A,ECOOLER_COOLING LOGICAL.SIS18_COOLER_EAUX/BETAE_S,0.1537,,ECOOLER_COOLING LOGICAL.SIS18_COOLER_EAUX/NERF_S,1.7612405761647664E13,1/m³,ECOOLER_COOLING 
LOGICAL.SIS18_COOLER_EAUX/UACC_S,6146.806,V,ECOOLER_COOLING LOGICAL.SIS18_COOLER_EAUX/USC_START_END_S,[157.1268, 157.1268],V,ECOOLER_COOLING SIS18_COOLER_EBEAM/BT,0.06,T,ECOOLER_COOLING 
SIS18_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,ECOOLER_COOLING SIS18_COOLER_EBEAM/EXPF_S,3.0,,ECOOLER_COOLING SIS18_COOLER_EBEAM/GAMME_USER,1.001,,ECOOLER_COOLING SIS18_COOLER_EBEAM/IE_S,0.2,A,ECOOLER_COOLING 
SIS18_COOLER_EBEAM/OVERWRITE_GAMME_B,false,,ECOOLER_COOLING SIS18_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT SIS18_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,ECOOLER_COOLING 
SIS18_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,STATIC SIS18_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET LOGICAL.GTE1KY1/VKICK,-0.0022,rad,TRANSFER_EXTRACTION 
LOGICAL.GTE1QD11/K1L,0.2017,1/m,TRANSFER_EXTRACTION LOGICAL.GTE1QD12/K1L,-0.2374,1/m,TRANSFER_EXTRACTION LOGICAL.GTS1MU1/HKICK,0.0,rad,TRANSFER_EXTRACTION 
SIS18_TO_GTS1MU1_OPTICS/OPTIC_NAME_S,SIS18_TE_ESR_LEGACY,,TRANSFER_EXTRACTION SIS18_TO_GTS1MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT 
SIS18_TO_GTS1MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_EXTRACTION SIS18_TO_GTS1MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET LOGICAL.GTE2KX1/HKICK,-0.002,rad,TRANSFER_EXTRACTION 
LOGICAL.GTE2QT11/K1L,0.2487,1/m,TRANSFER_EXTRACTION LOGICAL.GTE2QT12/K1L,-0.4301,1/m,TRANSFER_EXTRACTION LOGICAL.GTE2QT13/K1L,0.3493,1/m,TRANSFER_EXTRACTION LOGICAL.GTE3MU1/HKICK,-0.001,rad,TRANSFER_EXTRACTION 
GTS1MU1_TO_GTE3MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT GTS1MU1_TO_GTE3MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_EXTRACTION 
GTS1MU1_TO_GTE3MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET LOGICAL.GTE3KY1/VKICK,0.0,rad,TRANSFER_EXTRACTION LOGICAL.GTE3QD11/K1L,0.4885,1/m,TRANSFER_EXTRACTION 
LOGICAL.GTE3QD12/K1L,-0.5615,1/m,TRANSFER_EXTRACTION GTE3MU1_TO_GTE3UF_BEAM/E_S,5.395E8,eV/u,TRANSFER_EXTRACTION GTE3MU1_TO_GTE3UF_BEAM/Q_S,73,,TRANSFER_EXTRACTION 
GTE3MU1_TO_GTS6MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT GTE3MU1_TO_GTS6MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_EXTRACTION 
GTE3MU1_TO_GTS6MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET LOGICAL.GTE3UF/OVERWRITE_TARGET_EOUT_B,true,,TRANSFER_EXTRACTION 
LOGICAL.GTE3UF/TARGET_E_USER_S,3.748E8,eV/u,TRANSFER_EXTRACTION LOGICAL.GTE3UF/TARGET_INBEAM_B,true,,TRANSFER_EXTRACTION LOGICAL.GTE3UF/TARGET_PROPAGATE_B,true,,TRANSFER_EXTRACTION 
LOGICAL.GTE3UF/TARGET_Q_PROD_S,92,,TRANSFER_EXTRACTION LOGICAL.GTE4QD11/K1L,-0.5625,1/m,TRANSFER_EXTRACTION LOGICAL.GTE4QD12/K1L,0.4554,1/m,TRANSFER_EXTRACTION 
LOGICAL.GTE4MU1/HKICK,0.0011,rad,TRANSFER_EXTRACTION LOGICAL.GTE4KY1/VKICK,-6.0E-4,rad,TRANSFER_EXTRACTION LOGICAL.GTE4QT21/K1L,0.3805,1/m,TRANSFER_EXTRACTION LOGICAL.GTE4QT22/K1L,-0.4588,1/m,TRANSFER_EXTRACTION 
LOGICAL.GTE4QT23/K1L,0.2175,1/m,TRANSFER_EXTRACTION LOGICAL.GTE4MU2/HKICK,-3.0E-4,rad,TRANSFER_EXTRACTION LOGICAL.GTE4KY2/VKICK,0.0,rad,TRANSFER_EXTRACTION LOGICAL.GTE4QT31/K1L,-0.0032,1/m,TRANSFER_EXTRACTION 
LOGICAL.GTE4QT32/K1L,0.2113,1/m,TRANSFER_EXTRACTION LOGICAL.GTE4QT33/K1L,-0.2073,1/m,TRANSFER_EXTRACTION LOGICAL.GTE4KX3/HKICK,0.0,rad,TRANSFER_EXTRACTION LOGICAL.GTE4KY3/VKICK,0.0015,rad,TRANSFER_EXTRACTION 
GTE3UF_TO_GTS6MU1_BEAM/E_S,3.748E8,eV/u,TRANSFER_EXTRACTION GTE3UF_TO_GTS6MU1_BEAM/Q_S,92,,TRANSFER_EXTRACTION LOGICAL.GTS6MU1/HKICK,0.0,rad,TRANSFER_EXTRACTION 
GTS6MU1_TO_GTS6MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT GTS6MU1_TO_GTS6MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_EXTRACTION 
GTS6MU1_TO_GTS6MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET LOGICAL.GTE5KS1/K2L,0.0,1/m²,TRANSFER_EXTRACTION LOGICAL.GTE5QD11/K1L,0.4,1/m,TRANSFER_EXTRACTION 
LOGICAL.GTE5QD12/K1L,-0.47,1/m,TRANSFER_EXTRACTION LOGICAL.GTE5KY1/VKICK,-0.002,rad,TRANSFER_EXTRACTION GTS6MU1_TO_ESR_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT 
GTS6MU1_TO_ESR_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_EXTRACTION GTS6MU1_TO_ESR_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET LOGICAL.GTE5DSAH/SLIT_BRHODEVIATION_S,--
-,,TRANSFER_EXTRACTION LOGICAL.GTE5DSAH/SLIT_LPOS_S,---,m,TRANSFER_EXTRACTION LOGICAL.GTE5DSAH/SLIT_RPOS_S,---,m,TRANSFER_EXTRACTION LOGICAL.GTE5DGCG/TARGET_INBEAM_B,---,,TRANSFER_EXTRACTION 
LOGICAL.GTE5DGDG/TARGET_INBEAM_B,---,,TRANSFER_EXTRACTION LOGICAL.GTE5MU0/HKICK,0.0015,rad,TRANSFER_EXTRACTION LOGICAL.GTE5QD21/K1L,-0.9,1/m,TRANSFER_EXTRACTION LOGICAL.GTE5QD22/K1L,0.68,1/m,TRANSFER_EXTRACTION 
LOGICAL.GTE5DGAG/TARGET_INBEAM_B,---,,TRANSFER_EXTRACTION 
  69   Sat Apr 2 18:19:47 2022 YuriAcceleratorScraping
Attachment 1: trim.3539D818-8003-4093-866E-2C4F619E614F.MOV
  68   Sat Apr 2 18:17:31 2022 YuriAcceleratorPhoto-Identification
Just a photo of the ID
Attachment 1: 9FFA52AA-1F75-470E-AD1B-E1A612A3F7D6.jpeg
9FFA52AA-1F75-470E-AD1B-E1A612A3F7D6.jpeg
  67   Sat Apr 2 17:47:16 2022 Ken Ueberholz  Telefon, Gästehaus
My guesthouse phone number: 06159-71-2957
  66   Sat Apr 2 16:10:22 2022 Markus, BerndAcceleratorSIS setting complete, U90+ mit Be target: 2022-04-02_16-04-00_SIS18_FAST_E142_20220325_110213.C1.txt
# Version: 1.2
# Comment: ParamModi Export at 2022-04-02T16:04:10.778077+02:00[Europe/Berlin]
# Context: SIS18_FAST_E142_20220325_110213.C1
# Columns: PARAMETERNAME,VALUE,UNIT,BEAMPROCESSPURPOSE
LOGICAL.GTK7MU5/HKICK,0.0,rad,TRANSFER_INJECTION
LOGICAL.GTK7MU5/HKICK_THEO,0.0018,rad,TRANSFER_INJECTION
LOGICAL.GTK7BC1L/HKICK,0.0,rad,TRANSFER_INJECTION
LOGICAL.GTK7BC1L/HKICK_THEO,-0.0035,rad,TRANSFER_INJECTION
LOGICAL.GTK7BC1L/THIGH_S,7.0E-5,s,TRANSFER_INJECTION
GTK3MV4_TO_PLTKMH2_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT
GTK3MV4_TO_PLTKMH2_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_INJECTION
GTK3MV4_TO_PLTKMH2_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET
LOGICAL.GTK9MB1V/BUMPER_VKICK_S,0.0,rad,TRANSFER_INJECTION
LOGICAL.GS12ME1I/ESEP_HKICK_S,0.0,rad,TRANSFER_INJECTION
LOGICAL.GS12ME1I/ESEP_K0L_THEO_S,-0.049,rad,TRANSFER_INJECTION
LOGICAL.GS12MU3I/HKICK,0.0,rad,TRANSFER_INJECTION
LOGICAL.GS12MU3I/K0L_THEO,-0.1535,rad,TRANSFER_INJECTION
PLTKMH2_TO_SIS18_BEAM/MAX_PART_RATE_S,1.0E12,Hz,TRANSFER_INJECTION
PLTKMH2_TO_SIS18_BUMPER/BUMPER_CURVATURE_S,[0, 0],s,TRANSFER_INJECTION
PLTKMH2_TO_SIS18_BUMPER/TFALL_S,1.7E-4,s,TRANSFER_INJECTION
PLTKMH2_TO_SIS18_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT
PLTKMH2_TO_SIS18_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_INJECTION
PLTKMH2_TO_SIS18_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET
LOGICAL.GS00BS1W/ACTIVE_S,false,,RING_EXTRACTION_FAST
LOGICAL.GS00BS1W/QRIPPLE_AMPL_START_S,0.0,V,RING_EXTRACTION_FAST
LOGICAL.GS00BS1W/QRIPPLE_FREQ_START_S,0.0,Hz,RING_EXTRACTION_FAST
LOGICAL.GS01MU1A/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS01MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS06MU4/BYP_HKICK_DELTA_S,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS06MU4/BYP_HKICK_START_S,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS01QS1F/B1L_CHIMNEY_S,6.876008,T,BEAMOUT_RESET
LOGICAL.GS01KM2DV/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS01KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS01QS2D/B1L_CHIMNEY_S,-6.474563,T,BEAMOUT_RESET
LOGICAL.GS02MU1A/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS02MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS02KM2DV/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS02KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS03MU1A/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS03MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS03KH1I/SCALE_B0L_IPM_S,1.0,,RING_INJECTION
LOGICAL.GS03KH1I/SCALE_B0L_IPM_S,---,,RING_RAMP
LOGICAL.GS03KV1I/SCALE_B0L_IPM_S,1.0,,RING_INJECTION
LOGICAL.GS03KV1I/SCALE_B0L_IPM_S,---,,RING_RAMP
LOGICAL.GS03KH2I/SCALE_B0L_IPM_S,1.0,,RING_INJECTION
LOGICAL.GS03KH2I/SCALE_B0L_IPM_S,---,,RING_RAMP
LOGICAL.GS03KV2I/SCALE_B0L_IPM_S,1.0,,RING_INJECTION
LOGICAL.GS03KV2I/SCALE_B0L_IPM_S,---,,RING_RAMP
LOGICAL.GS03KH3I/SCALE_B0L_IPM_S,1.0,,RING_INJECTION
LOGICAL.GS03KH3I/SCALE_B0L_IPM_S,---,,RING_RAMP
LOGICAL.GS03KV3I/SCALE_B0L_IPM_S,1.0,,RING_INJECTION
LOGICAL.GS03KV3I/SCALE_B0L_IPM_S,---,,RING_RAMP
LOGICAL.GS03KM2DV/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS03KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS04MU2A/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS04MU2A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS04ME1E/ACTIVE_S,false,,RING_EXTRACTION_FAST
LOGICAL.GS04KM2DV/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS04KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS05MU1A/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS05MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS05MQ1/K0L_S,0.0,rad,RING_INJECTION
LOGICAL.GS05MQ1/K0L_S,---,rad,RING_RAMP
LOGICAL.GS05MQ1/K0L_S,0.0,rad,RING_PRE_EXTRACTION
LOGICAL.GS05MQ1/K0L_S,---,rad,RING_EXTRACTION_FAST
LOGICAL.GS05MQ1/QKICKER_ACTIVE_B,---,,RING_INJECTION
LOGICAL.GS05MQ1/QKICKER_ACTIVE_B,---,,RING_PRE_EXTRACTION
LOGICAL.GS05KM2DV/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS05KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS06MU2A/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS06MU2A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS06KM2DV/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS06KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS07MU1A/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS07MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS07KM2DV/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS07KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS08MU1A/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS08MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS08KM2DV/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS08KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS09MU1A/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS09MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS09KM2DV/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS09KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS10MU1A/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS10MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS10KX1/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS10KX1/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS10KX2/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS10KX2/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS10KM2DV/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS10KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS11MU1A/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS11MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS11MU2/ACTIVE_S,false,,RING_INJECTION
LOGICAL.GS11MU2/B0L_CHIMNEY_S,4.82717365,Tm,BEAMOUT_RESET
LOGICAL.GS11MU2/MEC_RELDAMPL_S,0.0,,RING_INJECTION
LOGICAL.GS11MU2/MEC_RELDTIME_S,0.0,,RING_INJECTION
LOGICAL.GS11KM2DV/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS11KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS12MU1A/HKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS12MU1A/HKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS12QS1F/B1L_CHIMNEY_S,6.876008,T,BEAMOUT_RESET
LOGICAL.GS12KM2DV/VKICK_COC,0.0,rad,RING_INJECTION
LOGICAL.GS12KM2DV/VKICK_COC,0.0,rad,RING_EXTRACTION_FAST
LOGICAL.GS12QS2D/B1L_CHIMNEY_S,-6.474563,T,BEAMOUT_RESET
LOGICAL.GS12QS3T/B1L_CHIMNEY_S,0.580287,T,BEAMOUT_RESET
SIS18B2B/B2B_KICK_START_OFFSET_S,-2.5E-5,s,RING_EXTRACTION_FAST
SIS18B2B/B2B_MODE_RAW_S,B2EXTRACTION,,RING_EXTRACTION_FAST
SIS18B2B/B2B_PHASE_DIFFERENCE_S,0.0,deg,RING_EXTRACTION_FAST
SIS18B2B/B2B_PREDEFINED_BY_COUPLING_B,true,,RING_EXTRACTION_FAST
SIS18B2B/B2B_TRIGGER_OFFSET_S,8.6,deg,RING_EXTRACTION_FAST
SIS18BEAM/BEAM_MODE_S,1,,RING_INJECTION
SIS18BEAM/BUCKETFILL_RAW_S,[[0.0, 0.0]],,RING_INJECTION
SIS18BEAM/BUCKETFILL_RAW_S,[[0.0, 1.4]],,RING_BUNCHING
SIS18BEAM/BUCKETFILL_RAW_S,[[1.4, 2.0]],,RING_RAMP
SIS18BEAM/BUCKETFILL_RAW_S,[[2.0, 3.0]],,RING_RF_MANIPULATION
SIS18BEAM/BUCKETFILL_RAW_S,[[3.0, 10.0]],,RING_PRE_EXTRACTION
SIS18BEAM/BUCKETFILL_RAW_S,[[10.0, 10.0]],,RING_EXTRACTION_FAST
SIS18BEAM/BUCKETFILL_RAW_S,[[10.0, 10.0]],,RING_POST_EXTRACTION
SIS18BEAM/CHIMNEY_B,true,,BEAMOUT_RESET
SIS18BEAM/CH_END_S,-4.09258183,,RING_INJECTION
SIS18BEAM/CH_END_S,-6.45521578,,RING_RAMP
SIS18BEAM/CH_END_S,---,,RING_PRE_EXTRACTION
SIS18BEAM/CV_END_S,-5.63105355,,RING_INJECTION
SIS18BEAM/CV_END_S,-4.10566257,,RING_RAMP
SIS18BEAM/CV_END_S,---,,RING_PRE_EXTRACTION
SIS18BEAM/DELTAR,-0.001,m,RING_INJECTION
SIS18BEAM/DELTAR,0.0,m,RING_EXTRACTION_FAST
SIS18BEAM/DPFREV,0.0,,RING_INJECTION
SIS18BEAM/DPFREV,0.0,,RING_EXTRACTION_FAST
SIS18BEAM/DP_OVER_P_S,8.0E-4,,RING_INJECTION
SIS18BEAM/ELEMENT_S,92,,RING_INJECTION
SIS18BEAM/E_S,1.1205E7,eV/u,RING_INJECTION
SIS18BEAM/E_S,5.36E8,eV/u,RING_RAMP
SIS18BEAM/FINAL_HARMONIC_S,1,,RING_RF_MANIPULATION
SIS18BEAM/H_S,4,,RING_INJECTION
SIS18BEAM/INJ_EMIH_S,1.5E-4,m*rad,RING_INJECTION
SIS18BEAM/INJ_EMIV_S,5.0E-5,m*rad,RING_INJECTION
SIS18BEAM/ISOTOPE_S,238,,RING_INJECTION
SIS18BEAM/KL_AMPL_S,0.0,,RING_INJECTION
SIS18BEAM/KL_AMPL_S,0.0,,RING_BUNCHING
SIS18BEAM/KL_AMPL_S,0.0,,RING_RAMP
SIS18BEAM/KL_AMPL_S,0.0,,RING_RF_MANIPULATION
SIS18BEAM/KL_AMPL_S,0.0,,RING_PRE_EXTRACTION
SIS18BEAM/KL_AMPL_S,0.0,,RING_EXTRACTION_FAST
SIS18BEAM/KL_AMPL_S,0.0,,RING_POST_EXTRACTION
SIS18BEAM/KL_HARM_S,1,,RING_INJECTION
SIS18BEAM/KL_HARM_S,1,,RING_BUNCHING
SIS18BEAM/KL_HARM_S,1,,RING_RAMP
SIS18BEAM/KL_HARM_S,1,,RING_RF_MANIPULATION
SIS18BEAM/KL_HARM_S,1,,RING_PRE_EXTRACTION
SIS18BEAM/KL_HARM_S,1,,RING_EXTRACTION_FAST
SIS18BEAM/KL_HARM_S,1,,RING_POST_EXTRACTION
SIS18BEAM/KL_OFFSET_S,0.0,,RING_INJECTION
SIS18BEAM/KL_OFFSET_S,0.0,,RING_BUNCHING
SIS18BEAM/KL_OFFSET_S,0.0,,RING_RAMP
SIS18BEAM/KL_OFFSET_S,0.0,,RING_RF_MANIPULATION
SIS18BEAM/KL_OFFSET_S,0.0,,RING_PRE_EXTRACTION
SIS18BEAM/KL_OFFSET_S,0.0,,RING_EXTRACTION_FAST
SIS18BEAM/KL_OFFSET_S,0.0,,RING_POST_EXTRACTION
SIS18BEAM/KL_PHASE_S,0.0,deg,RING_INJECTION
SIS18BEAM/KL_PHASE_S,0.0,deg,RING_BUNCHING
SIS18BEAM/KL_PHASE_S,0.0,deg,RING_RAMP
SIS18BEAM/KL_PHASE_S,0.0,deg,RING_RF_MANIPULATION
SIS18BEAM/KL_PHASE_S,0.0,deg,RING_PRE_EXTRACTION
SIS18BEAM/KL_PHASE_S,0.0,deg,RING_EXTRACTION_FAST
SIS18BEAM/KL_PHASE_S,0.0,deg,RING_POST_EXTRACTION
SIS18BEAM/NPARTICLES_S,1.0E8,,RING_INJECTION
SIS18BEAM/QH_END_S,4.27,,RING_INJECTION
SIS18BEAM/QH_END_S,4.27,,RING_RAMP
SIS18BEAM/QH_END_S,4.3,,RING_PRE_EXTRACTION
SIS18BEAM/QV_END_S,3.24,,RING_INJECTION
SIS18BEAM/QV_END_S,3.24,,RING_RAMP
SIS18BEAM/QV_END_S,3.14,,RING_PRE_EXTRACTION
SIS18BEAM/Q_S,73,,RING_INJECTION
SIS18BTM/BTM_DELAYS_INPUT_S,[],s,RING_INJECTION
SIS18BTM/BTM_DELAYS_INPUT_S,[],s,RING_EXTRACTION_FAST
SIS18BTM/BTM_DEVICES_INPUT_S,[],,RING_INJECTION
SIS18BTM/BTM_DEVICES_INPUT_S,[],,RING_EXTRACTION_FAST
SIS18BTM/BTM_EVENTS_INPUT_S,[],,RING_INJECTION
SIS18BTM/BTM_EVENTS_INPUT_S,[],,RING_EXTRACTION_FAST
SIS18BTM/BTM_EXTRACTION_POINTS_INPUT_S,[],,RING_INJECTION
SIS18BTM/BTM_EXTRACTION_POINTS_INPUT_S,[],,RING_EXTRACTION_FAST
SIS18BUMPER/BUMPER_CURVATURE_S,[0, 0],s,RING_INJECTION
SIS18BUMPER/BUMPER_KNOB_S,70.0,mm,RING_INJECTION
SIS18BUMPER/BUMPER_RELDSLOPE_S,0.0,,RING_INJECTION
SIS18BUMPER/TFALL_S,1.8E-4,s,RING_INJECTION
SIS18EKICKER/KICKER_KNOB_S,6.5,mrad,RING_EXTRACTION_FAST
SIS18EKICKER/KICKER_MODE_S,1,,RING_EXTRACTION_FAST
SIS18EKICKER/KICKER_START_S,76.5,deg,RING_EXTRACTION_FAST
SIS18EKICKER/KICKER_TOFFSET1_S,2.0E-6,s,RING_EXTRACTION_FAST
SIS18EKICKER/NBUNCH1_INPUT_S,4,,RING_EXTRACTION_FAST
SIS18EKICKER/TGX_TIMING_TRIGGERED_B,---,,RING_EXTRACTION_FAST
SIS18IPM/IPM_ACTIVE_B,false,,RING_INJECTION
SIS18IPM/IPM_PLANE_S,HORIZONTAL,,RING_INJECTION
SIS18OPTICS/OPTIC_NAME_S,SIS18_STANDARD_OPTICS_TABLE,,RING_INJECTION
SIS18OPTICS/SIGMA_S,0.0,,RING_INJECTION
SIS18OPTICS/SIGMA_S,0.0,,RING_RAMP
SIS18OPTICS/SIGMA_S,0.0,,RING_PRE_EXTRACTION
SIS18OPTICS/TAU_ENDPOINT_S,0.0,,RING_RAMP
SIS18OPTICS/TAU_ENDPOINT_S,0.0,,RING_PRE_EXTRACTION
SIS18OPTICS/TAU_END_S,0.0,,RING_INJECTION
SIS18OPTICS/TAU_END_S,1.0,,RING_RAMP
SIS18OPTICS/TAU_END_S,1.0,,RING_PRE_EXTRACTION
SIS18OPTICS/TAU_NLP_S,0.0,,RING_RAMP
SIS18OPTICS/TAU_NLP_S,0.0,,RING_PRE_EXTRACTION
SIS18ORBIT/AMPL_ECB_CORR,0.0,,RING_INJECTION
SIS18ORBIT/COH01,0.009000000000000001,m,RING_INJECTION
SIS18ORBIT/COH01,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COH02,-0.004,m,RING_INJECTION
SIS18ORBIT/COH02,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COH03,-0.006,m,RING_INJECTION
SIS18ORBIT/COH03,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COH04,0.008,m,RING_INJECTION
SIS18ORBIT/COH04,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COH05,-0.004,m,RING_INJECTION
SIS18ORBIT/COH05,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COH06,-0.003,m,RING_INJECTION
SIS18ORBIT/COH06,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COH07,0.005,m,RING_INJECTION
SIS18ORBIT/COH07,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COH08,-0.003,m,RING_INJECTION
SIS18ORBIT/COH08,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COH09,0.004,m,RING_INJECTION
SIS18ORBIT/COH09,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COH10,0.008,m,RING_INJECTION
SIS18ORBIT/COH10,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COH11,-0.004,m,RING_INJECTION
SIS18ORBIT/COH11,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COH12,-0.01,m,RING_INJECTION
SIS18ORBIT/COH12,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COV01,0.005,m,RING_INJECTION
SIS18ORBIT/COV01,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COV02,0.004,m,RING_INJECTION
SIS18ORBIT/COV02,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COV03,-0.004,m,RING_INJECTION
SIS18ORBIT/COV03,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COV04,-0.002,m,RING_INJECTION
SIS18ORBIT/COV04,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COV05,0.005,m,RING_INJECTION
SIS18ORBIT/COV05,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COV06,-0.004,m,RING_INJECTION
SIS18ORBIT/COV06,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COV07,0.0,m,RING_INJECTION
SIS18ORBIT/COV07,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COV08,0.0,m,RING_INJECTION
SIS18ORBIT/COV08,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COV09,0.0,m,RING_INJECTION
SIS18ORBIT/COV09,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COV10,0.002,m,RING_INJECTION
SIS18ORBIT/COV10,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COV11,-0.004,m,RING_INJECTION
SIS18ORBIT/COV11,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/COV12,-0.004,m,RING_INJECTION
SIS18ORBIT/COV12,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/EXTESEP_START_S,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/EXTMSEP_START_S,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/EXT_ESMS_START_S,0.0,m,RING_EXTRACTION_FAST
SIS18ORBIT/XANG_ECB,0.0,rad,RING_INJECTION
SIS18ORBIT/XPOS_ECB,-0.001,m,RING_INJECTION
SIS18ORBIT/YANG_ECB,0.0,rad,RING_INJECTION
SIS18ORBIT/YPOS_ECB,0.0,m,RING_INJECTION
SIS18QKICKER/QKICKER_EVENT_POSITION_S,0.5,,RING_INJECTION
SIS18QKICKER/QKICKER_EVENT_POSITION_S,0.5,,RING_PRE_EXTRACTION
SIS18RF/BUNCH_ROTATE_ACTIVE_B,false,,RING_EXTRACTION_FAST
SIS18RF/BUNCH_ROTATE_OFFSET_S,9.999999999999999E-5,s,RING_EXTRACTION_FAST
SIS18RF/CAVITYPATTERN_S,[true, false, false, true, true],,RING_INJECTION
SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_INJECTION
SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_BUNCHING
SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_RAMP
SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_RF_MANIPULATION
SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_PRE_EXTRACTION
SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_EXTRACTION_FAST
SIS18RF/CAVITY_MODE_2D_RAW_S,[],,RING_POST_EXTRACTION
SIS18RF/CAVITY_TRANSFER_B,false,,RING_INJECTION
SIS18RF/DUALH_ACTIVE_S,false,,RING_INJECTION
SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_INJECTION
SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_BUNCHING
SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_RAMP
SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_RF_MANIPULATION
SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_PRE_EXTRACTION
SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_EXTRACTION_FAST
SIS18RF/DUALH_RAW_S,[[-1.0, -1.0]],,RING_POST_EXTRACTION
SIS18RF/PHASE_CHANGE_B,false,,RING_INJECTION
SIS18RF/PHASE_OFFSET_S,40.0,deg,RING_INJECTION
SIS18RF/RF_MANIPULATION_RAW_S,[],,RING_RAMP
SIS18RF/RF_MANIPULATION_RAW_S,[],,RING_RF_MANIPULATION
SIS18RF/RF_MANIPULATION_TIMES_S,---,s,RING_RAMP
SIS18RF/RF_MANIPULATION_TIMES_S,[0.065, 0.085],s,RING_RF_MANIPULATION
SIS18RF/SEQUENTIAL_RF_B,false,,RING_INJECTION
SIS18RF/SIS18_STANDARD_RF_MANI_ENUM_S,REBUNCHING,,RING_RF_MANIPULATION
SIS18RF/USE_CAVITY_MODE_MAP_B,true,,RING_INJECTION
SIS18SYSTEM/GENERATE_MASP_MASKED_DEVICES_B,true,,RING_INJECTION
SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_INJECTION
SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_BUNCHING
SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_RAMP
SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_RF_MANIPULATION
SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_PRE_EXTRACTION
SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_EXTRACTION_FAST
SIS18SYSTEM/MASP_MASKED_DEVICES_INPUT_S,---,,RING_POST_EXTRACTION
SIS18TIMEPARAM/BDOT_S,[2.0, 2.0],T/s,BEAMOUT_INIT
SIS18TIMEPARAM/BDOT_S,[3.0, 3.0],T/s,RING_RAMP
SIS18TIMEPARAM/BDOT_S,[4.0, 4.0],T/s,BEAMOUT_RESET
SIS18TIMEPARAM/BP_INDEX_B,[false, false, false],,RING_INJECTION
SIS18TIMEPARAM/BP_INDEX_S,[-1, -1, -1],,RING_INJECTION
SIS18TIMEPARAM/CHOPPER_OFFSET_S,6.0E-5,s,RING_INJECTION
SIS18TIMEPARAM/EVENT_B,[false, false, false],,RING_INJECTION
SIS18TIMEPARAM/EVENT_ID_S,[0, 0, 0],,RING_INJECTION
SIS18TIMEPARAM/MINPDIST_S,0.0,,BEAMOUT_INIT
SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_INJECTION
SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_BUNCHING
SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_RAMP
SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_RF_MANIPULATION
SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_PRE_EXTRACTION
SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_EXTRACTION_FAST
SIS18TIMEPARAM/MINPDIST_S,0.0,,RING_POST_EXTRACTION
SIS18TIMEPARAM/MINPDIST_S,0.0,,BEAMOUT_RESET
SIS18TIMEPARAM/NINJECTIONS_S,1,,RING_INJECTION
SIS18TIMEPARAM/OFFSET_S,[0.0, 0.0, 0.0],s,RING_INJECTION
SIS18TIMEPARAM/TGRID_S,0.002,s,BEAMOUT_INIT
SIS18TIMEPARAM/TGRID_S,0.002,s,RING_INJECTION
SIS18TIMEPARAM/TGRID_S,0.002,s,RING_BUNCHING
SIS18TIMEPARAM/TGRID_S,0.002,s,RING_RAMP
SIS18TIMEPARAM/TGRID_S,0.002,s,RING_RF_MANIPULATION
SIS18TIMEPARAM/TGRID_S,0.002,s,RING_PRE_EXTRACTION
SIS18TIMEPARAM/TGRID_S,0.002,s,RING_EXTRACTION_FAST
SIS18TIMEPARAM/TGRID_S,0.002,s,RING_POST_EXTRACTION
SIS18TIMEPARAM/TGRID_S,0.002,s,BEAMOUT_RESET
SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT
SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_INJECTION
SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_BUNCHING
SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_RAMP
SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_PRE_EXTRACTION
SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_EXTRACTION_FAST
SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,RING_POST_EXTRACTION
SIS18TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET
SIS18TIMEPARAM/TMEASURE_S,0.0,s,BEAMOUT_INIT
SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_INJECTION
SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_BUNCHING
SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_RAMP
SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_RF_MANIPULATION
SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_PRE_EXTRACTION
SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_EXTRACTION_FAST
SIS18TIMEPARAM/TMEASURE_S,0.0,s,RING_POST_EXTRACTION
SIS18TIMEPARAM/TMEASURE_S,0.0,s,BEAMOUT_RESET
SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,BEAMOUT_INIT
SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_INJECTION
SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_BUNCHING
SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_RAMP
SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_RF_MANIPULATION
SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_PRE_EXTRACTION
SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_EXTRACTION_FAST
SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,RING_POST_EXTRACTION
SIS18TIMEPARAM/TROUND_S,[0.032, 0.032],s,BEAMOUT_RESET
SIS18TIMEPARAM/T_BP_LENGTH_S,0.17200000000000001,s,BEAMOUT_INIT
SIS18TIMEPARAM/T_BP_LENGTH_S,0.5,s,RING_INJECTION
SIS18TIMEPARAM/T_BP_LENGTH_S,0.032,s,RING_BUNCHING
SIS18TIMEPARAM/T_BP_LENGTH_S,0.08,s,RING_RAMP
SIS18TIMEPARAM/T_BP_LENGTH_S,0.16,s,RING_RF_MANIPULATION
SIS18TIMEPARAM/T_BP_LENGTH_S,0.04,s,RING_PRE_EXTRACTION
SIS18TIMEPARAM/T_BP_LENGTH_S,0.016,s,RING_EXTRACTION_FAST
SIS18TIMEPARAM/T_BP_LENGTH_S,0.04,s,RING_POST_EXTRACTION
SIS18TIMEPARAM/T_BP_LENGTH_S,0.084,s,BEAMOUT_RESET
SIS18TIMEPARAM/T_WAIT_CHIMNEY_S,1.0,s,BEAMOUT_RESET
SIS18TIMEPARAM/T_WAIT_S,0.04,s,BEAMOUT_INIT
SIS18TIMEPARAM/T_WAIT_S,0.0,s,RING_INJECTION
SIS18TIMEPARAM/T_WAIT_S,0.0,s,RING_BUNCHING
SIS18TIMEPARAM/T_WAIT_S,0.04,s,RING_RAMP
SIS18TIMEPARAM/T_WAIT_S,0.0,s,RING_RF_MANIPULATION
SIS18TIMEPARAM/T_WAIT_S,0.0,s,RING_PRE_EXTRACTION
SIS18TIMEPARAM/T_WAIT_S,0.0,s,RING_EXTRACTION_FAST
SIS18TIMEPARAM/T_WAIT_S,0.0,s,RING_POST_EXTRACTION
SIS18TIMEPARAM/T_WAIT_S,0.04,s,BEAMOUT_RESET
SIS18TIMEPARAM/UNILAC_BREQ_OFFSET_S,-0.046,s,RING_INJECTION
SIS18TIMEPARAM/UNILAC_NOBEAM_INPUT_S,false,,RING_INJECTION
SIS18TIMEPARAM/UNILAC_NO_REQUEST_B,false,,RING_INJECTION
SIS18TIMEPARAM/UNILAC_TOFFSET_S,4.5E-5,s,RING_INJECTION
SIS18TIMEPARAM/UNILAC_VIRTACC_RAW_S,9,,RING_INJECTION
LOGICAL.GSCEKY2G/TOROID_I,5.6826,A,ECOOLER_COOLING
LOGICAL.GSCEKY4K/TOROID_I,5.6826,A,ECOOLER_COOLING
LOGICAL.GSCEMT4K/SOLENOID_I,360.402,A,ECOOLER_COOLING
LOGICAL.GSCEBG1E/DELUACC_S,110.0,V,ECOOLER_COOLING
LOGICAL.GSCEBG1E/UACC_START_END_S,[6413.9328, 6413.9328],V,ECOOLER_COOLING
LOGICAL.GSCEBG2T/U_GUN_START_END_S,[1667.5698, 1667.5698],V,ECOOLER_COOLING
LOGICAL.GSCEBG3T/U_AN_START_END_S,[700.0, 700.0],V,ECOOLER_COOLING
LOGICAL.GSCEBG4T/U_SUPPR_START_END_S,[530.0, 530.0],V,ECOOLER_COOLING
LOGICAL.GSCEBG5T/U_S,3000.0,V,ECOOLER_COOLING
LOGICAL.GSCEBG1D/U_S,0.0,V,ECOOLER_COOLING
LOGICAL.GSCEBG2D/U_S,0.0,V,ECOOLER_COOLING
LOGICAL.GSCEBG3D/U_START_END_S,[800.0, 800.0],V,ECOOLER_COOLING
LOGICAL.GSCEBG4D/U_START_END_S,[800.0, 800.0],V,ECOOLER_COOLING
LOGICAL.GSCEMO5K/SOLENOID_GUN_I,382.077,A,ECOOLER_COOLING
LOGICAL.GSCEKX1G/STEERER_POS_S,-0.002,m,ECOOLER_COOLING
LOGICAL.GSCEKY1G/STEERER_POS_S,0.002,m,ECOOLER_COOLING
LOGICAL.GSCEKX3C/STEERER_ANG_S,5.0E-4,rad,ECOOLER_COOLING
LOGICAL.GSCEKY3C/STEERER_ANG_S,-2.0E-4,rad,ECOOLER_COOLING
LOGICAL.GSCEKX5K/STEERER_POS_S,0.002,m,ECOOLER_COOLING
LOGICAL.GSCEKY5K/STEERER_POS_S,-0.002,m,ECOOLER_COOLING
LOGICAL.GSCEKD1D/SOLENOID_I,0.682,A,ECOOLER_COOLING
LOGICAL.GSCEKD2D/SOLENOID_I,2.35,A,ECOOLER_COOLING
LOGICAL.SIS18_COOLER_EAUX/BETAE_S,0.1537,,ECOOLER_COOLING
LOGICAL.SIS18_COOLER_EAUX/NERF_S,1.7612405761647664E13,1/m³,ECOOLER_COOLING
LOGICAL.SIS18_COOLER_EAUX/UACC_S,6146.806,V,ECOOLER_COOLING
LOGICAL.SIS18_COOLER_EAUX/USC_START_END_S,[157.1268, 157.1268],V,ECOOLER_COOLING
SIS18_COOLER_EBEAM/BT,0.06,T,ECOOLER_COOLING
SIS18_COOLER_EBEAM/ECOOLER_ACTIVE_B,true,,ECOOLER_COOLING
SIS18_COOLER_EBEAM/EXPF_S,3.0,,ECOOLER_COOLING
SIS18_COOLER_EBEAM/GAMME_USER,1.001,,ECOOLER_COOLING
SIS18_COOLER_EBEAM/IE_S,0.2,A,ECOOLER_COOLING
SIS18_COOLER_EBEAM/OVERWRITE_GAMME_B,false,,ECOOLER_COOLING
SIS18_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT
SIS18_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,ECOOLER_COOLING
SIS18_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,STATIC
SIS18_COOLER_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET
LOGICAL.GTE1KY1/VKICK,-0.0022,rad,TRANSFER_EXTRACTION
LOGICAL.GTE1QD11/K1L,0.2017,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE1QD12/K1L,-0.2374,1/m,TRANSFER_EXTRACTION
LOGICAL.GTS1MU1/HKICK,0.0,rad,TRANSFER_EXTRACTION
SIS18_TO_GTS1MU1_OPTICS/OPTIC_NAME_S,SIS18_TE_ESR_LEGACY,,TRANSFER_EXTRACTION
SIS18_TO_GTS1MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT
SIS18_TO_GTS1MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_EXTRACTION
SIS18_TO_GTS1MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET
LOGICAL.GTE2KX1/HKICK,-0.002,rad,TRANSFER_EXTRACTION
LOGICAL.GTE2QT11/K1L,0.2487,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE2QT12/K1L,-0.4301,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE2QT13/K1L,0.3493,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE3MU1/HKICK,-0.001,rad,TRANSFER_EXTRACTION
GTS1MU1_TO_GTE3MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT
GTS1MU1_TO_GTE3MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_EXTRACTION
GTS1MU1_TO_GTE3MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET
LOGICAL.GTE3KY1/VKICK,0.0,rad,TRANSFER_EXTRACTION
LOGICAL.GTE3QD11/K1L,0.4885,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE3QD12/K1L,-0.5615,1/m,TRANSFER_EXTRACTION
GTE3MU1_TO_GTE3UF_BEAM/E_S,5.36E8,eV/u,TRANSFER_EXTRACTION
GTE3MU1_TO_GTE3UF_BEAM/Q_S,73,,TRANSFER_EXTRACTION
GTE3MU1_TO_GTS6MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT
GTE3MU1_TO_GTS6MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_EXTRACTION
GTE3MU1_TO_GTS6MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET
LOGICAL.GTE3UF/OVERWRITE_TARGET_EOUT_B,true,,TRANSFER_EXTRACTION
LOGICAL.GTE3UF/TARGET_E_USER_S,3.748E8,eV/u,TRANSFER_EXTRACTION
LOGICAL.GTE3UF/TARGET_INBEAM_B,true,,TRANSFER_EXTRACTION
LOGICAL.GTE3UF/TARGET_PROPAGATE_B,true,,TRANSFER_EXTRACTION
LOGICAL.GTE3UF/TARGET_Q_PROD_S,92,,TRANSFER_EXTRACTION
LOGICAL.GTE4QD11/K1L,-0.5625,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE4QD12/K1L,0.4554,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE4MU1/HKICK,0.0011,rad,TRANSFER_EXTRACTION
LOGICAL.GTE4KY1/VKICK,-6.0E-4,rad,TRANSFER_EXTRACTION
LOGICAL.GTE4QT21/K1L,0.3805,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE4QT22/K1L,-0.4588,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE4QT23/K1L,0.2175,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE4MU2/HKICK,-3.0E-4,rad,TRANSFER_EXTRACTION
LOGICAL.GTE4KY2/VKICK,0.0,rad,TRANSFER_EXTRACTION
LOGICAL.GTE4QT31/K1L,-0.0032,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE4QT32/K1L,0.2113,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE4QT33/K1L,-0.2073,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE4KX3/HKICK,0.0,rad,TRANSFER_EXTRACTION
LOGICAL.GTE4KY3/VKICK,0.0015,rad,TRANSFER_EXTRACTION
GTE3UF_TO_GTS6MU1_BEAM/E_S,3.748E8,eV/u,TRANSFER_EXTRACTION
GTE3UF_TO_GTS6MU1_BEAM/Q_S,92,,TRANSFER_EXTRACTION
LOGICAL.GTS6MU1/HKICK,0.0,rad,TRANSFER_EXTRACTION
GTS6MU1_TO_GTS6MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT
GTS6MU1_TO_GTS6MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_EXTRACTION
GTS6MU1_TO_GTS6MU1_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET
LOGICAL.GTE5KS1/K2L,0.0,1/m²,TRANSFER_EXTRACTION
LOGICAL.GTE5QD11/K1L,0.4,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE5QD12/K1L,-0.47,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE5KY1/VKICK,-0.002,rad,TRANSFER_EXTRACTION
GTS6MU1_TO_ESR_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_INIT
GTS6MU1_TO_ESR_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,TRANSFER_EXTRACTION
GTS6MU1_TO_ESR_TIMEPARAM/TIMING_IS_LENGTH_CHANGED_S,true,,BEAMOUT_RESET
LOGICAL.GTE5DSAH/SLIT_BRHODEVIATION_S,---,,TRANSFER_EXTRACTION
LOGICAL.GTE5DSAH/SLIT_LPOS_S,---,m,TRANSFER_EXTRACTION
LOGICAL.GTE5DSAH/SLIT_RPOS_S,---,m,TRANSFER_EXTRACTION
LOGICAL.GTE5DGCG/TARGET_INBEAM_B,---,,TRANSFER_EXTRACTION
LOGICAL.GTE5DGDG/TARGET_INBEAM_B,---,,TRANSFER_EXTRACTION
LOGICAL.GTE5MU0/HKICK,0.0015,rad,TRANSFER_EXTRACTION
LOGICAL.GTE5QD21/K1L,-0.9,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE5QD22/K1L,0.68,1/m,TRANSFER_EXTRACTION
LOGICAL.GTE5DGAG/TARGET_INBEAM_B,---,,TRANSFER_EXTRACTION
LOGICAL.GTE5DGBG/TARGET_INBEAM_B,---,,TRANSFER_EXTRACTION
  65   Sat Apr 2 15:54:32 2022 CarstenAcceleratorESR setup with primary beam and 1cm Be plate + Schottky data on NTCAP
MArkus and Bernd have setup the ESR with the thick stripper foil and put the ion beam (238U92+) on the central orbit.

SIS Energy is 536 MeV/u
ESR cooler is 207.1keV (according to the multimeter in the HKR)
Bunching frequency is 3.89329 MHz
Scrapers in event mode are working.
We are now taking a Schotty spectrum with the NTCAP DAQ
(IQ_2022-04-02-15-52-58 )-The lines are not yet positioned on the Schottky resonance.
center 243.4MHz, 10MIQs, -25dBm
  64   Sat Apr 2 10:22:21 2022 Rui-Jiu Chen, RaganGeneralBeam is in the ESR
Primary beam is in the ESR now. Markus and the team are tuning the ESR.
  63   Sat Apr 2 05:08:00 2022 KristianGeneralMorning shift
I see no updates in the log. Is the morning shift taking place?

For now I will stay at home and be on call. I can be at GSI in 20 min. Please let me know the status.

01575 8731537
  62   Sat Apr 2 01:27:25 2022 Jan GloriusRunstest runs 02.04.2022
Beam settings:
primary beam 
copper stripper
I_el=300mA
U_el=205.490kV (Ohm_labs)
3.5e7 ions at injection


MSCF/ADC settings: 
ch2 < Mid PMT x10
ch6 < Mid PMT x100
see attachment (setting_e142....) for detailed MSCF settings

Files/Runs [DAQ2]:

------------------new file-----------------
229Th0022.lmd
bunched beam [ESR in manip. at 7]
beam scraped using detector drives
-SA pos: 0
-NA pos: -10
-Ni pos: 40

no corresponding file in DAQ1

------------------new file-----------------
229Th0023.lmd
bunched beam [ESR in manip. at 7]
beam scraped using detector drives
-SA pos: 0
-NA pos: -10
-Ni pos: 40
laser scan active:
- steps: 21
- cycles: 5

file in DAQ1:
...7768.lmd

------------------new file-----------------
229Th0024.lmd
bunched beam [ESR in manip. at 7]
beam scraped using detector drives
-SA pos: out (-127)
-NA pos: -10
-Ni pos: 40
laser scan active:
- steps: 21
- cycles: 5

file in DAQ1:
...7770.lmd

------------------new file-----------------
229Th0025.lmd
bunched beam [ESR in manip. at 7]
beam scraped using detector drives
-SA pos: 0
-NA pos: -10
-Ni pos: 40
laser scan not:

VUPROM -> delay stop trigger ch12 

file in DAQ1:
no file

no laser scan

------------------new file-----------------
229Th0026.lmd
bunched beam [ESR in manip. at 7]
beam scraped using detector drives
-SA pos: 0
-NA pos: -10
-Ni pos: 40
laser scan active:
- steps: 21
- cycles: 5

VUPROM -> delay stop trigger ch12 

file in DAQ1:
...7772.lmd
Attachment 1: setting_e142.1648855568
1648855568
Sat Apr  2 01:26:08 CEST 2022
e127pi:mrcc:mscf2:getGainCommon 15
e127pi:mrcc:mscf2:getShapingTimeCommon 0
e127pi:mrcc:mscf2:getThresholdCommon 200
e127pi:mrcc:mscf2:getPzCommon  255
e127pi:mrcc:mscf2:getGain1     15
e127pi:mrcc:mscf2:getGain2     10
e127pi:mrcc:mscf2:getGain3     15
e127pi:mrcc:mscf2:getGain4     15
e127pi:mrcc:mscf2:getShapingTime1 0
e127pi:mrcc:mscf2:getShapingTime2 0
e127pi:mrcc:mscf2:getShapingTime3 0
e127pi:mrcc:mscf2:getShapingTime4 1
e127pi:mrcc:mscf2:getThreshold1 255
e127pi:mrcc:mscf2:getThreshold2 2
e127pi:mrcc:mscf2:getThreshold3 200
e127pi:mrcc:mscf2:getThreshold4 200
e127pi:mrcc:mscf2:getThreshold5 222
e127pi:mrcc:mscf2:getThreshold6 2
e127pi:mrcc:mscf2:getThreshold7 200
e127pi:mrcc:mscf2:getThreshold8 200
e127pi:mrcc:mscf2:getThreshold9 222
e127pi:mrcc:mscf2:getThreshold10 255
e127pi:mrcc:mscf2:getThreshold11 255
e127pi:mrcc:mscf2:getThreshold12 255
e127pi:mrcc:mscf2:getThreshold13 100
e127pi:mrcc:mscf2:getThreshold14 255
e127pi:mrcc:mscf2:getThreshold15 255
e127pi:mrcc:mscf2:getThreshold16 255
e127pi:mrcc:mscf2:getPz1       100
e127pi:mrcc:mscf2:getPz2       100
e127pi:mrcc:mscf2:getPz3       100
e127pi:mrcc:mscf2:getPz4       100
e127pi:mrcc:mscf2:getPz5       100
e127pi:mrcc:mscf2:getPz6       100
e127pi:mrcc:mscf2:getPz7       100
e127pi:mrcc:mscf2:getPz8       100
e127pi:mrcc:mscf2:getPz9       100
e127pi:mrcc:mscf2:getPz10      100
e127pi:mrcc:mscf2:getPz11      100
e127pi:mrcc:mscf2:getPz12      100
e127pi:mrcc:mscf2:getPz13      100
e127pi:mrcc:mscf2:getPz14      100
e127pi:mrcc:mscf2:getPz15      100
e127pi:mrcc:mscf2:getPz16      100
e127pi:mrcc:mscf2:getSingleChMode 1
e127pi:mrcc:mscf2:getRcMode    1
e127pi:mrcc:mscf2:getAutoPZ    18
e127pi:mrcc:mscf2:getMultiplicityHi 8
e127pi:mrcc:mscf2:getMultiplicityLo 0
e127pi:mrcc:mscf2:getSumTrgThresh 18
e127pi:mrcc:mscf2:getBlrOn     1
e127pi:mrcc:mscf2:getCoincTime 121
e127pi:mrcc:mscf2:getThreshOffset 70
e127pi:mrcc:mscf2:getShaperOffset 35
e127pi:mrcc:mscf2:getBlrThresh 25
e127pi:mrcc:mscf2:getECLDelay  18
  Draft   Sat Apr 2 01:02:39 2022 Carsten Test measurements with two DAQs
We do two measurements:

One measurement using the 
  60   Fri Apr 1 23:47:45 2022 CarstenDetectorsPMT thresholds / PMT north does not allow voltage abow ~ -1kV
Checked thresholds of PMT with beam and without beam.

The PMT "south" which is now at the gas-jet target has burst-like pulses with a train of many short pulses of duration of about 1us. The signals are taken out of the ADC of the 2nd DAQ (but are still in the VUPROM TDC).

The PMT "middle" (broad-band VUV) has a quite high count rate of about 4-kHz at a few 10e7;; ions in the ring. The rate is very low without ions in the ring but it does not fully scale to low intensities.
At low intensities of a few 10e5;; we still have more than 100 Hz.
For a PMT voltage of -1800V a threshold of 20mV was set which is ok an d we leave it


Note: We see a noise beat of 6ns and 55ns with amplitude of about 15mV to 20mV. The high frequency disappears if we use a battery scope.

PMT "north" small-band VUV
We tried to put the voltage to the wanted level of -2500V. It was not possible to set a voltage higher than about -1000V. WIth this voltage the PMT draw a current of about 200uA and at a voltage above this value it dropped to zero and switched off.
We need to have a closer look at the PMT in the ESR tomorrow with some specialist knowledge.
  59   Fri Apr 1 23:12:37 2022 PatrickDetectorsScraper positions "only primary beam"

Scraper positions where there is only primary beam for detector tests. Use only one outer and one inner scraper at the same time.
Move detectors out before new beam!

outer:
GE02DD2_G: 0mm
GE01DD2AG: -10mm

inner:
GE01DD2IG: 40mm
  58   Fri Apr 1 22:01:14 2022 KonstantinDetectorsPMT operating voltages
> During the testing of the PMTs the following operating voltages were applied:
>
> PMT Cu: -1300V
> PMT Nord: -2500V
> PMT Mitte: -1800V
> PMT Süd: -1800V
>
> Further optimization will be necessary during background measurements.

Currently, PMT Süd shows a strange behavior resulting in after-pulses up to 1µs. Therefore, the high-voltage was reduced to -1500 V.
However, the after-pulses remain. This should be investigated in more detail at some other point.
  57   Fri Apr 1 18:30:38 2022 CarstenDetectorsPositions / Voltages threshlds for particle detectors
DC beam 238U92+ (205kV, e-beam)
We used the detector NA_SZ to determine the central primary-beam (238U92+) position by observing the Schottky-signal while moving the detector inside.

The beam position is 43 mm (wehre the beam is almost gone").

NA_SZ
In the pocket of the NA_SZ we mounted the thick "old pilot U" scintilator since the original one foreseen is defect, see other post.
CFD Model CAEN N853
800V position 20mm pulse height 1V
750V position 10mm pulse height 0.82V, CFD, Ch7, 247, (247mV according to manual)

SA_SZ
Check positions and voltages of the detector behind the cooler
Yesterday the setting of the scope was x10, so the values written in that post were wrong.
At present we position -20, 1400V, pulseheight 1C, CFD, Ch6, 250 (250mV according to manual)

Scraping from the inside with NI_SZ touches the primary ion beam at 28 and destroys the beam at 27 mm. Thus, the beam presently is on a very inner orbit.
  56   Fri Apr 1 18:19:58 2022 KristianCalibrationHV divider
We checked the strange behavior of the HV dividers again. The Ohmlabs and the PTB divider are in good agreement at 120 kV and 150 kV. There, both dividers deviated by 0.35% from the value on the HKR multimeter. Ohmlabs divider yields higher voltage.

At higher voltages (180 kV, 195 kV and 205 kV) the PTB divider showed jumps. The deviation between Ohmlabs divider and set value increased at higher voltages up to 2 %.  Ohmlabs divider was fluctuating at 10 V scale but center was stable.

We removed the PTB divider.

Afterwards, the fluctuation of the Ohmlabs divider are at the 1 V level. Deviation between Ohmlabs divider and set value is now 0.35 % at 205 kV. Same as in the low voltage range with the well-working PTB divider.
  55   Fri Apr 1 16:46:33 2022 CarstenDetectorsAll pressuzied air drives are tested now and are working properly
All pressuzied air drives are tested now and are working properly
  54   Fri Apr 1 15:52:23 2022 RodolfoDetectorsUV PMT South
The "Solar Blind PMT" labeled as "PMT South" has been installed by Simon and Max in the gas target chamber on a CaF Viewport. The PMT is pointing directly to the center chamber.

- I have covered the support of the PMT and the flange with additional aluminum foil in order to try to reduce the straight light.
- I will check the signal of the PMT as soon as the lighting inside the cave will be turned off.

Bild: R. Sánchez
Attachment 1: PMT_Sued_Target.jpg
PMT_Sued_Target.jpg
  53   Fri Apr 1 15:27:00 2022 RodolfoDetectorsNitrogen for UV-PMTs
There was a question concerning the nitrogen we use to rinse the "Solar Blind PMTs".

- I have checked the nitrogen flow rate this afternoon (14:00) and it was a level of 0.2 LPM.
- I have increased this now to 0.4 LPM.

In the pictures below you can see where the "fine tunning" valves are located.

Bilder: R. Sánchez
Attachment 1: Stickstoff_f_PMTs.jpg
Stickstoff_f_PMTs.jpg
Attachment 2: Stickstoff_Flussrate.jpg
Stickstoff_Flussrate.jpg
  52   Fri Apr 1 11:19:57 2022 Rui-Jiu ChenDAQS.M.A.R.T check on NTCAP
S.M.A.R.T. check has been done on NTCAP on March 28th. All 12 hard disk drivers  are normal.
Attachment 1: image001(04-01-11-10-06).jpg
image001(04-01-11-10-06).jpg
  51   Fri Apr 1 11:00:41 2022 Rui-Jiu ChenDAQStart NTCAP
Start taking data with NTCAP.
Carrier Frequency: 245MHz
IQ rate:5 MSamples/s
Reference level -0 dBm.
RF - Attenuation:40 dB
IF attenuation: 19.9288 dB

Date Files:
Samples/Record:2^18=262144
Records/File:2^12=4096
Masterpath: p:\E142\iq\IQ_2022-03-30_09-39-26
p:\E142\sc\SC_2022-03-30_09-39-26

Free space: o diver: 34.9TB.  p driver: 34.8TB.
  50   Fri Apr 1 02:29:40 2022 Carsten ESR Cooler crashed
ESR cooler crashed. We could not restart the cooler. Since we had several other problems, we stop now.
  49   Fri Apr 1 01:57:12 2022 KristianDAQTiming
with bunched primary beam (bunching frequency 1.94070 MHz) we have strong PMT (mid) and particle detector signal. Time between both detectors was measured (in 3.3ns bins)

Particle Det ;  PMT (rising edge)
305 ; 256
227 ; 179
150 ; 102
73 ; 24


PD and PMT signal is second plot. Laser timing was not adjusted jet since it will change with Th beam. 
Attachment 1: Particle-PMT_Mid.png
Particle-PMT_Mid.png
Attachment 2: PMT-PD.png
PMT-PD.png
Attachment 3: IMG_20220331_235846.jpg
IMG_20220331_235846.jpg
  47   Fri Apr 1 00:27:27 2022 Carsten Settings Particle Detectors /Tests with primary beam
All the beam settings will be given in a separate post.

We have 238U92+ centered in the ring with typically a few times 10&#8311; ions.

SA_SZ (GE02DD2_G): Voltage 1200 V, Recomnied peak was scraped at about -50 mm, set the detector position to -25 mm 
We see very clean signals with amplitude 1,5V (Foto will follow). Threshhold: CFD "25" arb. units. count rate 8kHz - 10 kHz
Rise time 6ns (with all the cables).

NA_SZ (GE01DD2AG): No signals - cables in the ESR need to be checked

NI_SZ (GE01DD2IG): Can not be positioned, error from Control system: "Auftr. Stattus position set value out of range", Drive can however be positioned to the "Endlage innen" and "Endlage außen".

The Test above were with a DC beam. With a bunched beam we more rapidly loose the ions with the particle detector.
  46   Thu Mar 31 22:41:35 2022 KristianCalibrationHV divider
We noticed a difference in the electron cooler high voltage:

The set voltage is ~205 kV, the Ohmlabs divider measures 207 kV and the PTB200 shows a value of ~212 kV. The latter is doing some crazy jumps of up to 10 kV, see screenshot. The Ohmlabs divider is stable

Maybe some small discharges? 
Attachment 1: HV-divider2.png
HV-divider2.png
  45   Thu Mar 31 22:19:14 2022 KristianDAQHow To Start MBS
(MBS server should be running at the LXG1297 machine. If not you will get an error message. Then start the server - last command in console)

Just enter the following commands in the console of any PC

ssh atplaser@r4l-41
    ThE142_2022
resl
cd mbsrun/th22
mbs
@startup
connect rfio lxg1297 -disk
open file lxg1297:/data.local2/BeamTimeTh22/229Thor -auto -rfio
sta ac




To stop MBS enter the following commands

sto ac
close file
disconnect rfio
@shutdown
exit
resl
  44   Thu Mar 31 20:07:47 2022 ShahabDAQSchottky Display in AP Messhütte (or anywhere else)
UPDATE: 16.05.2022

Please use ATPPC029 instead of ATPPC019 for the 245 MHz Schottky
Alternatively you can use ATPPC030 for viewing the 410 Schottky

we let this setting go for a while, in case of problems we go back to the settings below.

Bests

Shahab



----------------------------------------------------------------------------



Schottky can be displayed using GSI's standard remote desktop connection from any standard GSI computer that is connected or registered with GSI's
cable network.



On windows choose --> remote desktop connection
On Linux choose --> KRDC or from command line prompt you cab also use XFREERDP)
On Apple choose --> Microsoft Remote Desktop



  • then connect using experiment account using RDP protocol:

    atlaser@atppc019.gsi.de
    enter password


    on desktop there is an icon called "SignalVu Schottky"

    On the menu --> Instrument --> Connect --> USB device

    245 MHz resonator: RSA607A::B021694
    410 MHz resonator: RSA607A::B021705


    by default you can use the 245 MHz resonator.

    default setting is set to 244 MHz and span 20 MHz, if there is a beam in ESR you will see it.


    have fun!




  • https://apps.apple.com/us/app/microsoft-remote-desktop/id1295203466?mt=12


    if you like to use xfreerdp, here is the syntax:

    xfreerdp -g 2560x1420 -u atplaser atppc019.campus.gsi.de
  • Attachment 1: 04_PM_schottky.png
    04_PM_schottky.png
      43   Thu Mar 31 17:56:32 2022 KonstantinDAQPhotodiode test signal
    We used a signal generator to provide a 4MHz dummy-RF signal. This was divided by a factor of 2 for laser-"bunch" synchronization and by a factor of 200 for to provide the stop-tigger attached to the DAQ. With this Dummy-RF we were able to measure the relative arrival times of the laser at the photodiodes located in the laser towers. Note that the signal of the southern photodiode arrives first. This is because the scale of the time axis is given in (10/3ns)-bins since the last common-stop.
    Attachment 1: Timing_Photodiodes.png
    Timing_Photodiodes.png
      42   Thu Mar 31 15:53:50 2022 KonstantinDetectorsControl software for XUV and copper mirror detector
    > Attached you find a manual for the software used to control the movement of the XUV detector and the copper mirror detector. 
    > The software is also used to set the electrode voltages and coil currents of the XUV detector. 
    
    We tested the remote access to the raspberry pi as explained in the manual attached to the original entry of Volker. It was tested from
    the linux machine LXG1050. Attached you can find a screenshot of the running program.
    Attachment 1: XUV_Cu_GUI.png
    XUV_Cu_GUI.png
      41   Thu Mar 31 13:28:17 2022 Jan GloriusDAQDAQ-2 cabling docu
    newest version V2 - valid since Mo 04.April 2022
    Attachment 1: e142_daq2_cabling.pdf
    e142_daq2_cabling.pdf
    Attachment 2: e142_daq2_cabling_V2.pdf
    e142_daq2_cabling_V2.pdf
    Attachment 3: e142_daq2_cabling_V2.ods
      40   Thu Mar 31 11:49:54 2022 KonstantinDetectorsHV-Supply of particle detectors
    We cross-checked the cabeling of the particle detectors north and south. Particle detector south is connected to channel HV5 at the yellow "ESR Messplatz III" patch-panel. Particle detector north is connected to channel K5 at the green "ESR Messplatz II" patch-panel. Red high voltage power-supply is used to control the voltage.
      39   Wed Mar 30 09:27:15 2022 RodolfoAcceleratorIssue? Scrapers at E-Cooler
    Carsten* forwarded me an E-Mail from Markus yesterday. "Betreff: Scraper im ESR Elektronenkühler"

    - Markus has tried to get moving the scrapers at E-Cooler last week. But he got some issues.
    - The expert (Herr Robert Boywitt, Abteilung BEA) has been contacted and he is working on this issue.
    - The scrapers move in one follows the instructions (please attached screenshot).
    - However it was also noticed that the actuators for the scrapers show now tolerance of "2 mm". Frown This can affect the accuracy and the reproducibility of the ion- and laser-beam positions, e.g the overlap.


    * he was so lazy that he could not post this in the ELog.
    Attachment 1: Schrittmotorsteuerung_ECooler.JPG
    Schrittmotorsteuerung_ECooler.JPG
      38   Tue Mar 29 21:37:13 2022 RodolfoLaserPump Laser
    The gold "reflectors and end plates" of our pump laser (Quanta-Ray PRO) have been exchanged by new ones.

    - Output power after Oscillator and Amplifier (@ 1064 nm): 41 W.
    - Output power after Second harmonic crystal (@ 532 nm): 18.2 W.
    - Aditionally, we (Simon and I) have replaced the axial blowers in the power supply.

    The picture shows the "old" gold reflectors.
    Attachment 1: QRay_GoldReflektoren_2010-2022.jpg
    QRay_GoldReflektoren_2010-2022.jpg
      37   Tue Mar 29 12:47:26 2022 Ken Ueberholz Parameter setting for XUV and copper mirror detector
    Some Default Settings for the XUV 
    Detector. The copper 
    mirror should always move fully in.
    
    Possible positions: Between 0mm and 147mm. 
    Background was 
    very high for anything higher than 100mm 
    in the last 
    experiment. 50mm was optimal. This should 
    be tested again 
    with repaired and modified shields. 
    
    Good default values for the XUV detector 
    parameters have 
    been proven before to be:
    
    Cathode: -5V
    Movable shield: 0V
    Fixed shield: 0V
    Main coil: 8A
    Secondary coil: -2.4A
    
    (negative values set in hardware, only 
    positive software 
    inputs are possible)
      36   Tue Mar 29 12:01:08 2022 RodolfoLaserLaser targets
    I have installed two targets* (size: 2 inches) to monitor the position of the laser beam.

    - The internet cameras can be accessed from any browser, but only inside the GSI-Campus network. Benutzername: admin. Kennwort: 1234

    - Target SO (UV-Laser IN). Internet camera: atpdev005.gsi.de **
    - Target NO (UV-Laser OUT). Internet camera: apdev17.gsi.de
    - To move a specific target "in" or "out" the way just choose the target in the "target control box" and press the green bottom.


    * The material of the target is Frosted Glass (Thorlabs: DG20-15ß00-H2-MD).
    ** The camera hang sometimes.
    Attachment 1: TargetIN_SO.png
    TargetIN_SO.png
    Attachment 2: TargetOUT_NO.png
    TargetOUT_NO.png
    Attachment 3: TargetControlBox.jpg
    TargetControlBox.jpg
      35   Fri Mar 25 14:31:24 2022 RodolfoLaserPhotodiode signal SO in the Messhütte
    Measured at the Panel "Messhütte - Laserhütte", BNC "Fast PD / SO".

    - Average over 256 samples
    Attachment 1: PD_SO_Signal_MH_25-03-2022.PNG
    PD_SO_Signal_MH_25-03-2022.PNG
      34   Thu Mar 24 17:10:33 2022 CarstenDAQDAQ / MBS VUPROM TDC buffer errors
    VUPROM TDC buffer errors potentially due to long TDC common Stop gate (>1ms from div 200).
    Signal piped through coinc. unit gicv es shorter sginal (~200ns). This signal used as common stop seems to have cured the TDC buffer errors..
      33   Thu Mar 24 16:59:35 2022 RodolfoLaserPhotodiode signal SO
    Fast Photodiode signal at the "SO-Bogen" (South-east arc).

    - Average made over 250 samples.
    - The photodiode is placed after two HR (high reflexion) mirrors.
    Attachment 1: FastPD_SO_Signal_24-03-2022.jpg
    FastPD_SO_Signal_24-03-2022.jpg
    Attachment 2: FastPD_SO_24-03-2022.jpg
    FastPD_SO_24-03-2022.jpg
      32   Thu Mar 24 13:27:47 2022 RodolfoDAQDisk space - LXG1297
    In our Linux computer (LXG1297: Laser spectroscopy) we have a Drive with 1.8 TB total disk space. 300 GB are at the moment in use, but I can clean this.

    This computer is located in the "Atomphysik Messhütte".
    Attachment 1: DiskSpace_lxg1297.JPG
    DiskSpace_lxg1297.JPG
      31   Wed Mar 23 16:58:33 2022 V. HannenDetectorsStatus copper mirror and XUV detectors
    Over the past days, the parabolic copper mirror and XUV detectors haven been prepared and tested for the upcoming beamtime (see first attached photo for an overview of the detectors).

    The positioning of the mirror and the cathode of the two detectors in their central positions in the beampipe have been adjusted. To reach this central position, the XUV cathode has to be moved 147 mm out of the parking position, while the parabolic mirror has to be moved by 173 mm. While the parabolic mirror will most probably always be driven the full pathlength to make maximum use of the Doppler shift of the emitted photons, the cathode will be placed somewhere in between parking and beam position to minimize background while still having a good detection efficiency.

    The MCP of the XUV detector is supplied with high voltage using an iseg 2 channel HV supply located in a NIM crate in the laser lab (see second photo). The required voltages are: +2400 V for the anode (upper channel) and +300 V for the MCP front (bottom channel).

    The PMT of the copper mirror detector is supplied with HV by the same module as the PMTs on the new mirror chamber and has to be operated at a voltage of -1300 V.

    The analog signals of both detectors are amplified by a factor 100 inside the ESR and patched through to the "Messhütte". For the MCP, the anode and MCP back signals are used (the MCP front signal is weak and noisy and doesn't give additional information). The MCP back signal has a positive polarity and is inverted in a linear Fan In/Out module in the NIM crate in the laser lab prior to discrimination.

    To trigger the movement of the copper mirror and the cathode from their respective parking positions to the measuring positions and back during each filling cycle of the ESR, two signals labeled "trigger in" and "trigger out" need to be provided from the ESR. These signals have to be connected to the "START" inputs of the gate generator in the Messhütte shown in the third photo. The upper channel processes the "trigger out" signal, the lower channel the "trigger in" signal. From the gate generator the signals are patched to the laser lab, where they are multiplied and converted to TTL in the NIM crate shown in photo 2, and transfered to the detector control box using the adapter on top of the crate. Automatically moving the detectors in and out only works when the control software is running and the "Automation" radio buttons are checked (see software manual in Elog entry 30).

    Still to be done:
    - connecting the analog signals to CFDs in the Messhütte and subsequently to the TDC inputs
    - determining dark count rates when all pressure gauges in the straight section on the detector side of the ESR are switched off
    - check influence of new ion getter pump on the XUV detector dark count rate.

    Should we not be around and help is needed with these detectors call:

    Volker Hannen - 0176 50129187
    Ken Ueberholz - 01578 5999489
    Attachment 1: det-overview.jpg
    det-overview.jpg
    Attachment 2: laserlab-crate.jpg
    laserlab-crate.jpg
    Attachment 3: trigger-module.jpg
    trigger-module.jpg
      30   Wed Mar 23 16:16:42 2022 V. HannenDetectorsControl software for XUV and copper mirror detector
    Attached you find a manual for the software used to control the movement of the XUV detector and the copper mirror detector. 
    The software is also used to set the electrode voltages and coil currents of the XUV detector. 
    Attachment 1: Manual.pdf
    Manual.pdf Manual.pdf Manual.pdf Manual.pdf
      29   Wed Mar 23 15:38:15 2022 CarstenGeneralNot all lights in the ESR can be switched off
    Three of the lights in the ESR cannot be switched off. It seems that these lights are now "emergency lights" (with battery?). We will need to find dark plastik foilor similar to cover those lights during our beam time
      28   Wed Mar 23 11:20:55 2022 SimonDetectorsPMT operating voltages
    During the testing of the PMTs the following operating voltages were applied:
    
    PMT Cu: -1300V
    PMT Nord: -2500V
    PMT Mitte: -1800V
    PMT Süd: -1800V
    
    Further optimization will be necessary during background measurements.
      27   Mon Mar 21 21:48:46 2022 JanDAQMesyTec Shaper Control
    The MesyTec Shaper & Constant Fraction (MSCF) is used to process the PMT/det signals for the ADC in the second DAQ.
    It can be setup on its front panel, but single channel setup is very tedious.
    Remote control of the settings is possible using an epics server and client.
    
    All of the following is done with the "litv-exp" user:
    
    server: atpnuc001 (in the screen session "E142")
    client: lxg1275 
    
    The server should run undisturbed, but in case of a power failure, you can start the server like this:
    > ssh litv-exp@atpnuc001
    > cd e142
    > ./E142_start_ioc.sh
    
    To check server:
    > ssh litv-exp@atpnuc001
    > screen -x (CTRL-a CTRL-d to leave screen)
    
    To connect the client gui for remote control, do:
    > ssh litv-exp@lxg1275
    > E142_epics
    The panel is more or less self-explaining. 
    One thing has to be noted: the Monitor Channel selection is shifted by -1.
    I.e., [ch 1] is button [0], etc.
    
    The MSCF settings can be stored and loaded to/from file by using a bash-script.
    The settings will be saved/loaded from: 
    /u/litv-exp/e142/mscf_settings/
    files names are "setting_e142.<linux_timestamp>"
    
    The scripts are also in /u/litv-exp/e142/mscf_settings/
    use 
    ./mscf_save.sh                   for saving the current settings to a new file
    use 
    ./mscf_load_last.sh              to load the last settings file (by timestamp in the filename) 
    use 
    ./mscf_load_file.sh <filename>   to load the settings of a specific file
      26   Mon Mar 21 17:03:47 2022  DAQChanging code of go4
    Correction: Comments in C/C++ start with // , i.e. forward slash

    //--2022-mm-dd HH:MM comment on the respective change.


    Quote:
    We agreed to indicate changes in the go4 analysis code according to the
    following scheme

    \\--2022-mm-dd HH:MM comment on the respective change.

    Example:

    \\--2022-03-16 16:03 Changed variable N_BUNCHES from 4 to 2

    This should allow to find the most recent changes by using the search
    function of the applied text editor.
      25   Mon Mar 21 16:33:23 2022  DAQChanging code of go4
    We agreed to indicate changes in the go4 analysis code according to the
    following scheme

    \\--2022-mm-dd HH:MM comment on the respective change.

    Example:

    \\--2022-03-16 16:03 Changed variable N_BUNCHES from 4 to 2

    This should allow to find the most recent changes by using the search
    function of the applied text editor.
      24   Mon Mar 21 10:46:18 2022 RodolfoDAQTDC & Scaler description channels
    For the First Vuprom we have the following channel configuration (Stand:21.03.2021).

    Please note 1.
    - CH 0 to CH 15 are the TDC channels
    - CH 16 to CH 31 are the SCALER channels

    Please note 2.
    This is still under construction
    Attachment 1: Screenshot_TLdaInputDescription_21-03-2022.JPG
    Screenshot_TLdaInputDescription_21-03-2022.JPG
      23   Mon Mar 21 09:18:28 2022 RodolfoAcceleratorPressure at North-East Arc
    Our vacuum expert has reply. The "IZ Pump" in this region was off.


    Quote:
    The pressure at the north-east arc of ESR, where the laser window is located, looks suspicious. The sensor E01LF02 shows a value of 7.26E-8 mbar. For comparison I have also upload a photo taken on 07.02.2022 where the pressure was 4.62E-10. We have contacted the vacuum expert and asked for his opinion. Waiting for the reply ...

    Bilder: R. Sánchez
      22   Fri Mar 18 16:58:26 2022 RodolfoAcceleratorPressure at North-East Arc
    The pressure at the north-east arc of ESR, where the laser window is located, looks suspicious. The sensor E01LF02 shows a value of 7.26E-8 mbar. For comparison I have also upload a photo taken on 07.02.2022 where the pressure was 4.62E-10. We have contacted the vacuum expert and asked for his opinion. Waiting for the reply ...

    Bilder: R. Sánchez
    Attachment 1: Druck_E01LF02_18-03-2022.jpg
    Druck_E01LF02_18-03-2022.jpg
    Attachment 2: Druck_E01LF02_07-02-2022.jpg
    Druck_E01LF02_07-02-2022.jpg
      21   Fri Mar 18 16:51:27 2022 CarstenDAQMain DAQ /MBS error
    MBS error "TDC data ready wait" solved. Common stop trigger (20 kHz) was missing. (according to Sebastian)
      20   Fri Mar 18 09:18:38 2022 RodolfoAcceleratorVacuum leak, ODR
    After the beaking out process we got a vacuum leak in one of the MgF2 windows (Referenz: PMT South) of the optical detection region (ODR) Stand 17.03.2022. In order to avoid breaking the vacuum again and a second beaking out process we had to spread vacuum seal on the window.

    The window shows now no leaks, Stand 18.03.2022. We are allowed to install a detector on this viewport, as soon as the detector does not have contact with the window (we got the consent of our vacuum expert). Bild: K. König.
    Attachment 1: MgF2-Window_VACSeal.jpg
    MgF2-Window_VACSeal.jpg
      19   Thu Mar 17 17:56:33 2022 KristianCalibrationHV dividers
    PTB HV dividers arrived. Divider ratios are:
    
    PT120:          12003,341 
    PT200.1:        19859,033 
    Ohmlabs:        248517
    Attachment 1: Bericht_PTB_verbesserter_Teiler_2018.pdf
    Bericht_PTB_verbesserter_Teiler_2018.pdf Bericht_PTB_verbesserter_Teiler_2018.pdf Bericht_PTB_verbesserter_Teiler_2018.pdf Bericht_PTB_verbesserter_Teiler_2018.pdf Bericht_PTB_verbesserter_Teiler_2018.pdf
      18   Thu Mar 17 17:37:49 2022 RodolfoAcceleratorHigh voltage dividers for E-Cooler
    Two dividers, from PTB-Braunschweig, have been deliver today. We will use them to monitor the electron-cooler voltage in situ.

    - PT120 (up to -120 kV) with scaling factor: 12003.341, and
    - PT200.1 (up to -200 kV) with a scaling factor: 19859,033.

    Tomorrow (Friday 18.3.) we will install them in the Faraday cage at ESR.

    PT120 will be use for the "Channeling experiment" (E137 Bräuning-Demian) and the PT200.1 for the "Thorium experiment" (E142 Brandau).
    Attachment 1: PTB_Spannungsteiler_Mar2022.jpg
    PTB_Spannungsteiler_Mar2022.jpg
      17   Wed Mar 16 12:04:40 2022 KristianDetectorsHV cable to particle detector South
    Checked HV cable to particle detector south. Label is HV2 Scraper. 
    
    Connected to Messplatz III HV5
      16   Wed Mar 16 08:31:52 2022 KristianDAQCheck cables and timing
    Konstantin and I generated a signal in the Messhütte and sent it to the ESR. 
    There, we used a 44m BNC cable that was sufficently long to reach all detectors. 
    Our signal was connected instead of the PMT/PD. Hence, it was a roundtrip measurement.
    In the Messhütte we checked the delay between the generated signal.
    
    PD North 1460(1)ns
    PD South 1455(1)ns
    Particle North 1239(1)ns
    Particle South 1179(1)ns
    UV North 1322(1)ns
    UV Middle 1322(1)ns
    UV South 1321(1)ns
    Cu 1322(1)ns
    
    We also checked the time delay of our cable to the detectors by measuring the reflection of the unterminated cable. 
    Function generator to detector: 1520(5)/2 ns
    Function generator to scope: 5.1(5) ns
    Total: 765(3) ns
      15   Thu Mar 10 15:20:26 2022 Jan DAQanalog branch signal patches to Messhütte
    The additional signals from PMTs and XUV detector needed for spectroscopic analysis in the second DAQ are patched to AP Messhütte (MH) via the red patch panel at the inside of the target region. The patch channels F1 to F8 (also labeled A to H in red on white) are used and extended by a cable bundle to reach below the mirror chamber. Inside the MH the signals arrive at the red patch panel and are forwarded to the blue patch panel close to the laser DAQ using channels 1 to 8 (also labeled A to H).
     
    The entire connection for these 8 channels from the mirror chamber to the blue panel has been tested with a pulser signal of ~115mV amplitude. After transfer the amplitude has decreased to ~40mV, see also attached fotos.
    
    The signal transport time from the mirror chamber to the blue panel is ~407 ns. This was measured by patching a logic puls from ESR to MH and back to ESR, as show in the delay_ESR... foto attached.  
    Attachment 1: red_panel_ESR.jpg
    red_panel_ESR.jpg
    Attachment 2: pulser_signal_ESR.jpg
    pulser_signal_ESR.jpg
    Attachment 3: pulser_signal_MH.jpg
    pulser_signal_MH.jpg
    Attachment 4: delay_ESR-MH-ESR.jpg
    delay_ESR-MH-ESR.jpg
    Attachment 5: cable_bundle_mirror_chamber.jpg
    cable_bundle_mirror_chamber.jpg
      14   Thu Mar 3 21:39:21 2022 RodolfoLaserDye solution, DCM in Ethanol and DMSO
    I have prepared a new dye solution of DCM in Ethanol and DMSO (1:1). The concentration of the "oscillator + preamplifier" is 0,3 g/l. The concentration of the "main amplifier" is 0,0375 g/l or "1/8" the concentration of the "oscillator".

    Using 500 mJ pump energy (@ 532 nm) I get 120 mJ ouf of the dye laser (@ 640 nm). After the Frequency Conversion Unit I get 32 mJ (@ 320 nm).

    Because the Biochemielabor will be not accessible during the first days of the Thorium beamtime, I have prepared enough reservoir for 7 days (assuming the laser system will run 24/7).
    Attachment 1: FarbstoffVorrat_Thorium.jpg
    FarbstoffVorrat_Thorium.jpg
      13   Thu Mar 3 17:34:42 2022 RodolfoLaserPump Laser
    We have issues with our Pump Laser (Spectra Physics - Quanta Ray Pro). After the service made on mid Dezember (2021) the laser does not get started. After contacting the service many times, the technicians think it can be an issue with the flashlamps.

    - Flashlamps installed technician on 15.12.2021: FAILED.
    - Flashlamps installed by Rodolfo on 21.01.2022: FAILED.
    - Flashlamps installed by Rodolfo on 08.02.2022: WORK, however

    the power is dropping extremelly fast. The measured power on 08.02.2022 was 21.6 W. On 01.03.2022 we measured 17,8 W (for 2.7 Millon shots). The flashlamps should stand 30 Millon shots without losing too much power.
    Attachment 1: QRAY_Simmern.jpg
    QRAY_Simmern.jpg
      12   Thu Mar 3 17:21:26 2022 RodolfoDetectorsMgF2 Windows
    New reentrance viewports made of MgF2 have been installed at the ESR "Optical Detection Region". In the middle the old window (also MgF2) was kept into place.
    Attachment 1: ESR_Schaufenster_Spiegelkammer_10-02-2022.jpg
    ESR_Schaufenster_Spiegelkammer_10-02-2022.jpg
      11   Thu Mar 3 13:50:45 2022 RodolfoLaserDye cell cracket
    The "20 mm" dye cell used for the Oscillator and Pramplifier got damage. I supposed it was produced by the pump beam hitting on a very "old" dye solution (DCM / Ethanol, concentration 0,3 g/l). The solution in the dye reservoir was more 12 months old.
    Attachment 1: Cobra_Farbstoffzelle_08-02-2022.jpg
    Cobra_Farbstoffzelle_08-02-2022.jpg
      10   Fri Nov 19 15:50:44 2021 RodolfoAcceleratorLaser windows at E-Cooler side
    New laser viewports have been installed at the E-Cooler side of the ESR.



      9   Fri Nov 5 17:23:23 2021 RodolfoDAQDye trigger out
    The dye laser offers different scan settings (see pages 65 - 67 of the user manual). We are using the following setting, see attached screenshot, to produce the status "laser busy" for the DAQ.



    This Output Trigger CH1 is then strobed coincidence with the 1 MHz clock.
      8   Thu Oct 14 10:21:46 2021 RodolfoDetectorsDismounting Cu-Mirror
    We have dismounted the parabolic Cu-Mirror at ESR on 13.10.2021 
    Attachment 1: AusbauCuSpiegel_2021.jpg
    AusbauCuSpiegel_2021.jpg
      Draft   Wed Sep 8 21:44:55 2021 RodolfoGeneralPreparation
    StatusArbeitspaketKommentare
    Laser und Laserlabor
    ***FarbstofflaserElektronik wurde erneut.
      6   Fri Aug 6 10:40:54 2021 RodolfoDAQmbs in atplaser
    The "MBS program" (data acquisition) is now located within atplaser@r4l-41, in the folder "th21":


    R4L-41 atplaser > pwd
    /esr/usr/atplaser/mbsrun/th21

    R4L-41 atplaser > ls -l
    total 412
    -rw-r--r-- 1 atplaser esr 3326 Jul 21 13:42 #Makefile#
    -rw-r--r-- 1 atplaser esr 18675 Jul 19 10:43 #f_user.c.lc21wlv#
    -rwxr--r-- 1 atplaser esr 3324 Jul 21 13:17 Makefile
    -rw-r--r-- 1 atplaser esr 2803 Jul 13 10:59 Makefile.lynx
    -rw-r--r-- 1 atplaser esr 3324 Jul 13 10:59 Makefile.test
    drwxr-xr-x 2 atplaser esr 4096 Jul 13 10:59 dump
    -rw-r--r-- 1 atplaser esr 8032 Aug 2 13:06 f_user.c
    -rw-r--r-- 1 atplaser esr 18673 Jul 14 10:39 f_user.c.lc21wlv
    -rw-r--r-- 1 atplaser esr 6368 Jul 21 11:01 f_user.c.lynx
    -rwxr--r-- 1 atplaser esr 18843 Jul 23 11:09 f_user_wlvc.c
    -rw-r--r-- 1 atplaser esr 49 Jul 13 10:59 filenum.set
    -rw-r--r-- 1 atplaser esr 8181 Jul 13 10:59 include
    -rwxr-xr-x 1 atplaser esr 162908 Aug 2 13:07 m_read_meb
    -rw-rw-rw- 1 atplaser esr 81056 Aug 5 19:07 mbslog.l
    drwxr-xr-x 2 atplaser esr 4096 Jul 13 10:59 scom
    -rw-r--r-- 1 atplaser esr 13154 Jul 13 10:59 setup.usf
    -rw-r--r-- 1 atplaser esr 94 Jul 13 10:59 shutdown.scom
    -rw-r--r-- 1 atplaser esr 320 Jul 13 10:59 st.scom
    -rw-r--r-- 1 atplaser esr 290 Jul 22 15:23 startup.scom
    -rw-r--r-- 1 atplaser esr 525 Jul 13 10:59 startup.scom.lynx
    drwxr-xr-x 2 atplaser esr 4096 Jul 13 10:59 suha
    -rw-r--r-- 1 atplaser esr 18999 Jul 13 10:59 vuprom_tdc_v5.h


    Note: This MBS-Version was used previously by Sebastian in "laser cooling 21".
      5   Fri Aug 6 10:23:00 2021 RodolfoDAQatplaser on r4l-41
    The user atplaser is now existing on the R4L-XY nodes for the ESR group.

    R4 = RIO4 Computer
    L = Linux
    XY = node number.

    The laser experiments are using the node XY = 41, which is located in the ESR Messhütte. From a Linux terminal one can access this node by using

    $ ssh atplaser@r4l-41
      4   Mon Aug 2 10:54:44 2021 RodolfoLaserQuanta Ray - Water leak in the power supply
    After fixing the broken water connector in the laser head a new water leak appeared in the Quanta-Ray power supply.

    We found the leak in the water pump flow line (arrow up). We took the water connectors appart, rebuilt the teflon seeling and put the water connectors back again.

    Laser is back in operation.
    Attachment 1: QRAY_WaterPump.jpg
    QRAY_WaterPump.jpg
      3   Wed Jul 28 13:31:22 2021 RodolfoGeneralAir filters
    Filters (Hepa-) inside the flow boxes have been replaced.
    Attachment 1: Flowbox_Filters.png
    Flowbox_Filters.png
      2   Mon Jul 26 17:58:52 2021 RodolfoLaserWater Filters
    The water filters (deioninzing and particle) have been replaced.
    Attachment 1: QRAY_DeionizingFilter.jpg
    QRAY_DeionizingFilter.jpg
      1   Mon Jul 26 17:15:47 2021 RodolfoLaserQuanta Ray - Water leak
    On Thursday afternoon (22.07.2021) a water connector has broken and water has been spilled in the laser head. 
    Attachment 1: QRAY_AnschlussGeplatzt.jpg
    QRAY_AnschlussGeplatzt.jpg
    ELOG V3.1.5-fc6679b